Token SushiStakingVault

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";
import "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/Address.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Internal function that returns the initialized version. Returns `_initialized`
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Internal function that returns the initialized version. Returns `_initializing`
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../utils/SafeERC20.sol";
import "../../../interfaces/IERC4626.sol";
import "../../../utils/math/Math.sol";

/**
 * @dev Implementation of the ERC4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[EIP-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * CAUTION: Deposits and withdrawals may incur unexpected slippage. Users should verify that the amount received of
 * shares or assets is as expected. EOAs should operate through a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * _Available since v4.7._
 */
abstract contract ERC4626 is ERC20, IERC4626 {
    using Math for uint256;

    IERC20 private immutable _asset;
    uint8 private immutable _decimals;

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC20 or ERC777).
     */
    constructor(IERC20 asset_) {
        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);
        _decimals = success ? assetDecimals : super.decimals();
        _asset = asset_;
    }

    /**
     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.
     */
    function _tryGetAssetDecimals(IERC20 asset_) private returns (bool, uint8) {
        (bool success, bytes memory encodedDecimals) = address(asset_).call(
            abi.encodeWithSelector(IERC20Metadata.decimals.selector)
        );
        if (success && encodedDecimals.length >= 32) {
            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));
            if (returnedDecimals <= type(uint8).max) {
                return (true, uint8(returnedDecimals));
            }
        }
        return (false, 0);
    }

    /**
     * @dev Decimals are read from the underlying asset in the constructor and cached. If this fails (e.g., the asset
     * has not been created yet), the cached value is set to a default obtained by `super.decimals()` (which depends on
     * inheritance but is most likely 18). Override this function in order to set a guaranteed hardcoded value.
     * See {IERC20Metadata-decimals}.
     */
    function decimals() public view virtual override(IERC20Metadata, ERC20) returns (uint8) {
        return _decimals;
    }

    /** @dev See {IERC4626-asset}. */
    function asset() public view virtual override returns (address) {
        return address(_asset);
    }

    /** @dev See {IERC4626-totalAssets}. */
    function totalAssets() public view virtual override returns (uint256) {
        return _asset.balanceOf(address(this));
    }

    /** @dev See {IERC4626-convertToShares}. */
    function convertToShares(uint256 assets) public view virtual override returns (uint256 shares) {
        return _convertToShares(assets, Math.Rounding.Down);
    }

    /** @dev See {IERC4626-convertToAssets}. */
    function convertToAssets(uint256 shares) public view virtual override returns (uint256 assets) {
        return _convertToAssets(shares, Math.Rounding.Down);
    }

    /** @dev See {IERC4626-maxDeposit}. */
    function maxDeposit(address) public view virtual override returns (uint256) {
        return _isVaultCollateralized() ? type(uint256).max : 0;
    }

    /** @dev See {IERC4626-maxMint}. */
    function maxMint(address) public view virtual override returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxWithdraw}. */
    function maxWithdraw(address owner) public view virtual override returns (uint256) {
        return _convertToAssets(balanceOf(owner), Math.Rounding.Down);
    }

    /** @dev See {IERC4626-maxRedeem}. */
    function maxRedeem(address owner) public view virtual override returns (uint256) {
        return balanceOf(owner);
    }

    /** @dev See {IERC4626-previewDeposit}. */
    function previewDeposit(uint256 assets) public view virtual override returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Down);
    }

    /** @dev See {IERC4626-previewMint}. */
    function previewMint(uint256 shares) public view virtual override returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Up);
    }

    /** @dev See {IERC4626-previewWithdraw}. */
    function previewWithdraw(uint256 assets) public view virtual override returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Up);
    }

    /** @dev See {IERC4626-previewRedeem}. */
    function previewRedeem(uint256 shares) public view virtual override returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Down);
    }

    /** @dev See {IERC4626-deposit}. */
    function deposit(uint256 assets, address receiver) public virtual override returns (uint256) {
        require(assets <= maxDeposit(receiver), "ERC4626: deposit more than max");

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-mint}. */
    function mint(uint256 shares, address receiver) public virtual override returns (uint256) {
        require(shares <= maxMint(receiver), "ERC4626: mint more than max");

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /** @dev See {IERC4626-withdraw}. */
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) public virtual override returns (uint256) {
        require(assets <= maxWithdraw(owner), "ERC4626: withdraw more than max");

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-redeem}. */
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) public virtual override returns (uint256) {
        require(shares <= maxRedeem(owner), "ERC4626: redeem more than max");

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     *
     * Will revert if assets > 0, totalSupply > 0 and totalAssets = 0. That corresponds to a case where any asset
     * would represent an infinite amount of shares.
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256 shares) {
        uint256 supply = totalSupply();
        return
            (assets == 0 || supply == 0)
                ? _initialConvertToShares(assets, rounding)
                : assets.mulDiv(supply, totalAssets(), rounding);
    }

    /**
     * @dev Internal conversion function (from assets to shares) to apply when the vault is empty.
     *
     * NOTE: Make sure to keep this function consistent with {_initialConvertToAssets} when overriding it.
     */
    function _initialConvertToShares(
        uint256 assets,
        Math.Rounding /*rounding*/
    ) internal view virtual returns (uint256 shares) {
        return assets;
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256 assets) {
        uint256 supply = totalSupply();
        return
            (supply == 0) ? _initialConvertToAssets(shares, rounding) : shares.mulDiv(totalAssets(), supply, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) to apply when the vault is empty.
     *
     * NOTE: Make sure to keep this function consistent with {_initialConvertToShares} when overriding it.
     */
    function _initialConvertToAssets(
        uint256 shares,
        Math.Rounding /*rounding*/
    ) internal view virtual returns (uint256 assets) {
        return shares;
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(
        address caller,
        address receiver,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        // If _asset is ERC777, `transferFrom` can trigger a reenterancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(_asset, caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If _asset is ERC777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _burn(owner, shares);
        SafeERC20.safeTransfer(_asset, receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _isVaultCollateralized() private view returns (bool) {
        return totalAssets() > 0 || totalSupply() == 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.12;
pragma experimental ABIEncoderV2;

interface IMasterChef {
  struct UserInfo {
    uint256 amount; // How many LP tokens the user has provided.
    uint256 rewardDebt; // Reward debt. See explanation below.
  }

  struct PoolInfo {
    address lpToken; // Address of LP token contract.
    uint256 allocPoint; // How many allocation points assigned to this pool. SUSHI to distribute per block.
    uint256 lastRewardBlock; // Last block number that SUSHI distribution occurs.
    uint256 accSushiPerShare; // Accumulated SUSHI per share, times 1e12. See below.
  }

  event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
  event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);

  function sushi() external view returns (address);

  function userInfo(uint256, address) external view returns (UserInfo memory);

  function pendingSushi(uint256, address) external view returns (uint256);

  function sushiPerBlock() external view returns (uint256);

  function poolLength() external view returns (uint256);

  function poolInfo(uint256 pid) external view returns (PoolInfo memory);

  function totalAllocPoint() external view returns (uint256);

  function deposit(uint256 _pid, uint256 _amount) external;

  function withdraw(uint256 _pid, uint256 _amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.12;
pragma experimental ABIEncoderV2;
import "./IRewarder.sol";
import "./IMasterChef.sol";

interface IMasterChefV2 {
  struct UserInfo {
    uint256 amount;
    uint256 rewardDebt;
  }

  struct PoolInfo {
    uint128 accSushiPerShare;
    uint64 lastRewardTime;
    uint64 allocPoint;
  }

  function SUSHI() external view returns (address);

  function rewarder(uint256) external view returns (IRewarder);

  function lpToken(uint256) external view returns (address);

  function totalAllocPoint() external view returns (uint256);

  function sushiPerBlock() external view returns (uint256 amount);

  function poolLength() external view returns (uint256);

  function poolInfo(uint256 pid) external view returns (PoolInfo memory);

  function userInfo(uint256 _pid, address _user) external view returns (UserInfo memory);

  function pendingSushi(uint256 _pid, address _user) external view returns (uint256 pending);

  function deposit(
    uint256 pid,
    uint256 amount,
    address to
  ) external;

  function withdraw(
    uint256 pid,
    uint256 amount,
    address to
  ) external;

  function harvest(uint256 pid, address to) external;

  function withdrawAndHarvest(
    uint256 pid,
    uint256 amount,
    address to
  ) external;

  function emergencyWithdraw(uint256 pid, address to) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.12;

interface IRewarder {
  function onSushiReward(
    uint256 pid,
    address user,
    address recipient,
    uint256 sushiAmount,
    uint256 newLpAmount
  ) external;

  function pendingTokens(
    uint256 pid,
    address user,
    uint256 sushiAmount
  ) external view returns (address[] memory, uint256[] memory);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.5.0;

interface IUniswapV2Factory {
  event PairCreated(address indexed token0, address indexed token1, address pair, uint256);

  function feeTo() external view returns (address);

  function feeToSetter() external view returns (address);

  function getPair(address tokenA, address tokenB) external view returns (address pair);

  function allPairs(uint256) external view returns (address pair);

  function allPairsLength() external view returns (uint256);

  function createPair(address tokenA, address tokenB) external returns (address pair);

  function setFeeTo(address) external;

  function setFeeToSetter(address) external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.5.0;

interface IUniswapV2Pair {
  event Approval(address indexed owner, address indexed spender, uint256 value);
  event Transfer(address indexed from, address indexed to, uint256 value);

  function name() external pure returns (string memory);

  function symbol() external pure returns (string memory);

  function decimals() external pure returns (uint8);

  function totalSupply() external view returns (uint256);

  function balanceOf(address owner) external view returns (uint256);

  function allowance(address owner, address spender) external view returns (uint256);

  function approve(address spender, uint256 value) external returns (bool);

  function transfer(address to, uint256 value) external returns (bool);

  function transferFrom(
    address from,
    address to,
    uint256 value
  ) external returns (bool);

  function DOMAIN_SEPARATOR() external view returns (bytes32);

  function PERMIT_TYPEHASH() external pure returns (bytes32);

  function nonces(address owner) external view returns (uint256);

  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  event Mint(address indexed sender, uint256 amount0, uint256 amount1);
  event Burn(address indexed sender, uint256 amount0, uint256 amount1, address indexed to);
  event Swap(
    address indexed sender,
    uint256 amount0In,
    uint256 amount1In,
    uint256 amount0Out,
    uint256 amount1Out,
    address indexed to
  );
  event Sync(uint112 reserve0, uint112 reserve1);

  function MINIMUM_LIQUIDITY() external pure returns (uint256);

  function factory() external view returns (address);

  function token0() external view returns (address);

  function token1() external view returns (address);

  function getReserves()
    external
    view
    returns (
      uint112 reserve0,
      uint112 reserve1,
      uint32 blockTimestampLast
    );

  function price0CumulativeLast() external view returns (uint256);

  function price1CumulativeLast() external view returns (uint256);

  function kLast() external view returns (uint256);

  function mint(address to) external returns (uint256 liquidity);

  function burn(address to) external returns (uint256 amount0, uint256 amount1);

  function swap(
    uint256 amount0Out,
    uint256 amount1Out,
    address to,
    bytes calldata data
  ) external;

  function skim(address to) external;

  function sync() external;

  function initialize(address, address) external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
  function factory() external pure returns (address);

  function WETH() external pure returns (address);

  function addLiquidity(
    address tokenA,
    address tokenB,
    uint256 amountADesired,
    uint256 amountBDesired,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  )
    external
    returns (
      uint256 amountA,
      uint256 amountB,
      uint256 liquidity
    );

  function addLiquidityETH(
    address token,
    uint256 amountTokenDesired,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  )
    external
    payable
    returns (
      uint256 amountToken,
      uint256 amountETH,
      uint256 liquidity
    );

  function removeLiquidity(
    address tokenA,
    address tokenB,
    uint256 liquidity,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountA, uint256 amountB);

  function removeLiquidityETH(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountToken, uint256 amountETH);

  function removeLiquidityWithPermit(
    address tokenA,
    address tokenB,
    uint256 liquidity,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline,
    bool approveMax,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external returns (uint256 amountA, uint256 amountB);

  function removeLiquidityETHWithPermit(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline,
    bool approveMax,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external returns (uint256 amountToken, uint256 amountETH);

  function swapExactTokensForTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapTokensForExactTokens(
    uint256 amountOut,
    uint256 amountInMax,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapExactETHForTokens(
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable returns (uint256[] memory amounts);

  function swapTokensForExactETH(
    uint256 amountOut,
    uint256 amountInMax,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapExactTokensForETH(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapETHForExactTokens(
    uint256 amountOut,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable returns (uint256[] memory amounts);

  function quote(
    uint256 amountA,
    uint256 reserveA,
    uint256 reserveB
  ) external pure returns (uint256 amountB);

  function getAmountOut(
    uint256 amountIn,
    uint256 reserveIn,
    uint256 reserveOut
  ) external pure returns (uint256 amountOut);

  function getAmountIn(
    uint256 amountOut,
    uint256 reserveIn,
    uint256 reserveOut
  ) external pure returns (uint256 amountIn);

  function getAmountsOut(uint256 amountIn, address[] calldata path) external view returns (uint256[] memory amounts);

  function getAmountsIn(uint256 amountOut, address[] calldata path) external view returns (uint256[] memory amounts);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.2;

import "./IUniswapV2Router01.sol";

interface IUniswapV2Router02 is IUniswapV2Router01 {
  function removeLiquidityETHSupportingFeeOnTransferTokens(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountETH);

  function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
    address token,
    uint256 liquidity,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline,
    bool approveMax,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external returns (uint256 amountETH);

  function swapExactTokensForTokensSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;

  function swapExactETHForTokensSupportingFeeOnTransferTokens(
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable;

  function swapExactTokensForETHSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.17;

import {ERC20, IERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {ERC4626, IERC4626} from "@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol";
import {IUniswapV2Router02} from "../../../interfaces/IUniswapV2Router02.sol";
import {IUniswapV2Factory} from "../../../interfaces/IUniswapV2Factory.sol";
import {IUniswapV2Pair} from "../../../interfaces/IUniswapV2Pair.sol";
import {IMasterChefV2} from "../../../interfaces/IMasterChefV2.sol";

interface ISushiStakingVault {
    function initialize(
        ERC20 tokenA_, 
        ERC20 tokenB_, 
        IUniswapV2Router02 router_,
        IUniswapV2Factory factory_,
        IUniswapV2Pair pair_,
        IMasterChefV2 farm_,
        uint256 poolId_,
        address deployer
    ) external;

    /// -----------------------------------------------------------------------
    /// SushiSwap handling functions
    /// -----------------------------------------------------------------------

    function getAccruedRewards(bool includeDust) external view returns (address[] memory, uint256[] memory);

    /// -----------------------------------------------------------------------
    /// Public variables setters
    /// -----------------------------------------------------------------------

    /// @notice Sets path to swap from tokenA to tokenB
    function setPath(address[] memory newPath) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.17;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {ERC4626} from "@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {IUniswapV2Router02} from "../../../interfaces/IUniswapV2Router02.sol";
import {IUniswapV2Factory} from "../../../interfaces/IUniswapV2Factory.sol";
import {IUniswapV2Pair} from "../../../interfaces/IUniswapV2Pair.sol";
import {IMasterChefV2} from "../../../interfaces/IMasterChefV2.sol";
import {IRewarder} from "../../../interfaces/IRewarder.sol";

/// @title SushiStakingVault
/// @author ffarall, LucaCevasco
/// @notice Automated SushiSwap liquidity provider and staker with ERC4626 interface
/// @dev Adds liquidity to a SushiSwap pool and stakes the LP tokens on the MasterChef
/// contract to earn rewards. Uses LPTs as shares accounting instead of using regular
/// vault accounting.
library SushiStakingLogic {
    using SafeERC20 for ERC20;
    using Math for uint256;

    /// -----------------------------------------------------------------------
    /// SushiSwap handling functions
    /// -----------------------------------------------------------------------

    function getAccruedRewards(
        bool includeDust,
        IMasterChefV2 farm,
        uint256 poolId
    ) public view returns (address[] memory, uint256[] memory) {
        address sushi = farm.SUSHI();
        IRewarder poolRewarder = farm.rewarder(poolId);

        uint256 pendingSushi = farm.pendingSushi(poolId, address(this));

        address[] memory extraRewards;
        uint256[] memory extraAmounts;
        (extraRewards, extraAmounts) = poolRewarder.pendingTokens(poolId, address(this), pendingSushi);

        address[] memory rewards = new address[](extraRewards.length + 1);
        uint256[] memory amounts = new uint256[](extraAmounts.length + 1);

        rewards[0] = sushi;
        amounts[0] = pendingSushi;

        for (uint256 i = 0; i < extraRewards.length; i++) {
            rewards[i + 1] = extraRewards[i];
            amounts[i + 1] = extraAmounts[i];
        }

        if (includeDust) {
            for (uint256 i = 0; i < rewards.length; i++) {
                ERC20 rewardToken = ERC20(rewards[i]);
                amounts[i] += (rewardToken.balanceOf(address(this)));
            }
        }

        return (rewards, amounts);
    }
    
    function addLiquidity(
        uint256 amountA, 
        uint256 amountB,
        ERC20 tokenA,
        ERC20 tokenB,
        IUniswapV2Router02 router
    )
        external
        returns (
        uint256,
        uint256,
        uint256
        )
    {
        uint256 deadline = block.timestamp + 300;
        uint256 minAmountA = (amountA * 95) / 100;
        uint256 minAmountB = (amountB * 95) / 100;

        return
        IUniswapV2Router02(router).addLiquidity(
            address(tokenA),
            address(tokenB),
            amountA,
            amountB,
            minAmountA,
            minAmountB,
            address(this),
            deadline
        );
    }

    function removeLiquidity(
        uint256 lptAmount,
        ERC20 tokenA,
        ERC20 tokenB,
        IUniswapV2Router02 router,
        IUniswapV2Pair pair
    ) external returns (uint256, uint256) {
        // Getting reserves of tokenA in Uniswap Pair
        uint256 reserveA; uint256 reserveB;
        uint256 minAmountA; uint256 minAmountB;

        { // This makes reserve0, reserve1, token0 and token1 local variables of
          // this scope, and prevents form stack too deep compilation error.
            {
                uint256 reserve0; uint256 reserve1;
                (reserve0, reserve1, ) = pair.getReserves();
                address token0 = pair.token0();
                address token1 = pair.token1();

                if (address(tokenA) == token0) {
                    reserveA = reserve0;
                    reserveB = reserve1;
                } else if (address(tokenA) == token1) {
                    reserveA = reserve1;
                    reserveB = reserve0;
                }
            }

            // Getting total supply of LPTs in Uniswap Pair
            uint256 lptSupply = pair.totalSupply();

            // Calculate minAmountA and minAmountB considering 5% slippage
            minAmountA = lptAmount.mulDiv(reserveA, lptSupply) * 95 / 100;
            minAmountB = lptAmount.mulDiv(reserveB, lptSupply) * 95 / 100;
        }

        uint256 deadline = block.timestamp + 300;
        return
        IUniswapV2Router02(router).removeLiquidity(
            address(tokenA),
            address(tokenB),
            lptAmount,
            minAmountA,
            minAmountB,
            address(this),
            deadline
        );
    }

    function stake(
        uint256 lptAmount,
        IUniswapV2Pair pair,
        IMasterChefV2 farm,
        uint256 poolId
    ) external {
        // Setting approval of LPTs to MasterChef contract
        pair.approve(address(farm), lptAmount);

        // Staking
        farm.deposit(poolId, lptAmount, address(this));
    }

    function unstake(
        uint256 lptAmount,
        IMasterChefV2 farm,
        uint256 poolId
    ) external {
        // Withdraw user's shares (i.e. LPTs)
        farm.withdraw(poolId, lptAmount, address(this));
    }

    function swap(
        uint256 amountIn,
        address[] memory path,
        IUniswapV2Router02 router
    ) public returns (uint256) {
        // Getting quote for swap, considering 1% slippage
        uint256[] memory amountsOutQuote = router.getAmountsOut(amountIn, path);
        uint256 minAmountOut = amountsOutQuote[amountsOutQuote.length - 1] * 990 / 1000;
        
        // Swapping
        uint256[] memory amountsOut = router.swapExactTokensForTokens(
            amountIn,
            minAmountOut,
            path,
            address(this),
            block.timestamp + 300
        );
        uint256 amountOut = amountsOut[amountsOut.length - 1];

        return amountOut;
    }

    function claimRewards(
        ERC20 tokenA,
        IUniswapV2Router02 router,
        IMasterChefV2 farm,
        uint256 poolId
    ) public returns (address[] memory, uint256[] memory) {
        address[] memory rewards;
        uint256[] memory amounts;
        (rewards, amounts) = getAccruedRewards(false, farm, poolId);

        // Get rewards
        farm.harvest(poolId, address(this));

        // Swap rewards for Vault asset
        for (uint256 i=0; i < rewards.length; i++) {
            address[] memory path = new address[](2);
            path[0] = rewards[i];
            path[1] = address(tokenA);

            ERC20(rewards[i]).approve(address(router), amounts[i]);
            swap(amounts[i], path, router);
        }

        return (rewards, amounts);
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.17;

import {ERC20, IERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {ERC4626} from "@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {Initializable} from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import {IUniswapV2Router02} from "../../../interfaces/IUniswapV2Router02.sol";
import {IUniswapV2Factory} from "../../../interfaces/IUniswapV2Factory.sol";
import {IUniswapV2Pair} from "../../../interfaces/IUniswapV2Pair.sol";
import {IMasterChefV2} from "../../../interfaces/IMasterChefV2.sol";
import {IRewarder} from "../../../interfaces/IRewarder.sol";
import {SushiStakingLogic} from "./SushiStakingLogic.sol";
import {ISushiStakingVault} from "./ISushiStakingVault.sol";

/// @title SushiStakingVault
/// @author ffarall, LucaCevasco
/// @notice Automated SushiSwap liquidity provider and staker with ERC4626 interface
/// @dev Adds liquidity to a SushiSwap pool and stakes the LP tokens on the MasterChef
/// contract to earn rewards. Uses LPTs as shares accounting instead of using regular
/// vault accounting.
contract SushiStakingVault is Ownable, Initializable, ERC4626, ISushiStakingVault {
    using SafeERC20 for ERC20;
    using Math for uint256;

    /// -----------------------------------------------------------------------
    /// Immutable params
    /// -----------------------------------------------------------------------

    /// @notice One of the tokens of the pool, is the same as the asset of the vault
    ERC20 public tokenA;
    /// @notice The other token of the pool
    ERC20 public tokenB;
    /// @notice The UniswapV2 router2 address
    IUniswapV2Router02 public router;
    /// @notice UniswapV2 Factory
    IUniswapV2Factory public factory;
    /// @notice UniswapV2 pair of tokenA and tokenB
    IUniswapV2Pair public pair;
    /// @notice Path to swap tokens form tokenA to tokenB
    address[] public pathAtoB;
    /// @notice MasterChefV2/MiniChef SushiSwap contract to stake LPTs
    IMasterChefV2 public farm;
    /// @notice MasterChef's pool ID to invest in
    uint256 public poolId;

    /// -----------------------------------------------------------------------
    /// Private vars
    /// -----------------------------------------------------------------------

    /// @notice Amount of LPTs deposited in this vault
    uint256 private _lptsDeposited;

    /// -----------------------------------------------------------------------
    /// Constructor
    /// -----------------------------------------------------------------------

    constructor()
    ERC4626(IERC20(address(0)))
    ERC20("SushiStakingVault", "SSV") { }

    /// -----------------------------------------------------------------------
    /// Initalizable
    /// -----------------------------------------------------------------------

    function initialize(
        ERC20 tokenA_, 
        ERC20 tokenB_, 
        IUniswapV2Router02 router_,
        IUniswapV2Factory factory_,
        IUniswapV2Pair pair_,
        IMasterChefV2 farm_,
        uint256 poolId_,
        address deployer
    ) external initializer {
        _transferOwnership(deployer);

        tokenA = tokenA_;
        tokenB = tokenB_;
        router = router_;
        factory = factory_;
        pair = pair_;
        farm = farm_;
        poolId = poolId_;

        // Setting path to swap, using simplest option as default
        pathAtoB.push(address(tokenA));
        pathAtoB.push(address(tokenB));

        // Pre-authorising smart contracts to use this vault's tokens
        tokenA.approve(address(router), 2**256 - 1);
        tokenB.approve(address(router), 2**256 - 1);
        pair.approve(address(farm), 2**256 - 1);
        pair.approve(address(router), 2**256 - 1);
    }

    /// -----------------------------------------------------------------------
    /// ERC4626 overrides
    /// -----------------------------------------------------------------------

    /// @inheritdoc ERC4626
    function asset() public view virtual override returns (address) {
        return address(tokenA);
    }

    /// @inheritdoc ERC4626
    function deposit(uint256 assets, address receiver) public virtual override returns (uint256) {
        require(assets <= maxDeposit(receiver), "ERC4626: deposit more than max");

        uint256 shares;
        (shares, ) = _depositAssets(_msgSender(), receiver, assets);

        return shares;
    }

    /// @inheritdoc ERC4626
    function mint(uint256 shares, address receiver) public virtual override returns (uint256) {
        require(shares <= maxMint(receiver), "ERC4626: mint more than max");

        uint256 assets = previewMint(shares);
        (, assets) = _depositAssets(_msgSender(), receiver, assets);

        return assets;
    }

    /// @inheritdoc ERC4626
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) public virtual override returns (uint256) {
        require(assets <= maxWithdraw(owner), "ERC4626: withdraw more than max");

        uint256 shares = previewWithdraw(assets);
        (, shares) = _withdrawLPTs(_msgSender(), receiver, owner, shares);

        return shares;
    }

    /// @inheritdoc ERC4626
    function totalAssets() public view virtual override returns (uint256) {
        return _convertToAssets(_lptsDeposited, Math.Rounding.Down);
    }

    /// @inheritdoc ERC4626
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) public virtual override returns (uint256) {
        require(shares <= maxRedeem(owner), "ERC4626: redeem more than max");

        uint256 assets = previewRedeem(shares);
        (assets, ) = _withdrawLPTs(_msgSender(), receiver, owner, shares);

        return assets;
    }

    /// @inheritdoc ERC4626
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual override returns (uint256) {
        // Getting reserves of tokenA in Uniswap Pair
        uint256 reserve0; uint256 reserve1; uint256 reserveA;
        (reserve0, reserve1, ) = pair.getReserves();
        address token0 = pair.token0();
        address token1 = pair.token1();

        if (address(tokenA) == token0) {
            reserveA = reserve0;
        } else if (address(tokenA) == token1) {
            reserveA = reserve1;
        } else {
            return _initialConvertToShares(assets, rounding);
        }

        // Getting total supply of LPTs in Uniswap Pair
        uint256 lptSupply = pair.totalSupply();

        return (assets / 2).mulDiv(lptSupply, reserveA, rounding);
    }

    /// @inheritdoc ERC4626
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual override returns (uint256) {
        // Getting reserves of tokenA in Uniswap Pair
        uint256 reserve0; uint256 reserve1; uint256 reserveA;
        (reserve0, reserve1, ) = pair.getReserves();
        address token0 = pair.token0();
        address token1 = pair.token1();

        if (address(tokenA) == token0) {
            reserveA = reserve0;
        } else if (address(tokenA) == token1) {
            reserveA = reserve1;
        } else {
            return _initialConvertToAssets(shares, rounding);
        }

        // Getting total supply of LPTs in Uniswap Pair
        uint256 lptSupply = pair.totalSupply();

        return shares.mulDiv(reserveA, lptSupply, rounding) * 2;
    }

    /// @dev Deposit/mint common workflow.
    function _depositAssets(
        address caller,
        address receiver,
        uint256 assets
    ) internal returns (uint256, uint256) {
        // If _asset is ERC777, `transferFrom` can trigger a reenterancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(ERC20(asset()), caller, address(this), assets);

        uint256 lptAmount = _addLiquidityAndStake(assets);
        _mint(receiver, lptAmount);
        emit Deposit(caller, receiver, assets, lptAmount);

        return (assets, lptAmount);
    }

    /// @dev Withdraw/redeem common workflow.
    function _withdrawLPTs(
        address caller,
        address receiver,
        address owner,
        uint256 shares
    ) internal virtual returns (uint256, uint256) {
        // If _asset is ERC777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _unstake(owner, shares);
        _burn(owner, shares);

        _removeLiquidity(shares);
        uint256 amountToWithdraw = ERC20(asset()).balanceOf(address(this));
        SafeERC20.safeTransfer(ERC20(asset()), receiver, amountToWithdraw);

        emit Withdraw(caller, receiver, owner, amountToWithdraw, shares);

        return (amountToWithdraw, shares);
    }

    /// -----------------------------------------------------------------------
    /// SushiSwap handling functions
    /// -----------------------------------------------------------------------

    /// @notice Gets amount of rewards pending in the MasterChef contract.
    /// @dev Considers both SUSHI and additional rewards of the pool, as part of the Onsen program.
    /// @param includeDust If the calculation should include fractions of the tokens remaining in
    /// this contract.
    function getAccruedRewards(bool includeDust) public view returns (address[] memory, uint256[] memory) {
        return SushiStakingLogic.getAccruedRewards(includeDust, farm, poolId);
    }
    
    /// @notice This contract must be previously funded with the required amounts.
    /// `amountA` and `amountB` must be accordingly balanced given the current pool price.
    /// min amounts are internally computed.
    /// a 300s deadline is internally specified.
    /// @dev Adds liquidity to a liquidity pool given by `tokenA` and `tokenB` via `router`.
    /// @param amountA the amount of `tokenA` to be deposited.
    /// @param amountB the amount of `tokenB` to be deposited.
    function _addLiquidity(uint256 amountA, uint256 amountB)
        internal
        returns (
        uint256,
        uint256,
        uint256
        )
    {
        return SushiStakingLogic.addLiquidity(amountA, amountB, tokenA, tokenB, router);
    }
    
    /// @notice This contract must be previously funded with the required amounts.
    /// `amountA` and `amountB` must be accordingly balanced given the current pool price.
    /// min amounts are internally computed.
    /// a 300s deadline is internally specified.
    /// @dev Adds liquidity to a liquidity pool given by `tokenA` and `tokenB` via `router`.
    /// @param assets the amount of `tokenA` to be deposited.
    function _addLiquidityAndStake(
        uint256 assets
    ) internal returns (uint256)
    {
        // Swap half the assets to tokenB, to invest in pool
        uint256 amountA = assets / 2;
        uint256 lptAmount;
        if (amountA != 0) {
            uint256 amountB = SushiStakingLogic.swap(amountA, pathAtoB, router);

            // Add liquidity with both assets
            (, , lptAmount) = _addLiquidity(amountA, amountB);

            // Invest in SushiSwap farm
            _stake(lptAmount);

            _lptsDeposited += lptAmount;
        }

        return lptAmount;
    }

    /// @notice Removes liquidity from a liquidity pool given by `tokenA` and `tokenB` via `router`,
    /// back to this contract.
    /// @dev A 300s deadline is internally specified and a slippage of 5% is tolerated.
    /// @param lptAmount the amount of liquidity provider tokens to burn.
    function _removeLiquidity(
        uint256 lptAmount
    ) internal returns (uint256) {
        uint256 amountA; uint256 amountB;
        (amountA, amountB) = SushiStakingLogic.removeLiquidity(lptAmount, tokenA, tokenB, router, pair);

        address[] memory path = new address[](2);
        path[0] = address(tokenB);
        path[1] = address(tokenA);
        uint256 swappedAmountA = SushiStakingLogic.swap(amountB, path, router);

        return amountA + swappedAmountA;
    }

    /// @notice Stakes LPTs to MasterChef contract to earn rewards.
    /// @dev Approves usage of LPTs first.
    /// @param lptAmount the amount of liquidity provider tokens to burn.
    function _stake(uint256 lptAmount) internal {
        SushiStakingLogic.stake(lptAmount, pair, farm, poolId);
    }

    /// @notice Claims rewards and unstakes LPTs from MasterChef contract.
    /// @param owner of the LPTs.
    /// @param lptAmount the amount of liquidity provider tokens to burn.
    function _unstake(
        address owner,
        uint256 lptAmount
    ) internal {
        // Claim rewards and swap them for base asset
        SushiStakingLogic.claimRewards(tokenA, router, farm, poolId);

        // Reinvest share that doesn't belong to user withdrawing
        uint256 assetsClaimed = ERC20(asset()).balanceOf(address(this));
        uint256 amountToReinvest = assetsClaimed * (totalSupply() - balanceOf(owner)) / totalSupply();
        _addLiquidityAndStake(amountToReinvest);
        
        // Unstake user's shares (i.e. LPTs)
        SushiStakingLogic.unstake(lptAmount, farm, poolId);
    }

    /// -----------------------------------------------------------------------
    /// Public variables setters
    /// -----------------------------------------------------------------------

    /// @notice Sets path to swap from tokenA to tokenB
    function setPath(address[] memory newPath) external onlyOwner {
        delete pathAtoB;
        pathAtoB = newPath;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200,
    "details": {
      "yul": true
    }
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {
    "contracts/layer-1-vaults/staking/sushi/SushiStakingLogic.sol": {
      "SushiStakingLogic": "0x47727894a06c009ca106dce208f9889bb8d45593"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"asset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"convertToShares","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"factory","outputs":[{"internalType":"contract IUniswapV2Factory","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"farm","outputs":[{"internalType":"contract IMasterChefV2","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bool","name":"includeDust","type":"bool"}],"name":"getAccruedRewards","outputs":[{"internalType":"address[]","name":"","type":"address[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"tokenA_","type":"address"},{"internalType":"contract ERC20","name":"tokenB_","type":"address"},{"internalType":"contract IUniswapV2Router02","name":"router_","type":"address"},{"internalType":"contract IUniswapV2Factory","name":"factory_","type":"address"},{"internalType":"contract IUniswapV2Pair","name":"pair_","type":"address"},{"internalType":"contract IMasterChefV2","name":"farm_","type":"address"},{"internalType":"uint256","name":"poolId_","type":"uint256"},{"internalType":"address","name":"deployer","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"mint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pair","outputs":[{"internalType":"contract IUniswapV2Pair","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"pathAtoB","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"contract IUniswapV2Router02","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"newPath","type":"address[]"}],"name":"setPath","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenA","outputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenB","outputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"}]

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