Contract 0xb66656036e906e510b243f9e9a66e5599289b9cb

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.6.12;

import "./ERC20.sol";
import "../interfaces/ILosslessV2Pool.sol";

contract LosslessV2Token is ERC20 {
	address public adminPool;

	// limit only pool can mint token
	modifier onlyAdminPool() {
		require(msg.sender == adminPool, "LosslessV2Token: FORBIDDEN");
		_;
	}

	constructor(
		string memory _name,
		string memory _symbol,
		uint8 _decimals,
		address _adminPool
	) public ERC20(_name, _symbol, _decimals) {
		require(address(0) != _adminPool, "LosslessV2Token: set pool to the zero address");
		adminPool = _adminPool;
	}

	function mint(address _to, uint256 _amount) external onlyAdminPool returns (bool) {
		_mint(_to, _amount);
		return true;
	}

	function burn(address _from, uint256 _amount) external onlyAdminPool returns (bool) {
		_burn(_from, _amount);
		return true;
	}
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.6.12;

import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
	using SafeMath for uint256;

	mapping(address => uint256) private _balances;

	mapping(address => mapping(address => uint256)) private _allowances;

	uint256 private _totalSupply;

	string private _name;
	string private _symbol;
	uint8 private _decimals;

	/**
	 * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
	 * a default value of 18.
	 *
	 * To select a different value for {decimals}, use {_setupDecimals}.
	 *
	 * All three of these values are immutable: they can only be set once during
	 * construction.
	 */
	constructor(
		string memory name_,
		string memory symbol_,
		uint8 decimals_
	) public {
		_name = name_;
		_symbol = symbol_;
		_decimals = decimals_;
	}

	/**
	 * @dev Returns the name of the token.
	 */
	function name() public view virtual returns (string memory) {
		return _name;
	}

	/**
	 * @dev Returns the symbol of the token, usually a shorter version of the
	 * name.
	 */
	function symbol() public view virtual returns (string memory) {
		return _symbol;
	}

	/**
	 * @dev Returns the number of decimals used to get its user representation.
	 * For example, if `decimals` equals `2`, a balance of `505` tokens should
	 * be displayed to a user as `5,05` (`505 / 10 ** 2`).
	 *
	 * Tokens usually opt for a value of 18, imitating the relationship between
	 * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
	 * called.
	 *
	 * NOTE: This information is only used for _display_ purposes: it in
	 * no way affects any of the arithmetic of the contract, including
	 * {IERC20-balanceOf} and {IERC20-transfer}.
	 */
	function decimals() public view virtual returns (uint8) {
		return _decimals;
	}

	/**
	 * @dev See {IERC20-totalSupply}.
	 */
	function totalSupply() public view virtual override returns (uint256) {
		return _totalSupply;
	}

	/**
	 * @dev See {IERC20-balanceOf}.
	 */
	function balanceOf(address account) public view virtual override returns (uint256) {
		return _balances[account];
	}

	/**
	 * @dev See {IERC20-transfer}.
	 *
	 * Requirements:
	 *
	 * - `recipient` cannot be the zero address.
	 * - the caller must have a balance of at least `amount`.
	 */
	function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
		_transfer(_msgSender(), recipient, amount);
		return true;
	}

	/**
	 * @dev See {IERC20-allowance}.
	 */
	function allowance(address owner, address spender) public view virtual override returns (uint256) {
		return _allowances[owner][spender];
	}

	/**
	 * @dev See {IERC20-approve}.
	 *
	 * Requirements:
	 *
	 * - `spender` cannot be the zero address.
	 */
	function approve(address spender, uint256 amount) public virtual override returns (bool) {
		_approve(_msgSender(), spender, amount);
		return true;
	}

	/**
	 * @dev See {IERC20-transferFrom}.
	 *
	 * Emits an {Approval} event indicating the updated allowance. This is not
	 * required by the EIP. See the note at the beginning of {ERC20}.
	 *
	 * Requirements:
	 *
	 * - `sender` and `recipient` cannot be the zero address.
	 * - `sender` must have a balance of at least `amount`.
	 * - the caller must have allowance for ``sender``'s tokens of at least
	 * `amount`.
	 */
	function transferFrom(
		address sender,
		address recipient,
		uint256 amount
	) public virtual override returns (bool) {
		_transfer(sender, recipient, amount);
		_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
		return true;
	}

	/**
	 * @dev Atomically increases the allowance granted to `spender` by the caller.
	 *
	 * This is an alternative to {approve} that can be used as a mitigation for
	 * problems described in {IERC20-approve}.
	 *
	 * Emits an {Approval} event indicating the updated allowance.
	 *
	 * Requirements:
	 *
	 * - `spender` cannot be the zero address.
	 */
	function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
		_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
		return true;
	}

	/**
	 * @dev Atomically decreases the allowance granted to `spender` by the caller.
	 *
	 * This is an alternative to {approve} that can be used as a mitigation for
	 * problems described in {IERC20-approve}.
	 *
	 * Emits an {Approval} event indicating the updated allowance.
	 *
	 * Requirements:
	 *
	 * - `spender` cannot be the zero address.
	 * - `spender` must have allowance for the caller of at least
	 * `subtractedValue`.
	 */
	function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
		_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
		return true;
	}

	/**
	 * @dev Moves tokens `amount` from `sender` to `recipient`.
	 *
	 * This is internal function is equivalent to {transfer}, and can be used to
	 * e.g. implement automatic token fees, slashing mechanisms, etc.
	 *
	 * Emits a {Transfer} event.
	 *
	 * Requirements:
	 *
	 * - `sender` cannot be the zero address.
	 * - `recipient` cannot be the zero address.
	 * - `sender` must have a balance of at least `amount`.
	 */
	function _transfer(
		address sender,
		address recipient,
		uint256 amount
	) internal virtual {
		require(sender != address(0), "ERC20: transfer from the zero address");
		require(recipient != address(0), "ERC20: transfer to the zero address");

		_beforeTokenTransfer(sender, recipient, amount);

		_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
		_balances[recipient] = _balances[recipient].add(amount);
		emit Transfer(sender, recipient, amount);
	}

	/** @dev Creates `amount` tokens and assigns them to `account`, increasing
	 * the total supply.
	 *
	 * Emits a {Transfer} event with `from` set to the zero address.
	 *
	 * Requirements:
	 *
	 * - `to` cannot be the zero address.
	 */
	function _mint(address account, uint256 amount) internal virtual {
		require(account != address(0), "ERC20: mint to the zero address");

		_beforeTokenTransfer(address(0), account, amount);

		_totalSupply = _totalSupply.add(amount);
		_balances[account] = _balances[account].add(amount);
		emit Transfer(address(0), account, amount);
	}

	/**
	 * @dev Destroys `amount` tokens from `account`, reducing the
	 * total supply.
	 *
	 * Emits a {Transfer} event with `to` set to the zero address.
	 *
	 * Requirements:
	 *
	 * - `account` cannot be the zero address.
	 * - `account` must have at least `amount` tokens.
	 */
	function _burn(address account, uint256 amount) internal virtual {
		require(account != address(0), "ERC20: burn from the zero address");

		_beforeTokenTransfer(account, address(0), amount);

		_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
		_totalSupply = _totalSupply.sub(amount);
		emit Transfer(account, address(0), amount);
	}

	/**
	 * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
	 *
	 * This internal function is equivalent to `approve`, and can be used to
	 * e.g. set automatic allowances for certain subsystems, etc.
	 *
	 * Emits an {Approval} event.
	 *
	 * Requirements:
	 *
	 * - `owner` cannot be the zero address.
	 * - `spender` cannot be the zero address.
	 */
	function _approve(
		address owner,
		address spender,
		uint256 amount
	) internal virtual {
		require(owner != address(0), "ERC20: approve from the zero address");
		require(spender != address(0), "ERC20: approve to the zero address");

		_allowances[owner][spender] = amount;
		emit Approval(owner, spender, amount);
	}

	/**
	 * @dev Sets {decimals} to a value other than the default one of 18.
	 *
	 * WARNING: This function should only be called from the constructor. Most
	 * applications that interact with token contracts will not expect
	 * {decimals} to ever change, and may work incorrectly if it does.
	 */
	function _setupDecimals(uint8 decimals_) internal virtual {
		_decimals = decimals_;
	}

	/**
	 * @dev Hook that is called before any transfer of tokens. This includes
	 * minting and burning.
	 *
	 * Calling conditions:
	 *
	 * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
	 * will be to transferred to `to`.
	 * - when `from` is zero, `amount` tokens will be minted for `to`.
	 * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
	 * - `from` and `to` are never both zero.
	 *
	 * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
	 */
	function _beforeTokenTransfer(
		address from,
		address to,
		uint256 amount
	) internal virtual {}
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.6.12;

interface ILosslessV2Pool {
	// defined and controls all game logic related variables
	struct GameStatus {
		bool isShortLastRoundWinner; // record whether last round winner
		bool isFirstUser; // check if the user is the first one to enter the game or not
		bool isFirstRound; // is this game the first round of the entire pool?
		uint256 gameRound; // count for showing current game round
		uint256 durationOfGame; // which should be 6 days in default
		uint256 durationOfBidding; // which should be 1 days in default
		uint256 lastUpdateTimestamp; // the timestamp when last game logic function been called
		int256 initialPrice; // game initial price
		int256 endPrice; // game end price
		PoolStatus currState; // current pool status
	}

	// token info for current pool
	struct PoolTokensInfo {
		address longToken;
		address shortToken;
		address sponsorToken;
	}

	// # ENUM FOR POOL STATUS
	/*  
      PoolStatus Explaination
      *****
        Locked ------ game period. interacting with compound
        Accepting --- users can adding or reducing the bet
        FirstGame --- only been used for the first round
		Terminated -- only when special cases admin decided to close the pool

      Notation
      ******
        /name/ - status name
        [name] - function call name

      Workflow
      *******  

                                    
                     /Accepting/            /Locked/         /Accepting/				/Terminated/
                          |                     |                | 							 |
    [startFirstRound] ---------> [startGame] -------> [endGame] ---> [poolTermination] --------------->
                                      ^                    | |
                                      |                    | record time
                                       --------------------
                                                 |
                                            /Accepting/
    */
	enum PoolStatus {
		FirstGame,
		Locked,
		Accepting,
		Terminated
	}

	// ## DEFINE USER OPERATION EVENTS
	event Deposit(uint256 shortPrincipalAmount, uint256 longPrincipalAmount);
	event Withdraw(bool isAToken, uint256 shortTokenAmount, uint256 longTokenAmount);
	event SponsorDeposit(uint256 principalAmount);
	event SponsorWithdraw(uint256 sponsorTokenAmount);
	// ## DEFINE GAME OPERATION EVENTS
	event UpdateTokenValue(uint256 valuePerShortToken, uint256 valuePerLongToken);
	event AnnounceWinner(bool isShortLastRoundWinner, int256 initialPrice, int256 endPrice);

	// ## PUBLIC VARIABLES
	function factory() external view returns (address);

	function bidToken() external view returns (address);

	function principalToken() external view returns (address);

	function aToken() external view returns (address);

	function addressProvider() external view returns (address);

	// ### GAME SETTING VARIABLES
	function inPoolTimestamp(address userAddress) external view returns (uint256);

	// ## STATE-CHANGING FUNCTION
	/* 
		initialize: 		initialize the game
		startFirstRound: 	start the frist round logic
		startGame: 			start game -> pool lock supply principal to AAVE, get start game price
		endGame: 			end game -> pool unlock redeem fund to AAVE, get end game price
		poolTermination:	terminate the pool, no more game, but user can still withdraw fund
    */
	function initialize(
		address shortToken_,
		address longToken_,
		address sponsorToken_
	) external;

	function startFirstRound() external; // only be called to start the first Round

	function startGame() external; // called after bidding duration

	function endGame() external; // called after game duraion

	///@dev admin only
	function poolTermination() external; // called after selectWinner only by admin

	// user actions in below, join game, add, reduce or withDraw all fund
	/* 
		deposit: 			adding funds can be either just long or short or both
		withdraw: 			reduce funds can be either just long or short or both
		swap: 				change amount of tokens from long -> short / short -> long
		sponsorDeposit:		deposit principal to the pool as interest sponsor
		sponsorWithdraw:	withdraw sponsor donation from the pool
    */
	function deposit(uint256 shortPrincipalAmount, uint256 longPrincipalAmount) external;

	function withdraw(
		bool isAToken,
		uint256 shortTokenAmount,
		uint256 longTokenAmount
	) external;

	function swap(bool fromLongToShort, uint256 swapTokenAmount) external;

	function sponsorDeposit(uint256 principalAmount) external;

	function sponsorWithdraw(uint256 sponsorTokenAmount) external;
	
	function claimAAVE(address stakedAAVEAddress_, uint256 amount_ ) external;

	// view functions to return user balance
	function userLongPrincipalBalance(address userAddress) external view returns (uint256);

	function userShortPrincipalBalance(address userAddress) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"uint8","name":"_decimals","type":"uint8"},{"internalType":"address","name":"_adminPool","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"adminPool","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"burn","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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