Contract 0xa9937092c4e2b0277c16802cc8778d252854688a 2

/**
 *Submitted for verification at polygonscan.com on 2021-11-18
*/

// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/GSN/Context.sol


pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


pragma solidity ^0.6.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol


pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol


pragma solidity ^0.6.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol


pragma solidity ^0.6.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: contracts/farms/olive/OliveToken.sol


pragma solidity 0.6.12;



// OliveToken with Governance.
contract OliveToken is ERC20('OliveCash Token', 'pOLIVE'), Ownable {
    /// @dev Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
        _moveDelegates(address(0), _delegates[_to], _amount);
    }

    // Copied and modified from YAM code:
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
    // Which is copied and modified from COMPOUND:
    // https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol

    /// @dev A record of each accounts delegate
    mapping (address => address) internal _delegates;

    /// @dev A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @dev A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    /// @dev The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    /// @dev The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    /// @dev The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @dev A record of states for signing / validating signatures
    mapping (address => uint) public nonces;

    /// @dev An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @dev An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);

    /**
     * @dev Delegate votes from `msg.sender` to `delegatee`
     * @param delegator The address to get delegatee for
     */
    function delegates(address delegator)
    external
    view
    returns (address)
    {
        return _delegates[delegator];
    }

    /**
     * @dev Delegate votes from `msg.sender` to `delegatee`
     * @param delegatee The address to delegate votes to
     */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @dev Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(
        address delegatee,
        uint nonce,
        uint expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
    external
    {
        bytes32 domainSeparator = keccak256(
            abi.encode(
                DOMAIN_TYPEHASH,
                keccak256(bytes(name())),
                getChainId(),
                address(this)
            )
        );

        bytes32 structHash = keccak256(
            abi.encode(
                DELEGATION_TYPEHASH,
                delegatee,
                nonce,
                expiry
            )
        );

        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                domainSeparator,
                structHash
            )
        );

        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "OLIVE::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "OLIVE::delegateBySig: invalid nonce");
        require(now <= expiry, "OLIVE::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @dev Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account)
    external
    view
    returns (uint256)
    {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @dev Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber)
    external
    view
    returns (uint256)
    {
        require(blockNumber < block.number, "OLIVE::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee)
    internal
    {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator); // balance of underlying OLIVEs (not scaled);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(
        address delegatee,
        uint32 nCheckpoints,
        uint256 oldVotes,
        uint256 newVotes
    )
    internal
    {
        uint32 blockNumber = safe32(block.number, "OLIVE::_writeCheckpoint: block number exceeds 32 bits");

        if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal pure returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }
}

// File: contracts/farms/olive/OliveBar.sol


pragma solidity 0.6.12;



contract OliveBar is Ownable {

    OliveToken public olive;

    constructor(OliveToken _olive) public {
        olive = _olive;
    }

    // Safe OLIVE transfer function, just in case if rounding error causes pool to not have enough OLIVEs.
    function safeOliveTransfer(address _to, uint256 _amount) public onlyOwner {
        uint256 oliveBal = olive.balanceOf(address(this));
        if (_amount > oliveBal) {
            olive.transfer(_to, oliveBal);
        } else {
            olive.transfer(_to, _amount);
        }
    }
}

// File: contracts/farms/olive/MasterChef.sol


pragma solidity 0.6.12;








contract MasterChef is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;         // How many LP tokens the user has provided.
        uint256 rewardDebt;     // Reward debt. See explanation below.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. OLIVE to distribute per block.
        uint256 lastRewardBlock;  // Last block number that OLIVE distribution occurs.
        uint256 accOlivePerShare;   // Accumulated OLIVE per share, times 1e12. See below.
    }

    OliveToken public olive;
    OliveBar public oliveBar;
    address public devaddr;
    uint256 public olivePerBlock;

    PoolInfo[] public poolInfo;
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;
    uint256 public totalAllocPoint = 0;
    uint256 public startBlock;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event SetDevAddress(address indexed user, address indexed newAddress);

    constructor(
        OliveToken _olive,
        OliveBar _oliveBar,
        address _devaddr,
        uint256 _olivePerBlock,
        uint256 _startBlock
    ) public {
        olive = _olive;
        oliveBar = _oliveBar;
        devaddr = _devaddr;
        olivePerBlock = _olivePerBlock;
        startBlock = _startBlock;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    mapping(IERC20 => bool) public poolExistence;
    modifier nonDuplicated(IERC20 _lpToken) {
        require(poolExistence[_lpToken] == false, "nonDuplicated: duplicated");
        _;
    }

    modifier poolExists(uint256 pid) {
        require(pid < poolInfo.length, "pool inexistent");
        _;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    function add(uint256 _allocPoint, IERC20 _lpToken, bool _withUpdate) public onlyOwner nonDuplicated(_lpToken) {
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolExistence[_lpToken] = true;
        poolInfo.push(PoolInfo({
        lpToken : _lpToken,
        allocPoint : _allocPoint,
        lastRewardBlock : lastRewardBlock,
        accOlivePerShare : 0
        }));
    }

    // Update the given pool's OLIVE allocation point. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, bool _withUpdate) public onlyOwner poolExists(_pid) {
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to) public pure returns (uint256) {
        return _to.sub(_from);
    }

    // View function to see pending OLIVEs on frontend.
    function pendingOlive(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accOlivePerShare = pool.accOlivePerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (block.number > pool.lastRewardBlock && lpSupply != 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
            uint256 oliveReward = multiplier.mul(olivePerBlock).mul(pool.allocPoint).div(totalAllocPoint);
            accOlivePerShare = accOlivePerShare.add(oliveReward.mul(1e12).div(lpSupply));
        }
        return user.amount.mul(accOlivePerShare).div(1e12).sub(user.rewardDebt);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (lpSupply == 0 || pool.allocPoint == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
        uint256 oliveReward = multiplier.mul(olivePerBlock).mul(pool.allocPoint).div(totalAllocPoint);
        olive.mint(devaddr, oliveReward.div(10));
        olive.mint(address(oliveBar), oliveReward);
        pool.accOlivePerShare = pool.accOlivePerShare.add(oliveReward.mul(1e12).div(lpSupply));
        pool.lastRewardBlock = block.number;
    }

    // Deposit LP tokens to MasterChef for OLIVE allocation.
    function deposit(uint256 _pid, uint256 _amount) public nonReentrant poolExists(_pid) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accOlivePerShare).div(1e12).sub(user.rewardDebt);
            if (pending > 0) {
                safeOliveTransfer(msg.sender, pending);
            }
        }
        if (_amount > 0) {
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
            user.amount = user.amount.add(_amount);
        }
        user.rewardDebt = user.amount.mul(pool.accOlivePerShare).div(1e12);
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from MasterChef.
    function withdraw(uint256 _pid, uint256 _amount) public nonReentrant poolExists(_pid) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accOlivePerShare).div(1e12).sub(user.rewardDebt);
        if (pending > 0) {
            safeOliveTransfer(msg.sender, pending);
        }
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
        }
        user.rewardDebt = user.amount.mul(pool.accOlivePerShare).div(1e12);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public nonReentrant poolExists(_pid) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.lpToken.safeTransfer(address(msg.sender), amount);
        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    // Safe OLIVE transfer function, just in case if rounding error causes pool to not have enough OLIVEs.
    function safeOliveTransfer(address _to, uint256 _amount) internal {
        oliveBar.safeOliveTransfer(_to, _amount);
    }

    // Update dev address by the previous dev.
    function dev(address _devaddr) public {
        require(msg.sender == devaddr, "dev: wut?");
        devaddr = _devaddr;
        emit SetDevAddress(msg.sender, _devaddr);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract OliveToken","name":"_olive","type":"address"},{"internalType":"contract OliveBar","name":"_oliveBar","type":"address"},{"internalType":"address","name":"_devaddr","type":"address"},{"internalType":"uint256","name":"_olivePerBlock","type":"uint256"},{"internalType":"uint256","name":"_startBlock","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetDevAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_lpToken","type":"address"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_devaddr","type":"address"}],"name":"dev","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devaddr","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_from","type":"uint256"},{"internalType":"uint256","name":"_to","type":"uint256"}],"name":"getMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"olive","outputs":[{"internalType":"contract OliveToken","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"oliveBar","outputs":[{"internalType":"contract OliveBar","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"olivePerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingOlive","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"name":"poolExistence","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accOlivePerShare","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000617724974218a18769020a70162165a539c07e8a000000000000000000000000cdc96f6e5cbd565812ebca60dc20273530464ea9000000000000000000000000cdee5108413e80af6c84bdd3ab0d328a3d63dda40000000000000000000000000000000000000000000000000de0b6b3a76400000000000000000000000000000000000000000000000000000000000000feab50

-----Decoded View---------------
Arg [0] : _olive (address): 0x617724974218a18769020a70162165a539c07e8a
Arg [1] : _oliveBar (address): 0xcdc96f6e5cbd565812ebca60dc20273530464ea9
Arg [2] : _devaddr (address): 0xcdee5108413e80af6c84bdd3ab0d328a3d63dda4
Arg [3] : _olivePerBlock (uint256): 1000000000000000000
Arg [4] : _startBlock (uint256): 16690000

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000617724974218a18769020a70162165a539c07e8a
Arg [1] : 000000000000000000000000cdc96f6e5cbd565812ebca60dc20273530464ea9
Arg [2] : 000000000000000000000000cdee5108413e80af6c84bdd3ab0d328a3d63dda4
Arg [3] : 0000000000000000000000000000000000000000000000000de0b6b3a7640000
Arg [4] : 0000000000000000000000000000000000000000000000000000000000feab50

44640:8053:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46380:95;;;:::i;:::-;;;;;;;;;;;;;;;;48118:768;;;;;;;;;;;;;;;;-1:-1:-1;48118:768:0;;;;;;-1:-1:-1;;;;;48118:768:0;;:::i;45525:26::-;;;;;;;;;;;;;;;;-1:-1:-1;45525:26:0;;:::i;:::-;;;;-1:-1:-1;;;;;45525:26:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45629:34;;;:::i;46871:567::-;;;;;;;;;;;;;;;;-1:-1:-1;46871:567:0;;;-1:-1:-1;;;;;46871:567:0;;;;;;;;;;;;:::i;:::-;;50952:775;;;;;;;;;;;;;;;;-1:-1:-1;50952:775:0;;;;;;;:::i;45670:25::-;;;:::i;49225:818::-;;;;;;;;;;;;;;;;-1:-1:-1;49225:818:0;;:::i;51798:415::-;;;;;;;;;;;;;;;;-1:-1:-1;51798:415:0;;:::i;48969:180::-;;;:::i;47535:321::-;;;;;;;;;;;;;;;;-1:-1:-1;47535:321:0;;;;;;;;;;;;;;:::i;2745:148::-;;;:::i;52510:180::-;;;;;;;;;;;;;;;;-1:-1:-1;52510:180:0;-1:-1:-1;;;;;52510:180:0;;:::i;2103:79::-;;;:::i;:::-;;;;-1:-1:-1;;;;;2103:79:0;;;;;;;;;;;;;;47932:121;;;;;;;;;;;;;;;;-1:-1:-1;47932:121:0;;;;;;;:::i;45558:64::-;;;;;;;;;;;;;;;;-1:-1:-1;45558:64:0;;;;;;-1:-1:-1;;;;;45558:64:0;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;45398:23;;;:::i;45428:24::-;;;:::i;45488:28::-;;;:::i;46483:44::-;;;;;;;;;;;;;;;;-1:-1:-1;46483:44:0;-1:-1:-1;;;;;46483:44:0;;:::i;:::-;;;;;;;;;;;;;;;;;;45459:22;;;:::i;50113:787::-;;;;;;;;;;;;;;;;-1:-1:-1;50113:787:0;;;;;;;:::i;3048:244::-;;;;;;;;;;;;;;;;-1:-1:-1;3048:244:0;-1:-1:-1;;;;;3048:244:0;;:::i;46380:95::-;46452:8;:15;46380:95;:::o;48118:768::-;48192:7;48212:21;48236:8;48245:4;48236:14;;;;;;;;;;;;;;;;48285;;;:8;:14;;;;;;-1:-1:-1;;;;;48285:21:0;;;;;;;;;;;48236:14;;;;;;;48344:21;;;;48395:12;;:37;;-1:-1:-1;;;48395:37:0;;48426:4;48395:37;;;;;;;;;48236:14;;-1:-1:-1;48285:21:0;;48344;;48236:14;;48395:12;;;;;:22;;:37;;;;;48236:14;;48395:37;;;;;:12;:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;48395:37:0;48462:20;;;;48395:37;;-1:-1:-1;48447:12:0;:35;:52;;;;-1:-1:-1;48486:13:0;;;48447:52;48443:354;;;48516:18;48537:49;48551:4;:20;;;48573:12;48537:13;:49::i;:::-;48516:70;;48601:19;48623:71;48678:15;;48623:50;48657:4;:15;;;48623:29;48638:13;;48623:10;:14;;:29;;;;:::i;:::-;:33;;:50::i;:::-;:54;;:71::i;:::-;48601:93;-1:-1:-1;48728:57:0;48749:35;48775:8;48749:21;48601:93;48765:4;48749:15;:21::i;:35::-;48728:16;;:20;:57::i;:::-;48709:76;;48443:354;;;48814:64;48862:4;:15;;;48814:43;48852:4;48814:33;48830:16;48814:4;:11;;;:15;;:33;;;;:::i;:43::-;:47;;:64::i;:::-;48807:71;;;;;;48118:768;;;;;:::o;45525:26::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;45525:26:0;;;;-1:-1:-1;45525:26:0;;;:::o;45629:34::-;;;;:::o;46871:567::-;2325:12;:10;:12::i;:::-;2315:6;;-1:-1:-1;;;;;2315:6:0;;;:22;;;2307:67;;;;;-1:-1:-1;;;2307:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2307:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;46593:23:0;::::1;;::::0;;;:13:::1;:23;::::0;;;;;46971:8;;46593:23:::1;;:32;46585:70;;;::::0;;-1:-1:-1;;;46585:70:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;::::1;::::0;;;;;;;;;;;;;::::1;;46996:11:::2;46992:61;;;47024:17;:15;:17::i;:::-;47063:23;47104:10;;47089:12;:25;:53;;47132:10;;47089:53;;;47117:12;47089:53;47171:15;::::0;47063:79;;-1:-1:-1;47171:32:0::2;::::0;47191:11;47171:19:::2;:32::i;:::-;47153:15;:50:::0;-1:-1:-1;;;;;47214:23:0;;::::2;;::::0;;;:13:::2;:23;::::0;;;;;;;:30;;47240:4:::2;-1:-1:-1::0;;47214:30:0;;::::2;::::0;::::2;::::0;;;47269:160;;::::2;::::0;::::2;::::0;;;;;;;::::2;::::0;;;;;;;;;;;;;;47255:8:::2;:175:::0;;;;::::2;::::0;;;;;;;;::::2;::::0;;::::2;::::0;;::::2;::::0;;-1:-1:-1;;;;;;47255:175:0::2;::::0;;;::::2;;::::0;;;;;;;;;;;;;;-1:-1:-1;;47255:175:0;;;;;;46871:567::o;50952:775::-;33993:1;34599:7;;:19;;34591:63;;;;;-1:-1:-1;;;34591:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;33993:1;34732:7;:18;46741:8:::1;:15:::0;51032:4;;46735:21;::::1;46727:49;;;::::0;;-1:-1:-1;;;46727:49:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;46727:49:0;;;;;;;;;;;;;::::1;;51049:21:::2;51073:8;51082:4;51073:14;;;;;;;;;::::0;;;::::2;::::0;;;51122;;;:8:::2;:14:::0;;;;;;51137:10:::2;51122:26:::0;;;;;;;51167:11;;51073:14:::2;::::0;;::::2;::::0;;::::2;::::0;-1:-1:-1;51167:22:0;-1:-1:-1;51167:22:0::2;51159:53;;;::::0;;-1:-1:-1;;;51159:53:0;;::::2;;::::0;::::2;::::0;::::2;::::0;;;;-1:-1:-1;;;51159:53:0;;;;;;;;;;;;;::::2;;51223:16;51234:4;51223:10;:16::i;:::-;51250:15;51268:69;51321:4;:15;;;51268:48;51311:4;51268:38;51284:4;:21;;;51268:4;:11;;;:15;;:38;;;;:::i;:69::-;51250:87:::0;-1:-1:-1;51352:11:0;;51348:82:::2;;51380:38;51398:10;51410:7;51380:17;:38::i;:::-;51444:11:::0;;51440:152:::2;;51486:11:::0;;:24:::2;::::0;51502:7;51486:15:::2;:24::i;:::-;51472:38:::0;;51525:12;;:55:::2;::::0;-1:-1:-1;;;;;51525:12:0::2;51559:10;51572:7:::0;51525:25:::2;:55::i;:::-;51636:21;::::0;::::2;::::0;51620:11;;:48:::2;::::0;51663:4:::2;::::0;51620:38:::2;::::0;:15:::2;:38::i;:48::-;51602:15;::::0;::::2;:66:::0;51684:35:::2;::::0;;;;;;;51705:4;;51693:10:::2;::::0;51684:35:::2;::::0;;;;::::2;::::0;;::::2;-1:-1:-1::0;;33949:1:0;34911:22;;-1:-1:-1;;;;50952:775:0:o;45670:25::-;;;;:::o;49225:818::-;49277:21;49301:8;49310:4;49301:14;;;;;;;;;;;;;;;;;;49277:38;;49346:4;:20;;;49330:12;:36;49326:75;;49383:7;;;49326:75;49430:12;;:37;;;-1:-1:-1;;;49430:37:0;;49461:4;49430:37;;;;;;49411:16;;-1:-1:-1;;;;;49430:12:0;;:22;;:37;;;;;;;;;;;;;;:12;:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;49430:37:0;;-1:-1:-1;49482:13:0;;;:37;;-1:-1:-1;49499:15:0;;;;:20;49482:37;49478:126;;;-1:-1:-1;49559:12:0;49536:20;;;;:35;49586:7;;49478:126;49614:18;49635:49;49649:4;:20;;;49671:12;49635:13;:49::i;:::-;49614:70;;49695:19;49717:71;49772:15;;49717:50;49751:4;:15;;;49717:29;49732:13;;49717:10;:14;;:29;;;;:::i;:71::-;49799:5;;49810:7;;49695:93;;-1:-1:-1;;;;;;49799:5:0;;;;:10;;49810:7;49819:19;49695:93;49835:2;49819:15;:19::i;:::-;49799:40;;;;;;;;;;;;;-1:-1:-1;;;;;49799:40:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;49850:5:0;;49869:8;;49850:42;;;-1:-1:-1;;;49850:42:0;;-1:-1:-1;;;;;49869:8:0;;;49850:42;;;;;;;;;;;;:5;;;;;-1:-1:-1;49850:10:0;;-1:-1:-1;49850:42:0;;;;;:5;;:42;;;;;;;:5;;:42;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49927:62;49953:35;49979:8;49953:21;49969:4;49953:11;:15;;:21;;;;:::i;:35::-;49927:21;;;;;:25;:62::i;:::-;49903:21;;;:86;-1:-1:-1;;50023:12:0;50000:20;;;;:35;;;;-1:-1:-1;49225:818:0;;:::o;51798:415::-;33993:1;34599:7;;:19;;34591:63;;;;;-1:-1:-1;;;34591:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;33993:1;34732:7;:18;46741:8:::1;:15:::0;51870:4;;46735:21;::::1;46727:49;;;::::0;;-1:-1:-1;;;46727:49:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;46727:49:0;;;;;;;;;;;;;::::1;;51887:21:::2;51911:8;51920:4;51911:14;;;;;;;;;::::0;;;::::2;::::0;;;51960;;;:8:::2;:14:::0;;;;;;51975:10:::2;51960:26:::0;;;;;;;52014:11;;52036:15;;;-1:-1:-1;52062:15:0;::::2;:19:::0;;;;51911:14:::2;::::0;;::::2;;52092:12:::0;;51911:14;;-1:-1:-1;51960:26:0;;52014:11;52092:54:::2;::::0;-1:-1:-1;;;;;52092:12:0;;;::::2;::::0;52014:11;52092:25:::2;:54::i;:::-;52162:43;::::0;;;;;;;52192:4;;52180:10:::2;::::0;52162:43:::2;::::0;;;;::::2;::::0;;::::2;-1:-1:-1::0;;33949:1:0;34911:22;;-1:-1:-1;;;51798:415:0:o;48969:180::-;49031:8;:15;49014:14;49057:85;49085:6;49079:3;:12;49057:85;;;49115:15;49126:3;49115:10;:15::i;:::-;49093:5;;49057:85;;;;48969:180;:::o;47535:321::-;2325:12;:10;:12::i;:::-;2315:6;;-1:-1:-1;;;;;2315:6:0;;;:22;;;2307:67;;;;;-1:-1:-1;;;2307:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2307:67:0;;;;;;;;;;;;;;;46741:8:::1;:15:::0;47629:4;;46735:21;::::1;46727:49;;;::::0;;-1:-1:-1;;;46727:49:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;46727:49:0;;;;;;;;;;;;;::::1;;47650:11:::2;47646:61;;;47678:17;:15;:17::i;:::-;47735:63;47786:11;47735:46;47755:8;47764:4;47755:14;;;;;;;;;;;;;;;;;;:25;;;47735:15;;:19;;:46;;;;:::i;:::-;:50:::0;::::2;:63::i;:::-;47717:15;:81;;;;47837:11;47809:8;47818:4;47809:14;;;;;;;;;;;;;;;;;;:25;;:39;;;;2385:1:::1;47535:321:::0;;;:::o;2745:148::-;2325:12;:10;:12::i;:::-;2315:6;;-1:-1:-1;;;;;2315:6:0;;;:22;;;2307:67;;;;;-1:-1:-1;;;2307:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2307:67:0;;;;;;;;;;;;;;;2852:1:::1;2836:6:::0;;2815:40:::1;::::0;-1:-1:-1;;;;;2836:6:0;;::::1;::::0;2815:40:::1;::::0;2852:1;;2815:40:::1;2883:1;2866:19:::0;;-1:-1:-1;;;;;;2866:19:0::1;::::0;;2745:148::o;52510:180::-;52581:7;;-1:-1:-1;;;;;52581:7:0;52567:10;:21;52559:43;;;;;-1:-1:-1;;;52559:43:0;;;;;;;;;;;;-1:-1:-1;;;52559:43:0;;;;;;;;;;;;;;;52613:7;:18;;-1:-1:-1;;;;;;52613:18:0;-1:-1:-1;;;;;52613:18:0;;;;;;;;52647:35;;52661:10;;52647:35;;-1:-1:-1;;52647:35:0;52510:180;:::o;2103:79::-;2141:7;2168:6;-1:-1:-1;;;;;2168:6:0;2103:79;:::o;47932:121::-;48004:7;48031:14;:3;48039:5;48031:7;:14::i;:::-;48024:21;47932:121;-1:-1:-1;;;47932:121:0:o;45558:64::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;45398:23::-;;;-1:-1:-1;;;;;45398:23:0;;:::o;45428:24::-;;;-1:-1:-1;;;;;45428:24:0;;:::o;45488:28::-;;;;:::o;46483:44::-;;;;;;;;;;;;;;;:::o;45459:22::-;;;-1:-1:-1;;;;;45459:22:0;;:::o;50113:787::-;33993:1;34599:7;;:19;;34591:63;;;;;-1:-1:-1;;;34591:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;33993:1;34732:7;:18;46741:8:::1;:15:::0;50192:4;;46735:21;::::1;46727:49;;;::::0;;-1:-1:-1;;;46727:49:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;46727:49:0;;;;;;;;;;;;;::::1;;50209:21:::2;50233:8;50242:4;50233:14;;;;;;;;;::::0;;;::::2;::::0;;;50282;;;:8:::2;:14:::0;;;;;;50297:10:::2;50282:26:::0;;;;;;;50233:14:::2;::::0;;::::2;::::0;;::::2;::::0;-1:-1:-1;50319:16:0::2;50291:4:::0;50319:10:::2;:16::i;:::-;50350:11:::0;;:15;50346:239:::2;;50382:15;50400:69;50453:4;:15;;;50400:48;50443:4;50400:38;50416:4;:21;;;50400:4;:11;;;:15;;:38;;;;:::i;:69::-;50382:87:::0;-1:-1:-1;50488:11:0;;50484:90:::2;;50520:38;50538:10;50550:7;50520:17;:38::i;:::-;50346:239;;50599:11:::0;;50595:171:::2;;50627:12:::0;;:74:::2;::::0;-1:-1:-1;;;;;50627:12:0::2;50665:10;50686:4;50693:7:::0;50627:29:::2;:74::i;:::-;50730:11:::0;;:24:::2;::::0;50746:7;50730:15:::2;:24::i;:::-;50716:38:::0;;50595:171:::2;50810:21;::::0;::::2;::::0;50794:11;;:48:::2;::::0;50837:4:::2;::::0;50794:38:::2;::::0;:15:::2;:38::i;:48::-;50776:15;::::0;::::2;:66:::0;50858:34:::2;::::0;;;;;;;50878:4;;50866:10:::2;::::0;50858:34:::2;::::0;;;;::::2;::::0;;::::2;-1:-1:-1::0;;33949:1:0;34911:22;;-1:-1:-1;;;50113:787:0:o;3048:244::-;2325:12;:10;:12::i;:::-;2315:6;;-1:-1:-1;;;;;2315:6:0;;;:22;;;2307:67;;;;;-1:-1:-1;;;2307:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2307:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;3137:22:0;::::1;3129:73;;;;-1:-1:-1::0;;;3129:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3239:6;::::0;;3218:38:::1;::::0;-1:-1:-1;;;;;3218:38:0;;::::1;::::0;3239:6;::::1;::::0;3218:38:::1;::::0;::::1;3267:6;:17:::0;;-1:-1:-1;;;;;;3267:17:0::1;-1:-1:-1::0;;;;;3267:17:0;;;::::1;::::0;;;::::1;::::0;;3048:244::o;8377:471::-;8435:7;8680:6;8676:47;;-1:-1:-1;8710:1:0;8703:8;;8676:47;8747:5;;;8751:1;8747;:5;:1;8771:5;;;;;:10;8763:56;;;;-1:-1:-1;;;8763:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;9324:132;9382:7;9409:39;9413:1;9416;9409:39;;;;;;;;;;;;;;;;;:3;:39::i;7023:181::-;7081:7;7113:5;;;7137:6;;;;7129:46;;;;;-1:-1:-1;;;7129:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;7487:136;7545:7;7572:43;7576:1;7579;7572:43;;;;;;;;;;;;;;;;;:3;:43::i;657:106::-;745:10;657:106;:::o;52329:125::-;52406:8;;:40;;;-1:-1:-1;;;52406:40:0;;-1:-1:-1;;;;;52406:40:0;;;;;;;;;;;;;;;:8;;;;;:26;;:40;;;;;:8;;:40;;;;;;;:8;;:40;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;52329:125;;:::o;29187:177::-;29297:58;;;-1:-1:-1;;;;;29297:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;29297:58:0;-1:-1:-1;;;29297:58:0;;;29270:86;;29290:5;;29270:19;:86::i;:::-;29187:177;;;:::o;29372:205::-;29500:68;;;-1:-1:-1;;;;;29500:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;29500:68:0;-1:-1:-1;;;29500:68:0;;;29473:96;;29493:5;;29473:19;:96::i;:::-;29372:205;;;;:::o;9952:278::-;10038:7;10073:12;10066:5;10058:28;;;;-1:-1:-1;;;10058:28:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;10097:9;10113:1;10109;:5;;;;;;;9952:278;-1:-1:-1;;;;;9952:278:0:o;7926:192::-;8012:7;8048:12;8040:6;;;;8032:29;;;;-1:-1:-1;;;8032:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;8084:5:0;;;7926:192::o;31492:761::-;31916:23;31942:69;31970:4;31942:69;;;;;;;;;;;;;;;;;31950:5;-1:-1:-1;;;;;31942:27:0;;;:69;;;;;:::i;:::-;32026:17;;31916:95;;-1:-1:-1;32026:21:0;32022:224;;32168:10;32157:30;;;;;;;;;;;;;;;-1:-1:-1;32157:30:0;32149:85;;;;-1:-1:-1;;;32149:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15165:196;15268:12;15300:53;15323:6;15331:4;15337:1;15340:12;15300:22;:53::i;:::-;15293:60;15165:196;-1:-1:-1;;;;15165:196:0:o;16542:979::-;16672:12;16705:18;16716:6;16705:10;:18::i;:::-;16697:60;;;;;-1:-1:-1;;;16697:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;16831:12;16845:23;16872:6;-1:-1:-1;;;;;16872:11:0;16892:8;16903:4;16872:36;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;16872:36:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;16830:78;;;;16923:7;16919:595;;;16954:10;-1:-1:-1;16947:17:0;;-1:-1:-1;16947:17:0;16919:595;17068:17;;:21;17064:439;;17331:10;17325:17;17392:15;17379:10;17375:2;17371:19;17364:44;17279:148;17467:20;;-1:-1:-1;;;17467:20:0;;;;;;;;;;;;;;;;;17474:12;;17467:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;12247:422;12614:20;12653:8;;;12247:422::o

ipfs://6f7f31363437a9ecbbef05c3eb2c0e5a04de9534a1e7e3577ff84e0abf0e9cf4