Token TETU Reward Token

// SPDX-License-Identifier: ISC
/**
* By using this software, you understand, acknowledge and accept that Tetu
* and/or the underlying software are provided “as is” and “as available”
* basis and without warranties or representations of any kind either expressed
* or implied. Any use of this open source software released under the ISC
* Internet Systems Consortium license is done at your own risk to the fullest
* extent permissible pursuant to applicable law any and all liability as well
* as all warranties, including any fitness for a particular purpose with respect
* to Tetu and/or the underlying software and the use thereof are disclaimed.
*/

pragma solidity 0.8.4;

import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Capped.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";

/// @title TETU token contract. Has strict weekly emission algorithm
/// @dev Use with TetuProxy
/// @author belbix
contract RewardToken is ERC20Burnable, ERC20Capped {
  using SafeMath for uint256;

  uint256 internal constant SCALE = 1e18;
  uint256 internal constant HALF_SCALE = 5e17;
  /// @notice Immutable owner of the contract
  address public immutable owner;

  /// @notice Maximum total supply -  1 billion
  uint256 public constant HARD_CAP = 1 * (10 ** 9) * SCALE;
  /// @notice Vesting period - 4 years
  uint256 public constant MINTING_PERIOD = 126227808;

  /// @notice Start date of minting
  uint256 public mintingStartTs;
  /// @notice End date of minting
  uint256 public mintingEndTs;

  /// @notice Contract constructor
  /// @param _owner Owner address, MintHelper by default
  constructor(address _owner)
  ERC20("TETU Reward Token", "TETU")
  ERC20Capped(HARD_CAP) {
    require(_owner != address(0), "zero address");
    owner = _owner;
  }

  /// @dev Strict access only for owner
  modifier onlyOwner() {
    require(msg.sender == owner, "not owner");
    _;
  }

  /// @notice Strat vesting period
  function startMinting() external onlyOwner {
    require(mintingStartTs == 0, "minting already started");
    mintingStartTs = block.timestamp;
    mintingEndTs = mintingStartTs.add(MINTING_PERIOD);
  }

  /// @notice Mint given amount for given address
  /// @param to Mint destination
  /// @param amount Amount of mint
  function mint(address to, uint256 amount) external onlyOwner {
    _mint(to, amount);
  }

  /// @dev Override function ERC20 implementation
  function _mint(address account, uint256 amount) internal override(ERC20, ERC20Capped) {
    super._mint(account, amount);
  }

  /// @dev This function will check each transfer and if it is a mint
  ///      will check that totalSupply will be not higher than maxTotalSupplyForCurrentBlock
  function _beforeTokenTransfer(address from, address to, uint256 amount) internal override {
    if (from == address(0)) {// it is mint
      require(mintingStartTs != 0, "minting not started");
      require(totalSupply().add(amount) <= maxTotalSupplyForCurrentBlock(), "limit exceeded");
    }
    super._beforeTokenTransfer(from, to, amount);
  }

  /// @notice Return quantity of weeks since minting started
  /// @return Quantity of weeks
  function currentWeek() public view returns (uint256){
    if (mintingStartTs == 0) {// not started yet
      return 0;
    }
    return block.timestamp.sub(mintingStartTs).div(1 weeks).add(1);
  }

  /// @notice Return maximum Total Supply for the current week.
  ///         The contract can't mint more than this value
  /// @return Maximum allowed supply
  function maxTotalSupplyForCurrentBlock() public view returns (uint256){
    uint256 allWeeks = MINTING_PERIOD / 1 weeks;

    uint256 week = Math.min(allWeeks, currentWeek());

    if (week == 0) {
      return 0;
    }
    if (week >= MINTING_PERIOD / 1 weeks) {
      return HARD_CAP;
    }

    uint256 finalMultiplier = _log2(allWeeks.add(1).mul(SCALE));

    uint256 baseWeekEmission = HARD_CAP / finalMultiplier;

    uint256 multiplier = _log2(week.add(1).mul(SCALE));

    uint256 maxTotalSupply = baseWeekEmission.mul(multiplier);

    return Math.min(maxTotalSupply, HARD_CAP);
  }

  /*********************************************
  *              PRB-MATH                      *
  *   https://github.com/hifi-finance/prb-math *
  **********************************************/

  /// @notice Calculates the binary logarithm of x.
  ///
  /// @dev Based on the iterative approximation algorithm.
  /// https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
  ///
  /// Requirements:
  /// - x must be greater than or equal to SCALE, otherwise the result would be negative.
  ///
  /// Caveats:
  /// - The results are nor perfectly accurate to the last decimal,
  ///   due to the lossy precision of the iterative approximation.
  ///
  /// @param x The unsigned 60.18-decimal fixed-point number for which
  ///           to calculate the binary logarithm.
  /// @return result The binary logarithm as an unsigned 60.18-decimal fixed-point number.
  function _log2(uint256 x) public pure returns (uint256 result) {
    require(x >= SCALE, "log input should be greater 1e18");

    // Calculate the integer part of the logarithm
    // and add it to the result and finally calculate y = x * 2^(-n).
    uint256 n = mostSignificantBit(x / SCALE);

    // The integer part of the logarithm as an unsigned 60.18-decimal fixed-point number.
    // The operation can't overflow because n is maximum 255 and SCALE is 1e18.
    uint256 rValue = n * SCALE;

    // This is y = x * 2^(-n).
    uint256 y = x >> n;

    // If y = 1, the fractional part is zero.
    if (y == SCALE) {
      return rValue;
    }

    // Calculate the fractional part via the iterative approximation.
    // The "delta >>= 1" part is equivalent to "delta /= 2", but shifting bits is faster.
    for (uint256 delta = HALF_SCALE; delta > 0; delta >>= 1) {
      y = (y * y) / SCALE;

      // Is y^2 > 2 and so in the range [2,4)?
      if (y >= 2 * SCALE) {
        // Add the 2^(-m) factor to the logarithm.
        rValue += delta;

        // Corresponds to z/2 on Wikipedia.
        y >>= 1;
      }
    }
    return rValue;
  }

  /// @notice Finds the zero-based index of the first one in the binary representation of x.
  /// @dev See the note on msb in the "Find First Set"
  ///      Wikipedia article https://en.wikipedia.org/wiki/Find_first_set
  /// @param x The uint256 number for which to find the index of the most significant bit.
  /// @return msb The index of the most significant bit as an uint256.
  //noinspection NoReturn
  function mostSignificantBit(uint256 x) internal pure returns (uint256 msb) {
    if (x >= 2 ** 128) {
      x >>= 128;
      msb += 128;
    }
    if (x >= 2 ** 64) {
      x >>= 64;
      msb += 64;
    }
    if (x >= 2 ** 32) {
      x >>= 32;
      msb += 32;
    }
    if (x >= 2 ** 16) {
      x >>= 16;
      msb += 16;
    }
    if (x >= 2 ** 8) {
      x >>= 8;
      msb += 8;
    }
    if (x >= 2 ** 4) {
      x >>= 4;
      msb += 4;
    }
    if (x >= 2 ** 2) {
      x >>= 2;
      msb += 2;
    }
    if (x >= 2 ** 1) {
      // No need to shift x any more.
      msb += 1;
    }
  }

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC20.sol";

/**
 * @dev Extension of {ERC20} that adds a cap to the supply of tokens.
 */
abstract contract ERC20Capped is ERC20 {
    uint256 private immutable _cap;

    /**
     * @dev Sets the value of the `cap`. This value is immutable, it can only be
     * set once during construction.
     */
    constructor(uint256 cap_) {
        require(cap_ > 0, "ERC20Capped: cap is 0");
        _cap = cap_;
    }

    /**
     * @dev Returns the cap on the token's total supply.
     */
    function cap() public view virtual returns (uint256) {
        return _cap;
    }

    /**
     * @dev See {ERC20-_mint}.
     */
    function _mint(address account, uint256 amount) internal virtual override {
        require(ERC20.totalSupply() + amount <= cap(), "ERC20Capped: cap exceeded");
        super._mint(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 currentAllowance = allowance(account, _msgSender());
        require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
        unchecked {
            _approve(account, _msgSender(), currentAllowance - amount);
        }
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute.
        return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"HARD_CAP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTING_PERIOD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"}],"name":"_log2","outputs":[{"internalType":"uint256","name":"result","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"cap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"currentWeek","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"maxTotalSupplyForCurrentBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"mintingEndTs","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mintingStartTs","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startMinting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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

00000000000000000000000081367059892aa1d8503a79a0af9254dd0a09afbf

-----Decoded View---------------
Arg [0] : _owner (address): 0x81367059892aa1d8503a79a0af9254dd0a09afbf

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 00000000000000000000000081367059892aa1d8503a79a0af9254dd0a09afbf