Token Paint

/**
 *Submitted for verification at Etherscan.io on 2021-06-09
*/

// SPDX-License-Identifier: UNLICENSED
// File: @openzeppelin/contracts/utils/Context.sol


pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20Burnable.sol



pragma solidity >=0.6.0 <0.8.0;



/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// File: @openzeppelin/contracts/utils/EnumerableSet.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/access/AccessControl.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context {
    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: contracts/PaintToken.sol


pragma solidity ^0.6.0;







contract PaintToken is ERC20, ERC20Burnable, Ownable, ReentrancyGuard, AccessControl {
    // Create a new role identifier for the minter role
    bytes32 public constant ADMIN_ROLE = keccak256("ADMIN_ROLE");

    // keeping it for checking, whether deposit being called by valid address or not
    address public childChainManagerProxy;

    /** @dev Checks if sender address has admin role
     */
    modifier onlyAdmin() {
        require(hasRole(ADMIN_ROLE, msg.sender), "Does not have admin role");
        _;
    }

    /** @dev Checks if sender is childChainManagerProxy
     */
    modifier onlyChildChainManagerProxy() {
        require(msg.sender == childChainManagerProxy, "Address is not ChildChainManagerProxy");
        _;
    }

    constructor(address _childChainManagerProxy, address[] memory admins) public ERC20("Paint", "PAINT") {
        // can't mint here, because minting in child chain smart contract's constructor not allowed
        // _mint(msg.sender, 10 ** 27);
        for (uint256 i = 0; i < admins.length; ++i) {
            _setupRole(ADMIN_ROLE, admins[i]);
        }
        childChainManagerProxy = _childChainManagerProxy;
    }

    // being proxified smart contract, most probably childChainManagerProxy contract's address
    // is not going to change ever, but still, lets keep it
    function updateChildChainManager(address newChildChainManagerProxy) external onlyAdmin {
        require(newChildChainManagerProxy != address(0), "Bad ChildChainManagerProxy address");

        childChainManagerProxy = newChildChainManagerProxy;
    }

    function deposit(address user, bytes calldata depositData) external nonReentrant onlyChildChainManagerProxy {
        require(user != address(0x0));
        uint256 amount = abi.decode(depositData, (uint256));
        _mint(user, amount);
    }

    function withdraw(uint256 amount) external {
        _burn(_msgSender(), amount);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_childChainManagerProxy","type":"address"},{"internalType":"address[]","name":"admins","type":"address[]"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"childChainManagerProxy","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"bytes","name":"depositData","type":"bytes"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newChildChainManagerProxy","type":"address"}],"name":"updateChildChainManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000a6fa4fb5f76172d178d61b04b0ecd319c5d1c0aa00000000000000000000000000000000000000000000000000000000000000400000000000000000000000000000000000000000000000000000000000000003000000000000000000000000cf90ad693ace601b5b5582c4f95ec7266cdb3eec0000000000000000000000009388517b36b817dccbb663a3097f4c5ffdbecc14000000000000000000000000f7a3bbe1711eb43967cdbf58fa61342a25e3c845

-----Decoded View---------------
Arg [0] : _childChainManagerProxy (address): 0xa6fa4fb5f76172d178d61b04b0ecd319c5d1c0aa
Arg [1] : admins (address[]): 0xcf90ad693ace601b5b5582c4f95ec7266cdb3eec,0x9388517b36b817dccbb663a3097f4c5ffdbecc14,0xf7a3bbe1711eb43967cdbf58fa61342a25e3c845

-----Encoded View---------------
6 Constructor Arguments found :
Arg [0] : 000000000000000000000000a6fa4fb5f76172d178d61b04b0ecd319c5d1c0aa
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000040
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000003
Arg [3] : 000000000000000000000000cf90ad693ace601b5b5582c4f95ec7266cdb3eec
Arg [4] : 0000000000000000000000009388517b36b817dccbb663a3097f4c5ffdbecc14
Arg [5] : 000000000000000000000000f7a3bbe1711eb43967cdbf58fa61342a25e3c845

53986:1970:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13471:91;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15617:169;;;;;;;;;;;;;;;;-1:-1:-1;15617:169:0;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;14570:108;;;:::i;:::-;;;;;;;;;;;;;;;;16268:321;;;;;;;;;;;;;;;;-1:-1:-1;16268:321:0;;;;;;;;;;;;;;;;;;:::i;45662:114::-;;;;;;;;;;;;;;;;-1:-1:-1;45662:114:0;;:::i;55864:89::-;;;;;;;;;;;;;;;;-1:-1:-1;55864:89:0;;:::i;:::-;;46038:227;;;;;;;;;;;;;;;;-1:-1:-1;46038:227:0;;;;;;;;;:::i;14414:91::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;47247:209;;;;;;;;;;;;;;;;-1:-1:-1;47247:209:0;;;;;;;;;:::i;16998:218::-;;;;;;;;;;;;;;;;-1:-1:-1;16998:218:0;;;;;;;;;:::i;55345:255::-;;;;;;;;;;;;;;;;-1:-1:-1;55345:255:0;;;;:::i;54290:37::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;14741:127;;;;;;;;;;;;;;;;-1:-1:-1;14741:127:0;;;;:::i;50647:148::-;;;:::i;54135:60::-;;;:::i;23277:295::-;;;;;;;;;;;;;;;;-1:-1:-1;23277:295:0;;;;;;;;;:::i;49996:87::-;;;:::i;45335:138::-;;;;;;;;;;;;;;;;-1:-1:-1;45335:138:0;;;;;;;:::i;44296:139::-;;;;;;;;;;;;;;;;-1:-1:-1;44296:139:0;;;;;;;;;:::i;13681:95::-;;;:::i;43041:49::-;;;:::i;17719:269::-;;;;;;;;;;;;;;;;-1:-1:-1;17719:269:0;;;;;;;;;:::i;15081:175::-;;;;;;;;;;;;;;;;-1:-1:-1;15081:175:0;;;;;;;;;:::i;44609:127::-;;;;;;;;;;;;;;;;-1:-1:-1;44609:127:0;;:::i;55608:248::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;55608:248:0;;-1:-1:-1;55608:248:0;-1:-1:-1;55608:248:0;:::i;46510:230::-;;;;;;;;;;;;;;;;-1:-1:-1;46510:230:0;;;;;;;;;:::i;15319:151::-;;;;;;;;;;;;;;;;-1:-1:-1;15319:151:0;;;;;;;;;;;:::i;50950:244::-;;;;;;;;;;;;;;;;-1:-1:-1;50950:244:0;;;;:::i;13471:91::-;13549:5;13542:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13516:13;;13542:12;;13549:5;;13542:12;;13549:5;13542:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13471:91;:::o;15617:169::-;15700:4;15717:39;15726:12;:10;:12::i;:::-;15740:7;15749:6;15717:8;:39::i;:::-;-1:-1:-1;15774:4:0;15617:169;;;;;:::o;14570:108::-;14658:12;;14570:108;:::o;16268:321::-;16374:4;16391:36;16401:6;16409:9;16420:6;16391:9;:36::i;:::-;16438:121;16447:6;16455:12;:10;:12::i;:::-;16469:89;16507:6;16469:89;;;;;;;;;;;;;;;;;:19;;;;;;;:11;:19;;;;;;16489:12;:10;:12::i;:::-;16469:33;;;;;;;;;;;;;-1:-1:-1;16469:33:0;;;:89;;:37;:89;:::i;:::-;16438:8;:121::i;:::-;-1:-1:-1;16577:4:0;16268:321;;;;;:::o;45662:114::-;45719:7;45746:12;;;:6;:12;;;;;:22;;;;45662:114::o;55864:89::-;55918:27;55924:12;:10;:12::i;:::-;55938:6;55918:5;:27::i;:::-;55864:89;:::o;46038:227::-;46130:12;;;;:6;:12;;;;;:22;;;46122:45;;46154:12;:10;:12::i;:::-;46122:7;:45::i;:::-;46114:105;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46232:25;46243:4;46249:7;46232:10;:25::i;:::-;46038:227;;:::o;14414:91::-;14488:9;;;;14414:91;:::o;47247:209::-;47345:12;:10;:12::i;:::-;47334:23;;:7;:23;;;47326:83;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47422:26;47434:4;47440:7;47422:11;:26::i;16998:218::-;17086:4;17103:83;17112:12;:10;:12::i;:::-;17126:7;17135:50;17174:10;17135:11;:25;17147:12;:10;:12::i;:::-;17135:25;;;;;;;;;;;;;;;;;;-1:-1:-1;17135:25:0;;;:34;;;;;;;;;;;:50;:38;:50;:::i;55345:255::-;54172:23;;;;;;;;;;;;;;;;54439:31;;54459:10;54439:7;:31::i;:::-;54431:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;55451:39:::1;::::0;::::1;55443:86;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;55542:22;:50:::0;;;::::1;;::::0;;;::::1;::::0;;;::::1;::::0;;55345:255::o;54290:37::-;;;;;;:::o;14741:127::-;14842:18;;14815:7;14842:18;;;;;;;;;;;;14741:127::o;50647:148::-;50227:12;:10;:12::i;:::-;50216:23;;:7;:5;:7::i;:::-;:23;;;50208:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;50738:6:::1;::::0;50717:40:::1;::::0;50754:1:::1;::::0;50738:6:::1;::::0;::::1;50717:40;50738:6;::::0;50717:40:::1;::::0;50754:1;;50717:40:::1;50768:6;:19:::0;;;::::1;::::0;;50647:148::o;54135:60::-;54172:23;;;;;;;;;;;;;;;;54135:60;:::o;23277:295::-;23354:26;23383:84;23420:6;23383:84;;;;;;;;;;;;;;;;;:32;23393:7;23402:12;:10;:12::i;:::-;23383:9;:32::i;:::-;:36;:84;;:36;:84;:::i;:::-;23354:113;;23480:51;23489:7;23498:12;:10;:12::i;:::-;23512:18;23480:8;:51::i;:::-;23542:22;23548:7;23557:6;23542:5;:22::i;:::-;23277:295;;;:::o;49996:87::-;50069:6;;;;;;;;49996:87::o;45335:138::-;45408:7;45435:12;;;:6;:12;;;;;:30;;45459:5;45435:30;:23;:30;:::i;:::-;45428:37;45335:138;-1:-1:-1;;;45335:138:0:o;44296:139::-;44365:4;44389:12;;;:6;:12;;;;;:38;;44419:7;44389:38;:29;:38;:::i;13681:95::-;13761:7;13754:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13728:13;;13754:14;;13761:7;;13754:14;;13761:7;13754:14;;;;;;;;;;;;;;;;;;;;;;;;43041:49;43086:4;43041:49;:::o;17719:269::-;17812:4;17829:129;17838:12;:10;:12::i;:::-;17852:7;17861:96;17900:15;17861:96;;;;;;;;;;;;;;;;;:11;:25;17873:12;:10;:12::i;:::-;17861:25;;;;;;;;;;;;;;;;;;-1:-1:-1;17861:25:0;;;:34;;;;;;;;;;;:96;;:38;:96;:::i;15081:175::-;15167:4;15184:42;15194:12;:10;:12::i;:::-;15208:9;15219:6;15184:9;:42::i;44609:127::-;44672:7;44699:12;;;:6;:12;;;;;:29;;:27;:29::i;55608:248::-;52953:1;53559:7;;:19;;53551:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;52953:1;53692:7;:18;54664:22:::1;::::0;::::1;;54650:10;:36;54642:86;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;55735:20:::2;::::0;::::2;55727:29;;;::::0;::::2;;55767:14;55795:11;;55784:34;;;;;;;::::0;::::2;;-1:-1:-1::0;55784:34:0::2;::::0;-1:-1:-1;55829:19:0::2;55835:4:::0;55784:34;55829:5:::2;:19::i;:::-;-1:-1:-1::0;;52909:1:0;53871:7;:22;-1:-1:-1;;55608:248:0:o;46510:230::-;46603:12;;;;:6;:12;;;;;:22;;;46595:45;;46627:12;:10;:12::i;46595:45::-;46587:106;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15319:151;15435:18;;;;15408:7;15435:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;15319:151::o;50950:244::-;50227:12;:10;:12::i;:::-;50216:23;;:7;:5;:7::i;:::-;:23;;;50208:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;51039:22:::1;::::0;::::1;51031:73;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;51141:6;::::0;51120:38:::1;::::0;::::1;::::0;;::::1;::::0;51141:6:::1;::::0;::::1;;::::0;51120:38:::1;::::0;;;::::1;51169:6;:17:::0;;::::1;::::0;;::::1;;;::::0;;;::::1;::::0;;;::::1;::::0;;50950:244::o;30237:152::-;30307:4;30331:50;30336:3;30356:23;;;30331:4;:50::i;674:106::-;762:10;674:106;:::o;20866:346::-;20968:19;;;20960:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21047:21;;;21039:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21120:18;;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;21172:32;;;;;;;;;;;;;;;;;20866:346;;;:::o;18478:539::-;18584:20;;;18576:70;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18665:23;;;18657:71;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18741:47;18762:6;18770:9;18781:6;18741:20;:47::i;:::-;18821:71;18843:6;18821:71;;;;;;;;;;;;;;;;;:17;;;:9;:17;;;;;;;;;;;;:71;;:21;:71;:::i;:::-;18801:17;;;;:9;:17;;;;;;;;;;;:91;;;;18926:20;;;;;;;:32;;18951:6;18926:32;:24;:32;:::i;:::-;18903:20;;;;:9;:20;;;;;;;;;;;;:55;;;;18974:35;;;;;;;18903:20;;18974:35;;;;;;;;;;;;;18478:539;;;:::o;9463:166::-;9549:7;9585:12;9577:6;;;;9569:29;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;9616:5:0;;;9463:166::o;20010:418::-;20094:21;;;20086:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20166:49;20187:7;20204:1;20208:6;20166:20;:49::i;:::-;20249:68;20272:6;20249:68;;;;;;;;;;;;;;;;;:18;;;:9;:18;;;;;;;;;;;;:68;;:22;:68;:::i;:::-;20228:18;;;:9;:18;;;;;;;;;;:89;20343:12;;:24;;20360:6;20343:24;:16;:24;:::i;:::-;20328:12;:39;20383:37;;;;;;;;20409:1;;20383:37;;;;;;;;;;;;;20010:418;;:::o;48490:188::-;48564:12;;;;:6;:12;;;;;:33;;48589:7;48564:33;:24;:33;:::i;:::-;48560:111;;;48646:12;:10;:12::i;:::-;48619:40;;48637:7;48619:40;;48631:4;48619:40;;;;;;;;;;48490:188;;:::o;48686:192::-;48761:12;;;;:6;:12;;;;;:36;;48789:7;48761:36;:27;:36;:::i;:::-;48757:114;;;48846:12;:10;:12::i;:::-;48819:40;;48837:7;48819:40;;48831:4;48819:40;;;;;;;;;;48686:192;;:::o;6636:179::-;6694:7;6726:5;;;6750:6;;;;6742:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;31523:158;31597:7;31648:22;31652:3;31664:5;31648:3;:22::i;30809:167::-;30889:4;30913:55;30923:3;30943:23;;;30913:9;:55::i;31062:117::-;31125:7;31152:19;31160:3;31152:7;:19::i;19299:378::-;19383:21;;;19375:65;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19453:49;19482:1;19486:7;19495:6;19453:20;:49::i;:::-;19530:12;;:24;;19547:6;19530:24;:16;:24;:::i;:::-;19515:12;:39;19586:18;;;:9;:18;;;;;;;;;;;:30;;19609:6;19586:30;:22;:30;:::i;:::-;19565:18;;;:9;:18;;;;;;;;;;;:51;;;;19632:37;;;;;;;19565:18;;:9;;19632:37;;;;;;;;;;19299:378;;:::o;25301:414::-;25364:4;25386:21;25396:3;25401:5;25386:9;:21::i;:::-;25381:327;;-1:-1:-1;25424:23:0;;;;;;;;:11;:23;;;;;;;;;;;;;25607:18;;25585:19;;;:12;;;:19;;;;;;:40;;;;25640:11;;25381:327;-1:-1:-1;25691:5:0;25684:12;;7098:158;7156:7;7189:1;7184;:6;;7176:49;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;7243:5:0;;;7098:158::o;30565:::-;30638:4;30662:53;30670:3;30690:23;;;30662:7;:53::i;28189:204::-;28284:18;;28256:7;;28284:26;-1:-1:-1;28276:73:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28367:3;:11;;28379:5;28367:18;;;;;;;;;;;;;;;;28360:25;;28189:204;;;;:::o;27521:129::-;27594:4;27618:19;;;:12;;;;;:19;;;;;;:24;;;27521:129::o;27736:109::-;27819:18;;27736:109::o;25891:1544::-;25957:4;26096:19;;;:12;;;:19;;;;;;26132:15;;26128:1300;;26567:18;;26518:14;;;;;26567:22;;;;26494:21;;26567:3;;:22;;26854;;;;;;;;;;;;;;26834:42;;27000:9;26971:3;:11;;26983:13;26971:26;;;;;;;;;;;;;;;;;;;:38;;;;27077:23;;;27119:1;27077:12;;;:23;;;;;;27103:17;;;27077:43;;27229:17;;27077:3;;27229:17;;;;;;;;;;;;;;;;;;;;;;27324:3;:12;;:19;27337:5;27324:19;;;;;;;;;;;27317:26;;;27367:4;27360:11;;;;;;;;26128:1300;27411:5;27404:12;;;;

ipfs://ff12ccd5dfc7d96d0d0c50b7a4b97660eaa31a99d8662f0afc4801c6a04a1411