Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {Ownable} from "solady/src/auth/Ownable.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC20Router} from "./interfaces/IERC20Router.sol";

contract ApprovalProxy is Ownable {
    using SafeERC20 for IERC20;

    error ArrayLengthsMismatch();
    error ERC20TransferFromFailed();
    error NativeTransferFailed();

    event RouterUpdated(address newRouter);

    address public router;

    receive() external payable {}

    constructor(address _owner, address _router) {
        _initializeOwner(_owner);
        router = _router;
    }

    /// @notice Withdraw function in case funds get stuck in contract
    function withdraw() external onlyOwner {
        _send(msg.sender, address(this).balance);
    }

    /// @notice Set the router address
    /// @param _router The address of the router contract
    function setRouter(address _router) external onlyOwner {
        router = _router;

        emit RouterUpdated(_router);
    }

    /// @notice Transfer tokens to ERC20Router and perform multicall in a single tx
    /// @dev This contract must be approved to transfer msg.sender's tokens to the ERC20Router
    /// @param tokens An array of token addresses to transfer
    /// @param amounts An array of token amounts to transfer
    /// @param targets An array of target addresses to pass to the multicall
    /// @param datas An array of calldata to pass to the multicall
    /// @param values An array of msg values to pass to the multicall
    /// @param refundTo The address to refund any leftover ETH to
    function transferAndMulticall(
        address[] calldata tokens,
        uint256[] calldata amounts,
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes[] memory) {
        // Revert if array lengths do not match
        if ((tokens.length != amounts.length)) {
            revert ArrayLengthsMismatch();
        }

        // Revert if array lengths do not match (split from above for readability)
        if (targets.length != datas.length || datas.length != values.length) {
            revert ArrayLengthsMismatch();
        }

        // Transfer the tokens to the router
        for (uint256 i = 0; i < tokens.length; i++) {
            IERC20(tokens[i]).safeTransferFrom(msg.sender, router, amounts[i]);
        }

        // Call delegatecallMulticall on the router.
        // @dev The router does not perform a delegatecall. It is called
        //      `delegatecallMulticall` to not break integrations with the
        //      previous router. Note that msg.sender for the calls to targets
        //      will be the router.
        bytes[] memory data = IERC20Router(router).delegatecallMulticall{
            value: msg.value
        }(targets, datas, values, refundTo);

        return data;
    }

    function _send(address to, uint256 value) internal {
        bool success;
        assembly {
            // Save gas by avoiding copying the return data to memory.
            // Provide at most 100k gas to the internal call, which is
            // more than enough to cover common use-cases of logic for
            // receiving native tokens (eg. SCW payable fallbacks).
            success := call(100000, to, value, 0, 0, 0, 0)
        }

        if (!success) {
            revert NativeTransferFailed();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Simple single owner authorization mixin.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/auth/Ownable.sol)
///
/// @dev Note:
/// This implementation does NOT auto-initialize the owner to `msg.sender`.
/// You MUST call the `_initializeOwner` in the constructor / initializer.
///
/// While the ownable portion follows
/// [EIP-173](https://eips.ethereum.org/EIPS/eip-173) for compatibility,
/// the nomenclature for the 2-step ownership handover may be unique to this codebase.
abstract contract Ownable {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The caller is not authorized to call the function.
    error Unauthorized();

    /// @dev The `newOwner` cannot be the zero address.
    error NewOwnerIsZeroAddress();

    /// @dev The `pendingOwner` does not have a valid handover request.
    error NoHandoverRequest();

    /// @dev Cannot double-initialize.
    error AlreadyInitialized();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The ownership is transferred from `oldOwner` to `newOwner`.
    /// This event is intentionally kept the same as OpenZeppelin's Ownable to be
    /// compatible with indexers and [EIP-173](https://eips.ethereum.org/EIPS/eip-173),
    /// despite it not being as lightweight as a single argument event.
    event OwnershipTransferred(address indexed oldOwner, address indexed newOwner);

    /// @dev An ownership handover to `pendingOwner` has been requested.
    event OwnershipHandoverRequested(address indexed pendingOwner);

    /// @dev The ownership handover to `pendingOwner` has been canceled.
    event OwnershipHandoverCanceled(address indexed pendingOwner);

    /// @dev `keccak256(bytes("OwnershipTransferred(address,address)"))`.
    uint256 private constant _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE =
        0x8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0;

    /// @dev `keccak256(bytes("OwnershipHandoverRequested(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE =
        0xdbf36a107da19e49527a7176a1babf963b4b0ff8cde35ee35d6cd8f1f9ac7e1d;

    /// @dev `keccak256(bytes("OwnershipHandoverCanceled(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE =
        0xfa7b8eab7da67f412cc9575ed43464468f9bfbae89d1675917346ca6d8fe3c92;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The owner slot is given by:
    /// `bytes32(~uint256(uint32(bytes4(keccak256("_OWNER_SLOT_NOT")))))`.
    /// It is intentionally chosen to be a high value
    /// to avoid collision with lower slots.
    /// The choice of manual storage layout is to enable compatibility
    /// with both regular and upgradeable contracts.
    bytes32 internal constant _OWNER_SLOT =
        0xffffffffffffffffffffffffffffffffffffffffffffffffffffffff74873927;

    /// The ownership handover slot of `newOwner` is given by:
    /// ```
    ///     mstore(0x00, or(shl(96, user), _HANDOVER_SLOT_SEED))
    ///     let handoverSlot := keccak256(0x00, 0x20)
    /// ```
    /// It stores the expiry timestamp of the two-step ownership handover.
    uint256 private constant _HANDOVER_SLOT_SEED = 0x389a75e1;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                     INTERNAL FUNCTIONS                     */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Override to return true to make `_initializeOwner` prevent double-initialization.
    function _guardInitializeOwner() internal pure virtual returns (bool guard) {}

    /// @dev Initializes the owner directly without authorization guard.
    /// This function must be called upon initialization,
    /// regardless of whether the contract is upgradeable or not.
    /// This is to enable generalization to both regular and upgradeable contracts,
    /// and to save gas in case the initial owner is not the caller.
    /// For performance reasons, this function will not check if there
    /// is an existing owner.
    function _initializeOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                if sload(ownerSlot) {
                    mstore(0x00, 0x0dc149f0) // `AlreadyInitialized()`.
                    revert(0x1c, 0x04)
                }
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(_OWNER_SLOT, newOwner)
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        }
    }

    /// @dev Sets the owner directly without authorization guard.
    function _setOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, newOwner)
            }
        }
    }

    /// @dev Throws if the sender is not the owner.
    function _checkOwner() internal view virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // If the caller is not the stored owner, revert.
            if iszero(eq(caller(), sload(_OWNER_SLOT))) {
                mstore(0x00, 0x82b42900) // `Unauthorized()`.
                revert(0x1c, 0x04)
            }
        }
    }

    /// @dev Returns how long a two-step ownership handover is valid for in seconds.
    /// Override to return a different value if needed.
    /// Made internal to conserve bytecode. Wrap it in a public function if needed.
    function _ownershipHandoverValidFor() internal view virtual returns (uint64) {
        return 48 * 3600;
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  PUBLIC UPDATE FUNCTIONS                   */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Allows the owner to transfer the ownership to `newOwner`.
    function transferOwnership(address newOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(shl(96, newOwner)) {
                mstore(0x00, 0x7448fbae) // `NewOwnerIsZeroAddress()`.
                revert(0x1c, 0x04)
            }
        }
        _setOwner(newOwner);
    }

    /// @dev Allows the owner to renounce their ownership.
    function renounceOwnership() public payable virtual onlyOwner {
        _setOwner(address(0));
    }

    /// @dev Request a two-step ownership handover to the caller.
    /// The request will automatically expire in 48 hours (172800 seconds) by default.
    function requestOwnershipHandover() public payable virtual {
        unchecked {
            uint256 expires = block.timestamp + _ownershipHandoverValidFor();
            /// @solidity memory-safe-assembly
            assembly {
                // Compute and set the handover slot to `expires`.
                mstore(0x0c, _HANDOVER_SLOT_SEED)
                mstore(0x00, caller())
                sstore(keccak256(0x0c, 0x20), expires)
                // Emit the {OwnershipHandoverRequested} event.
                log2(0, 0, _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE, caller())
            }
        }
    }

    /// @dev Cancels the two-step ownership handover to the caller, if any.
    function cancelOwnershipHandover() public payable virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, caller())
            sstore(keccak256(0x0c, 0x20), 0)
            // Emit the {OwnershipHandoverCanceled} event.
            log2(0, 0, _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE, caller())
        }
    }

    /// @dev Allows the owner to complete the two-step ownership handover to `pendingOwner`.
    /// Reverts if there is no existing ownership handover requested by `pendingOwner`.
    function completeOwnershipHandover(address pendingOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            let handoverSlot := keccak256(0x0c, 0x20)
            // If the handover does not exist, or has expired.
            if gt(timestamp(), sload(handoverSlot)) {
                mstore(0x00, 0x6f5e8818) // `NoHandoverRequest()`.
                revert(0x1c, 0x04)
            }
            // Set the handover slot to 0.
            sstore(handoverSlot, 0)
        }
        _setOwner(pendingOwner);
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                   PUBLIC READ FUNCTIONS                    */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns the owner of the contract.
    function owner() public view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            result := sload(_OWNER_SLOT)
        }
    }

    /// @dev Returns the expiry timestamp for the two-step ownership handover to `pendingOwner`.
    function ownershipHandoverExpiresAt(address pendingOwner)
        public
        view
        virtual
        returns (uint256 result)
    {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute the handover slot.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            // Load the handover slot.
            result := sload(keccak256(0x0c, 0x20))
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         MODIFIERS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Marks a function as only callable by the owner.
    modifier onlyOwner() virtual {
        _checkOwner();
        _;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {ISignatureTransfer} from "permit2-relay/src/interfaces/ISignatureTransfer.sol";

interface IERC20Router {
    function permitMulticall(
        address user,
        ISignatureTransfer.PermitBatchTransferFrom memory permit,
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo,
        bytes memory permitSignature
    ) external payable returns (bytes[] memory);

    function delegatecallMulticall(
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes[] memory);

    function cleanupERC20(address token, address refundTo) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IEIP712} from "./IEIP712.sol";

/// @title SignatureTransfer
/// @notice Handles ERC20 token transfers through signature based actions
/// @dev Requires user's token approval on the Permit2 contract
interface ISignatureTransfer is IEIP712 {
    /// @notice Thrown when the requested amount for a transfer is larger than the permissioned amount
    /// @param maxAmount The maximum amount a spender can request to transfer
    error InvalidAmount(uint256 maxAmount);

    /// @notice Thrown when the number of tokens permissioned to a spender does not match the number of tokens being transferred
    /// @dev If the spender does not need to transfer the number of tokens permitted, the spender can request amount 0 to be transferred
    error LengthMismatch();

    /// @notice Emits an event when the owner successfully invalidates an unordered nonce.
    event UnorderedNonceInvalidation(address indexed owner, uint256 word, uint256 mask);

    /// @notice The token and amount details for a transfer signed in the permit transfer signature
    struct TokenPermissions {
        // ERC20 token address
        address token;
        // the maximum amount that can be spent
        uint256 amount;
    }

    /// @notice The signed permit message for a single token transfer
    struct PermitTransferFrom {
        TokenPermissions permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }

    /// @notice Specifies the recipient address and amount for batched transfers.
    /// @dev Recipients and amounts correspond to the index of the signed token permissions array.
    /// @dev Reverts if the requested amount is greater than the permitted signed amount.
    struct SignatureTransferDetails {
        // recipient address
        address to;
        // spender requested amount
        uint256 requestedAmount;
    }

    /// @notice Used to reconstruct the signed permit message for multiple token transfers
    /// @dev Do not need to pass in spender address as it is required that it is msg.sender
    /// @dev Note that a user still signs over a spender address
    struct PermitBatchTransferFrom {
        // the tokens and corresponding amounts permitted for a transfer
        TokenPermissions[] permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }

    /// @notice A map from token owner address and a caller specified word index to a bitmap. Used to set bits in the bitmap to prevent against signature replay protection
    /// @dev Uses unordered nonces so that permit messages do not need to be spent in a certain order
    /// @dev The mapping is indexed first by the token owner, then by an index specified in the nonce
    /// @dev It returns a uint256 bitmap
    /// @dev The index, or wordPosition is capped at type(uint248).max
    function nonceBitmap(address, uint256) external view returns (uint256);

    /// @notice Transfers a token using a signed permit message
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;

    /// @notice Transfers a token using a signed permit message
    /// @notice Includes extra data provided by the caller to verify signature over
    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param witness Extra data to include when checking the user signature
    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash
    /// @param signature The signature to verify
    function permitWitnessTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes32 witness,
        string calldata witnessTypeString,
        bytes calldata signature
    ) external;

    /// @notice Transfers multiple tokens using a signed permit message
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;

    /// @notice Transfers multiple tokens using a signed permit message
    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition
    /// @notice Includes extra data provided by the caller to verify signature over
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param witness Extra data to include when checking the user signature
    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash
    /// @param signature The signature to verify
    function permitWitnessTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes32 witness,
        string calldata witnessTypeString,
        bytes calldata signature
    ) external;

    /// @notice Invalidates the bits specified in mask for the bitmap at the word position
    /// @dev The wordPos is maxed at type(uint248).max
    /// @param wordPos A number to index the nonceBitmap at
    /// @param mask A bitmap masked against msg.sender's current bitmap at the word position
    function invalidateUnorderedNonces(uint256 wordPos, uint256 mask) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IEIP712 {
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "remappings": [
    "@openzeppelin/=lib/openzeppelin-contracts/contracts/",
    "solady/=lib/solady/",
    "multicaller/=lib/Multicaller/",
    "v2-core/=lib/v2-core/",
    "v2-periphery/=lib/v2-periphery/",
    "tstorish/=lib/tstorish/",
    "permit2-relay/=lib/permit2-relay/",
    "solmate/=lib/solmate/",
    "@matterlabs/zksync-contracts/=/lib/v2-testnet-contracts/",
    "@uniswap/v3-core/=lib/v3-core/",
    "@uniswap/v2-core/=lib/v2-core/",
    "0x-settler/=lib/0x-settler/",
    "seaport-1.5/=lib/seaport-1.5/",
    "trustlessPermit/=lib/trustlessPermit/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@rari-capital/solmate/=lib/seaport-1.5/lib/solmate/",
    "Multicaller/=lib/Multicaller/src/",
    "ds-test/=lib/seaport-1.5/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-gas-snapshot/=lib/0x-settler/lib/forge-gas-snapshot/src/",
    "forge-std/=lib/forge-std/src/",
    "murky/=lib/seaport-1.5/lib/murky/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "permit2/=lib/0x-settler/lib/permit2/",
    "seaport-core/=lib/seaport-core/src/",
    "seaport-sol/=lib/seaport-sol/src/",
    "seaport-types/=lib/seaport-core/lib/seaport-types/",
    "seaport/=lib/seaport-sol/lib/seaport/contracts/",
    "solarray/=lib/seaport-1.5/lib/solarray/src/",
    "v3-core/=lib/v3-core/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": true,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_router","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"AlreadyInitialized","type":"error"},{"inputs":[],"name":"ArrayLengthsMismatch","type":"error"},{"inputs":[],"name":"ERC20TransferFromFailed","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"NativeTransferFailed","type":"error"},{"inputs":[],"name":"NewOwnerIsZeroAddress","type":"error"},{"inputs":[],"name":"NoHandoverRequest","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"Unauthorized","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"pendingOwner","type":"address"}],"name":"OwnershipHandoverCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"pendingOwner","type":"address"}],"name":"OwnershipHandoverRequested","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"newRouter","type":"address"}],"name":"RouterUpdated","type":"event"},{"inputs":[],"name":"cancelOwnershipHandover","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"pendingOwner","type":"address"}],"name":"completeOwnershipHandover","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"result","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"pendingOwner","type":"address"}],"name":"ownershipHandoverExpiresAt","outputs":[{"internalType":"uint256","name":"result","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"requestOwnershipHandover","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_router","type":"address"}],"name":"setRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"tokens","type":"address[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"internalType":"address[]","name":"targets","type":"address[]"},{"internalType":"bytes[]","name":"datas","type":"bytes[]"},{"internalType":"uint256[]","name":"values","type":"uint256[]"},{"internalType":"address","name":"refundTo","type":"address"}],"name":"transferAndMulticall","outputs":[{"internalType":"bytes[]","name":"","type":"bytes[]"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000f3d63166f0ca56c3c1a3508fce03ff0cf3fb691e000000000000000000000000eeeeee9ec4769a09a76a83c7bc42b185872860ee

-----Decoded View---------------
Arg [0] : _owner (address): 0xf3d63166F0Ca56C3c1A3508FcE03Ff0Cf3Fb691e
Arg [1] : _router (address): 0xeeeeee9eC4769A09a76A83C7bC42b185872860eE

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000f3d63166f0ca56c3c1a3508fce03ff0cf3fb691e
Arg [1] : 000000000000000000000000eeeeee9ec4769a09a76a83c7bc42b185872860ee