Contract 0xe10f73a5021f077a08A500BE46ab379AFE8481C6 15

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibAsset, IERC20 } from "../Libraries/LibAsset.sol";
import { ReentrancyGuard } from "../Helpers/ReentrancyGuard.sol";
import { ZeroPostSwapBalance } from "../Errors/GenericErrors.sol";
import { Swapper, LibSwap } from "../Helpers/Swapper.sol";

/// @title Generic Swap Facet
/// @author LI.FI (https://li.fi)
/// @notice Provides functionality for swapping through ANY APPROVED DEX
/// @dev Uses calldata to execute APPROVED arbitrary methods on DEXs
contract GenericSwapFacet is ILiFi, Swapper, ReentrancyGuard {
    /// Events ///

    event LiFiSwappedGeneric(
        bytes32 indexed transactionId,
        string integrator,
        address referrer,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount
    );

    /// External Methods ///

    /// @notice Performs multiple swaps in one transaction
    /// @param _lifiData data used purely for tracking and analytics
    /// @param _swapData an array of swap related data for performing swaps before bridging
    function swapTokensGeneric(LiFiData calldata _lifiData, LibSwap.SwapData[] calldata _swapData)
        external
        payable
        nonReentrant
    {
        uint256 postSwapBalance = _executeAndCheckSwaps(_lifiData, _swapData);
        address receivingAssetId = _swapData[_swapData.length - 1].receivingAssetId;
        LibAsset.transferAsset(receivingAssetId, payable(msg.sender), postSwapBalance);

        emit LiFiSwappedGeneric(
            _lifiData.transactionId,
            _lifiData.integrator,
            _lifiData.referrer,
            _swapData[0].sendingAssetId,
            receivingAssetId,
            _swapData[0].fromAmount,
            postSwapBalance
        );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface ILiFi {
    /// Structs ///

    struct LiFiData {
        bytes32 transactionId;
        string integrator;
        address referrer;
        address sendingAssetId;
        address receivingAssetId;
        address receiver;
        uint256 destinationChainId;
        uint256 amount;
    }

    /// Events ///

    event LiFiTransferStarted(
        bytes32 indexed transactionId,
        string bridge,
        string bridgeData,
        string integrator,
        address referrer,
        address sendingAssetId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 destinationChainId,
        bool hasSourceSwap,
        bool hasDestinationCall
    );

    event LiFiTransferCompleted(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;
import { NullAddrIsNotAnERC20Token, NullAddrIsNotAValidSpender, NoTransferToNullAddress, InvalidAmount, NativeValueWithERC, NativeAssetTransferFailed } from "../Errors/GenericErrors.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/// @title LibAsset
/// @author Connext <[email protected]>
/// @notice This library contains helpers for dealing with onchain transfers
///         of assets, including accounting for the native asset `assetId`
///         conventions and any noncompliant ERC20 transfers
library LibAsset {
    uint256 private constant MAX_INT = type(uint256).max;

    address internal constant NULL_ADDRESS = 0x0000000000000000000000000000000000000000; //address(0)

    /// @dev All native assets use the empty address for their asset id
    ///      by convention

    address internal constant NATIVE_ASSETID = NULL_ADDRESS; //address(0)

    /// @notice Gets the balance of the inheriting contract for the given asset
    /// @param assetId The asset identifier to get the balance of
    /// @return Balance held by contracts using this library
    function getOwnBalance(address assetId) internal view returns (uint256) {
        return assetId == NATIVE_ASSETID ? address(this).balance : IERC20(assetId).balanceOf(address(this));
    }

    /// @notice Transfers ether from the inheriting contract to a given
    ///         recipient
    /// @param recipient Address to send ether to
    /// @param amount Amount to send to given recipient
    function transferNativeAsset(address payable recipient, uint256 amount) private {
        if (recipient == NULL_ADDRESS) revert NoTransferToNullAddress();
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = recipient.call{ value: amount }("");
        if (!success) revert NativeAssetTransferFailed();
    }

    /// @notice Gives MAX approval for another address to spend tokens
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param amount Amount to approve for spending
    function maxApproveERC20(
        IERC20 assetId,
        address spender,
        uint256 amount
    ) internal {
        if (address(assetId) == NATIVE_ASSETID) return;
        if (spender == NULL_ADDRESS) revert NullAddrIsNotAValidSpender();
        uint256 allowance = assetId.allowance(address(this), spender);
        if (allowance < amount) SafeERC20.safeApprove(IERC20(assetId), spender, MAX_INT);
    }

    /// @notice Transfers tokens from the inheriting contract to a given
    ///         recipient
    /// @param assetId Token address to transfer
    /// @param recipient Address to send token to
    /// @param amount Amount to send to given recipient
    function transferERC20(
        address assetId,
        address recipient,
        uint256 amount
    ) private {
        if (isNativeAsset(assetId)) revert NullAddrIsNotAnERC20Token();
        SafeERC20.safeTransfer(IERC20(assetId), recipient, amount);
    }

    /// @notice Transfers tokens from a sender to a given recipient
    /// @param assetId Token address to transfer
    /// @param from Address of sender/owner
    /// @param to Address of recipient/spender
    /// @param amount Amount to transfer from owner to spender
    function transferFromERC20(
        address assetId,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (assetId == NATIVE_ASSETID) revert NullAddrIsNotAnERC20Token();
        if (to == NULL_ADDRESS) revert NoTransferToNullAddress();
        SafeERC20.safeTransferFrom(IERC20(assetId), from, to, amount);
    }

    /// @notice Deposits an asset into the contract and performs checks to avoid NativeValueWithERC
    /// @param tokenId Token to deposit
    /// @param amount Amount to deposit
    /// @param isNative Wether the token is native or ERC20
    function depositAsset(
        address tokenId,
        uint256 amount,
        bool isNative
    ) internal {
        if (amount == 0) revert InvalidAmount();
        if (isNative) {
            if (msg.value != amount) revert InvalidAmount();
        } else {
            if (msg.value != 0) revert NativeValueWithERC();
            uint256 _fromTokenBalance = LibAsset.getOwnBalance(tokenId);
            LibAsset.transferFromERC20(tokenId, msg.sender, address(this), amount);
            if (LibAsset.getOwnBalance(tokenId) - _fromTokenBalance != amount) revert InvalidAmount();
        }
    }

    /// @notice Overload for depositAsset(address tokenId, uint256 amount, bool isNative)
    /// @param tokenId Token to deposit
    /// @param amount Amount to deposit
    function depositAsset(address tokenId, uint256 amount) internal {
        return depositAsset(tokenId, amount, tokenId == NATIVE_ASSETID);
    }

    /// @notice Determines whether the given assetId is the native asset
    /// @param assetId The asset identifier to evaluate
    /// @return Boolean indicating if the asset is the native asset
    function isNativeAsset(address assetId) internal pure returns (bool) {
        return assetId == NATIVE_ASSETID;
    }

    /// @notice Wrapper function to transfer a given asset (native or erc20) to
    ///         some recipient. Should handle all non-compliant return value
    ///         tokens as well by using the SafeERC20 contract by open zeppelin.
    /// @param assetId Asset id for transfer (address(0) for native asset,
    ///                token address for erc20s)
    /// @param recipient Address to send asset to
    /// @param amount Amount to send to given recipient
    function transferAsset(
        address assetId,
        address payable recipient,
        uint256 amount
    ) internal {
        (assetId == NATIVE_ASSETID)
            ? transferNativeAsset(recipient, amount)
            : transferERC20(assetId, recipient, amount);
    }

    /// @dev Checks whether the given address is a contract and contains code
    function isContract(address _contractAddr) internal view returns (bool) {
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(_contractAddr)
        }
        return size > 0;
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

/// @title Reentrancy Guard
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide protection against reentrancy
abstract contract ReentrancyGuard {
    /// Storage ///

    bytes32 private constant NAMESPACE = hex"a65bb2f450488ab0858c00edc14abc5297769bf42adb48cfb77752890e8b697b";

    /// Types ///

    struct ReentrancyStorage {
        uint256 status;
    }

    /// Errors ///

    error ReentrancyError();

    /// Constants ///

    uint256 private constant _NOT_ENTERED = 0;
    uint256 private constant _ENTERED = 1;

    /// Modifiers ///

    modifier nonReentrant() {
        ReentrancyStorage storage s = reentrancyStorage();
        if (s.status == _ENTERED) revert ReentrancyError();
        s.status = _ENTERED;
        _;
        s.status = _NOT_ENTERED;
    }

    /// Private Methods ///

    /// @dev fetch local storage
    function reentrancyStorage() private pure returns (ReentrancyStorage storage data) {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            data.slot := position
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

error InvalidAmount();
error TokenAddressIsZero();
error CannotBridgeToSameNetwork();
error ZeroPostSwapBalance();
error InvalidBridgeConfigLength();
error NoSwapDataProvided();
error NativeValueWithERC();
error ContractCallNotAllowed();
error NullAddrIsNotAValidSpender();
error NullAddrIsNotAnERC20Token();
error NoTransferToNullAddress();
error NativeAssetTransferFailed();
error InvalidContract();
error InvalidConfig();

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibStorage } from "../Libraries/LibStorage.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { InvalidAmount, ContractCallNotAllowed, NoSwapDataProvided } from "../Errors/GenericErrors.sol";

/// @title Swapper
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide swap functionality
contract Swapper is ILiFi {
    /// Storage ///

    LibStorage internal appStorage;

    /// Modifiers ///

    /// @dev Sends any leftover balances back to the user
    modifier noLeftovers(LibSwap.SwapData[] calldata _swapData) {
        uint256 nSwaps = _swapData.length;
        if (nSwaps != 1) {
            uint256[] memory initialBalances = _fetchBalances(_swapData);
            address finalAsset = _swapData[nSwaps - 1].receivingAssetId;
            uint256 curBalance = 0;

            _;

            for (uint256 i = 0; i < nSwaps - 1; i++) {
                address curAsset = _swapData[i].receivingAssetId;
                if (curAsset == finalAsset) continue; // Handle multi-to-one swaps
                curBalance = LibAsset.getOwnBalance(curAsset) - initialBalances[i];
                if (curBalance > 0) LibAsset.transferAsset(curAsset, payable(msg.sender), curBalance);
            }
        } else _;
    }

    /// Internal Methods ///

    /// @dev Validates input before executing swaps
    /// @param _lifiData LiFi tracking data
    /// @param _swapData Array of data used to execute swaps
    function _executeAndCheckSwaps(LiFiData memory _lifiData, LibSwap.SwapData[] calldata _swapData)
        internal
        returns (uint256)
    {
        uint256 nSwaps = _swapData.length;
        if (nSwaps == 0) revert NoSwapDataProvided();
        address finalTokenId = _swapData[_swapData.length - 1].receivingAssetId;
        uint256 swapBalance = LibAsset.getOwnBalance(finalTokenId);
        _executeSwaps(_lifiData, _swapData);
        swapBalance = LibAsset.getOwnBalance(finalTokenId) - swapBalance;
        if (swapBalance == 0) revert InvalidAmount();
        return swapBalance;
    }

    /// Private Methods ///

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _lifiData LiFi tracking data
    /// @param _swapData Array of data used to execute swaps
    function _executeSwaps(LiFiData memory _lifiData, LibSwap.SwapData[] calldata _swapData)
        private
        noLeftovers(_swapData)
    {
        for (uint256 i = 0; i < _swapData.length; i++) {
            LibSwap.SwapData calldata currentSwapData = _swapData[i];
            if (
                !(appStorage.dexAllowlist[currentSwapData.approveTo] &&
                    appStorage.dexAllowlist[currentSwapData.callTo] &&
                    appStorage.dexFuncSignatureAllowList[bytes32(currentSwapData.callData[:8])])
            ) revert ContractCallNotAllowed();
            LibSwap.swap(_lifiData.transactionId, currentSwapData);
        }
    }

    /// @dev Fetches balances of tokens to be swapped before swapping.
    /// @param _swapData Array of data used to execute swaps
    /// @return uint256[] Array of token balances.
    function _fetchBalances(LibSwap.SwapData[] calldata _swapData) private view returns (uint256[] memory) {
        uint256 length = _swapData.length;
        uint256[] memory balances = new uint256[](length);
        for (uint256 i = 0; i < length; i++) balances[i] = LibAsset.getOwnBalance(_swapData[i].receivingAssetId);
        return balances;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { LibAsset, IERC20 } from "./LibAsset.sol";
import { LibUtil } from "./LibUtil.sol";
import { InvalidContract } from "../Errors/GenericErrors.sol";

library LibSwap {
    error NoSwapFromZeroBalance();

    struct SwapData {
        address callTo;
        address approveTo;
        address sendingAssetId;
        address receivingAssetId;
        uint256 fromAmount;
        bytes callData;
    }

    event AssetSwapped(
        bytes32 transactionId,
        address dex,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount,
        uint256 timestamp
    );

    function swap(bytes32 transactionId, SwapData calldata _swapData) internal {
        if (!LibAsset.isContract(_swapData.callTo)) revert InvalidContract();
        uint256 fromAmount = _swapData.fromAmount;
        if (fromAmount == 0) revert NoSwapFromZeroBalance();
        uint256 nativeValue = 0;
        address fromAssetId = _swapData.sendingAssetId;
        address toAssetId = _swapData.receivingAssetId;
        uint256 initialSendingAssetBalance = LibAsset.getOwnBalance(fromAssetId);
        uint256 initialReceivingAssetBalance = LibAsset.getOwnBalance(toAssetId);
        uint256 toDeposit = initialSendingAssetBalance < fromAmount ? fromAmount - initialSendingAssetBalance : 0;

        if (!LibAsset.isNativeAsset(fromAssetId)) {
            LibAsset.maxApproveERC20(IERC20(fromAssetId), _swapData.approveTo, fromAmount);
            if (toDeposit != 0) {
                LibAsset.transferFromERC20(fromAssetId, msg.sender, address(this), toDeposit);
            }
        } else {
            nativeValue = fromAmount;
        }

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = _swapData.callTo.call{ value: nativeValue }(_swapData.callData);
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }

        emit AssetSwapped(
            transactionId,
            _swapData.callTo,
            _swapData.sendingAssetId,
            toAssetId,
            fromAmount,
            LibAsset.getOwnBalance(toAssetId) - initialReceivingAssetBalance,
            block.timestamp
        );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

struct LibStorage {
    mapping(address => bool) dexAllowlist;
    mapping(bytes32 => bool) dexFuncSignatureAllowList;
    address[] dexs;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import "./LibBytes.sol";

library LibUtil {
    using LibBytes for bytes;

    function getRevertMsg(bytes memory _res) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

library LibBytes {
    // solhint-disable no-inline-assembly

    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        // solhint-disable-next-line no-empty-blocks
                        for {

                        } eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"ContractCallNotAllowed","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidContract","type":"error"},{"inputs":[],"name":"NativeAssetTransferFailed","type":"error"},{"inputs":[],"name":"NoSwapDataProvided","type":"error"},{"inputs":[],"name":"NoSwapFromZeroBalance","type":"error"},{"inputs":[],"name":"NoTransferToNullAddress","type":"error"},{"inputs":[],"name":"NullAddrIsNotAValidSpender","type":"error"},{"inputs":[],"name":"NullAddrIsNotAnERC20Token","type":"error"},{"inputs":[],"name":"ReentrancyError","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"string","name":"integrator","type":"string"},{"indexed":false,"internalType":"address","name":"referrer","type":"address"},{"indexed":false,"internalType":"address","name":"fromAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"toAssetId","type":"address"},{"indexed":false,"internalType":"uint256","name":"fromAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toAmount","type":"uint256"}],"name":"LiFiSwappedGeneric","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"LiFiTransferCompleted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"string","name":"bridge","type":"string"},{"indexed":false,"internalType":"string","name":"bridgeData","type":"string"},{"indexed":false,"internalType":"string","name":"integrator","type":"string"},{"indexed":false,"internalType":"address","name":"referrer","type":"address"},{"indexed":false,"internalType":"address","name":"sendingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"indexed":false,"internalType":"bool","name":"hasSourceSwap","type":"bool"},{"indexed":false,"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"name":"LiFiTransferStarted","type":"event"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ILiFi.LiFiData","name":"_lifiData","type":"tuple"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"}],"internalType":"struct LibSwap.SwapData[]","name":"_swapData","type":"tuple[]"}],"name":"swapTokensGeneric","outputs":[],"stateMutability":"payable","type":"function"}]

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