Token CRETA TOKEN

/**
 *Submitted for verification at Etherscan.io on 2022-06-14
*/

// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/math/SafeMath.sol


// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

contract Lockable is Ownable {
    mapping(address => bool) lockedlist;

    event Lock(address indexed from);
    event Unlock(address indexed from);

    function Locked(address from) public view virtual returns (bool) {
        return lockedlist[from];
    }

    function _locked(address from) internal view virtual {
        require(!lockedlist[from], "Lock: Account is locked");
    }
    
    function lock(address from) public onlyOwner {
        lockedlist[from] = true;
        
        emit Lock(from);
    }

    function unlock(address from) public onlyOwner {
        lockedlist[from] = false;
        
        emit Unlock(from);
    }
}

// File: contracts/creta.sol

pragma solidity ^0.8.0;

contract ERC20Base is Context, ERC20, Ownable, Lockable {
    constructor(string memory name_, string memory symbol_) ERC20(name_, symbol_){}

    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _locked(owner);
        _transfer(owner, to, amount);
        return true;
    }
    
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _locked(from);
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    function mint(address account, uint256 amount) internal virtual onlyOwner {
        _mint(account, amount);
    }
}

contract Create_Token is ERC20Base {
    constructor() ERC20Base("CRETA TOKEN", "CRETA") {
        mint(msg.sender, 100*(10**8)*(10**uint256(decimals())));
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"}],"name":"Lock","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"}],"name":"Unlock","type":"event"},{"inputs":[{"internalType":"address","name":"from","type":"address"}],"name":"Locked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"}],"name":"lock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"}],"name":"unlock","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

41116:167:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28753:100;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;31104:201;;;;;;:::i;:::-;;:::i;:::-;;;1613:14:1;;1606:22;1588:41;;1576:2;1561:18;31104:201:0;1448:187:1;29873:108:0;29961:12;;29873:108;;;6297:25:1;;;6285:2;6270:18;29873:108:0;6151:177:1;40667:319:0;;;;;;:::i;:::-;;:::i;40093:128::-;;;;;;:::i;:::-;;:::i;:::-;;29715:93;;;29798:2;6475:36:1;;6463:2;6448:18;29715:93:0;6333:184:1;32589:238:0;;;;;;:::i;:::-;;:::i;39710:107::-;;;;;;:::i;:::-;-1:-1:-1;;;;;39793:16:0;39769:4;39793:16;;;:10;:16;;;;;;;;;39710:107;30044:127;;;;;;:::i;:::-;-1:-1:-1;;;;;30145:18:0;30118:7;30145:18;;;;;;;;;;;;30044:127;18183:103;;;:::i;17532:87::-;17605:6;;17532:87;;-1:-1:-1;;;;;17605:6:0;;;1386:51:1;;1374:2;1359:18;17532:87:0;1240:203:1;28972:104:0;;;:::i;33330:436::-;;;;;;:::i;:::-;;:::i;40437:218::-;;;;;;:::i;:::-;;:::i;30633:151::-;;;;;;:::i;:::-;;:::i;18441:201::-;;;;;;:::i;:::-;;:::i;39962:123::-;;;;;;:::i;:::-;;:::i;28753:100::-;28807:13;28840:5;28833:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28753:100;:::o;31104:201::-;31187:4;16336:10;31243:32;16336:10;31259:7;31268:6;31243:8;:32::i;:::-;-1:-1:-1;31293:4:0;;31104:201;-1:-1:-1;;;31104:201:0:o;40667:319::-;40798:4;16336:10;40856:13;40864:4;40856:7;:13::i;:::-;40880:38;40896:4;40902:7;40911:6;40880:15;:38::i;:::-;40929:27;40939:4;40945:2;40949:6;40929:9;:27::i;:::-;-1:-1:-1;40974:4:0;;40667:319;-1:-1:-1;;;;40667:319:0:o;40093:128::-;17605:6;;-1:-1:-1;;;;;17605:6:0;16336:10;17752:23;17744:68;;;;-1:-1:-1;;;17744:68:0;;;;;;;:::i;:::-;;;;;;;;;-1:-1:-1;;;;;40151:16:0;::::1;40170:5;40151:16:::0;;;:10:::1;:16;::::0;;;;;:24;;-1:-1:-1;;40151:24:0::1;::::0;;40201:12;::::1;::::0;40170:5;40201:12:::1;40093:128:::0;:::o;32589:238::-;32677:4;16336:10;32733:64;16336:10;32749:7;32786:10;32758:25;16336:10;32749:7;32758:9;:25::i;:::-;:38;;;;:::i;:::-;32733:8;:64::i;18183:103::-;17605:6;;-1:-1:-1;;;;;17605:6:0;16336:10;17752:23;17744:68;;;;-1:-1:-1;;;17744:68:0;;;;;;;:::i;:::-;18248:30:::1;18275:1;18248:18;:30::i;:::-;18183:103::o:0;28972:104::-;29028:13;29061:7;29054:14;;;;;:::i;33330:436::-;33423:4;16336:10;33423:4;33506:25;16336:10;33523:7;33506:9;:25::i;:::-;33479:52;;33570:15;33550:16;:35;;33542:85;;;;-1:-1:-1;;;33542:85:0;;5947:2:1;33542:85:0;;;5929:21:1;5986:2;5966:18;;;5959:30;6025:34;6005:18;;;5998:62;-1:-1:-1;;;6076:18:1;;;6069:35;6121:19;;33542:85:0;5745:401:1;33542:85:0;33663:60;33672:5;33679:7;33707:15;33688:16;:34;33663:8;:60::i;40437:218::-;40516:4;16336:10;40572:14;16336:10;40572:7;:14::i;:::-;40597:28;40607:5;40614:2;40618:6;40597:9;:28::i;30633:151::-;-1:-1:-1;;;;;30749:18:0;;;30722:7;30749:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;30633:151::o;18441:201::-;17605:6;;-1:-1:-1;;;;;17605:6:0;16336:10;17752:23;17744:68;;;;-1:-1:-1;;;17744:68:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;18530:22:0;::::1;18522:73;;;::::0;-1:-1:-1;;;18522:73:0;;2848:2:1;18522:73:0::1;::::0;::::1;2830:21:1::0;2887:2;2867:18;;;2860:30;2926:34;2906:18;;;2899:62;-1:-1:-1;;;2977:18:1;;;2970:36;3023:19;;18522:73:0::1;2646:402:1::0;18522:73:0::1;18606:28;18625:8;18606:18;:28::i;:::-;18441:201:::0;:::o;39962:123::-;17605:6;;-1:-1:-1;;;;;17605:6:0;16336:10;17752:23;17744:68;;;;-1:-1:-1;;;17744:68:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;40018:16:0;::::1;;::::0;;;:10:::1;:16;::::0;;;;;:23;;-1:-1:-1;;40018:23:0::1;40037:4;40018:23;::::0;;40067:10;::::1;::::0;40018:16;40067:10:::1;39962:123:::0;:::o;36964:380::-;-1:-1:-1;;;;;37100:19:0;;37092:68;;;;-1:-1:-1;;;37092:68:0;;5542:2:1;37092:68:0;;;5524:21:1;5581:2;5561:18;;;5554:30;5620:34;5600:18;;;5593:62;-1:-1:-1;;;5671:18:1;;;5664:34;5715:19;;37092:68:0;5340:400:1;37092:68:0;-1:-1:-1;;;;;37179:21:0;;37171:68;;;;-1:-1:-1;;;37171:68:0;;3255:2:1;37171:68:0;;;3237:21:1;3294:2;3274:18;;;3267:30;3333:34;3313:18;;;3306:62;-1:-1:-1;;;3384:18:1;;;3377:32;3426:19;;37171:68:0;3053:398:1;37171:68:0;-1:-1:-1;;;;;37252:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;37304:32;;6297:25:1;;;37304:32:0;;6270:18:1;37304:32:0;;;;;;;36964:380;;;:::o;39825:125::-;-1:-1:-1;;;;;39898:16:0;;;;;;:10;:16;;;;;;;;39897:17;39889:53;;;;-1:-1:-1;;;39889:53:0;;4784:2:1;39889:53:0;;;4766:21:1;4823:2;4803:18;;;4796:30;4862:25;4842:18;;;4835:53;4905:18;;39889:53:0;4582:347:1;37635:453:0;37770:24;37797:25;37807:5;37814:7;37797:9;:25::i;:::-;37770:52;;-1:-1:-1;;37837:16:0;:37;37833:248;;37919:6;37899:16;:26;;37891:68;;;;-1:-1:-1;;;37891:68:0;;3658:2:1;37891:68:0;;;3640:21:1;3697:2;3677:18;;;3670:30;3736:31;3716:18;;;3709:59;3785:18;;37891:68:0;3456:353:1;37891:68:0;38003:51;38012:5;38019:7;38047:6;38028:16;:25;38003:8;:51::i;:::-;37759:329;37635:453;;;:::o;34245:671::-;-1:-1:-1;;;;;34376:18:0;;34368:68;;;;-1:-1:-1;;;34368:68:0;;5136:2:1;34368:68:0;;;5118:21:1;5175:2;5155:18;;;5148:30;5214:34;5194:18;;;5187:62;-1:-1:-1;;;5265:18:1;;;5258:35;5310:19;;34368:68:0;4934:401:1;34368:68:0;-1:-1:-1;;;;;34455:16:0;;34447:64;;;;-1:-1:-1;;;34447:64:0;;2444:2:1;34447:64:0;;;2426:21:1;2483:2;2463:18;;;2456:30;2522:34;2502:18;;;2495:62;-1:-1:-1;;;2573:18:1;;;2566:33;2616:19;;34447:64:0;2242:399:1;34447:64:0;-1:-1:-1;;;;;34597:15:0;;34575:19;34597:15;;;;;;;;;;;34631:21;;;;34623:72;;;;-1:-1:-1;;;34623:72:0;;4016:2:1;34623:72:0;;;3998:21:1;4055:2;4035:18;;;4028:30;4094:34;4074:18;;;4067:62;-1:-1:-1;;;4145:18:1;;;4138:36;4191:19;;34623:72:0;3814:402:1;34623:72:0;-1:-1:-1;;;;;34731:15:0;;;:9;:15;;;;;;;;;;;34749:20;;;34731:38;;34791:13;;;;;;;;:23;;34763:6;;34731:9;34791:23;;34763:6;;34791:23;:::i;:::-;;;;;;;;34847:2;-1:-1:-1;;;;;34832:26:0;34841:4;-1:-1:-1;;;;;34832:26:0;;34851:6;34832:26;;;;6297:25:1;;6285:2;6270:18;;6151:177;34832:26:0;;;;;;;;34871:37;38688:125;18802:191;18895:6;;;-1:-1:-1;;;;;18912:17:0;;;-1:-1:-1;;;;;;18912:17:0;;;;;;;18945:40;;18895:6;;;18912:17;18895:6;;18945:40;;18876:16;;18945:40;18865:128;18802:191;:::o;14:173:1:-;82:20;;-1:-1:-1;;;;;131:31:1;;121:42;;111:70;;177:1;174;167:12;111:70;14:173;;;:::o;192:186::-;251:6;304:2;292:9;283:7;279:23;275:32;272:52;;;320:1;317;310:12;272:52;343:29;362:9;343:29;:::i;:::-;333:39;192:186;-1:-1:-1;;;192:186:1:o;383:260::-;451:6;459;512:2;500:9;491:7;487:23;483:32;480:52;;;528:1;525;518:12;480:52;551:29;570:9;551:29;:::i;:::-;541:39;;599:38;633:2;622:9;618:18;599:38;:::i;:::-;589:48;;383:260;;;;;:::o;648:328::-;725:6;733;741;794:2;782:9;773:7;769:23;765:32;762:52;;;810:1;807;800:12;762:52;833:29;852:9;833:29;:::i;:::-;823:39;;881:38;915:2;904:9;900:18;881:38;:::i;:::-;871:48;;966:2;955:9;951:18;938:32;928:42;;648:328;;;;;:::o;981:254::-;1049:6;1057;1110:2;1098:9;1089:7;1085:23;1081:32;1078:52;;;1126:1;1123;1116:12;1078:52;1149:29;1168:9;1149:29;:::i;:::-;1139:39;1225:2;1210:18;;;;1197:32;;-1:-1:-1;;;981:254:1:o;1640:597::-;1752:4;1781:2;1810;1799:9;1792:21;1842:6;1836:13;1885:6;1880:2;1869:9;1865:18;1858:34;1910:1;1920:140;1934:6;1931:1;1928:13;1920:140;;;2029:14;;;2025:23;;2019:30;1995:17;;;2014:2;1991:26;1984:66;1949:10;;1920:140;;;2078:6;2075:1;2072:13;2069:91;;;2148:1;2143:2;2134:6;2123:9;2119:22;2115:31;2108:42;2069:91;-1:-1:-1;2221:2:1;2200:15;-1:-1:-1;;2196:29:1;2181:45;;;;2228:2;2177:54;;1640:597;-1:-1:-1;;;1640:597:1:o;4221:356::-;4423:2;4405:21;;;4442:18;;;4435:30;4501:34;4496:2;4481:18;;4474:62;4568:2;4553:18;;4221:356::o;6522:225::-;6562:3;6593:1;6589:6;6586:1;6583:13;6580:136;;;6638:10;6633:3;6629:20;6626:1;6619:31;6673:4;6670:1;6663:15;6701:4;6698:1;6691:15;6580:136;-1:-1:-1;6732:9:1;;6522:225::o;6752:380::-;6831:1;6827:12;;;;6874;;;6895:61;;6949:4;6941:6;6937:17;6927:27;;6895:61;7002:2;6994:6;6991:14;6971:18;6968:38;6965:161;;;7048:10;7043:3;7039:20;7036:1;7029:31;7083:4;7080:1;7073:15;7111:4;7108:1;7101:15;6965:161;;6752:380;;;:::o

ipfs://f21da13f8e90c51ab589b05dedd296b332e9ed2d3594ac1772726cab248559e1