Contract 0xEF7AAdb5459a2Ef4E687d3b2483cB48cEf6F2aCD

/**
 *Submitted for verification at polygonscan.com on 2023-01-03
*/

// File: EnvoyNew/Polygon/IVoyBridge.sol


pragma solidity ^0.8.0;

interface IVoyBridge {
    function initiateSwap(address _user, uint256 _amount) external;
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/utils/introspection/ERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;


/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// File: @openzeppelin/contracts/utils/math/Math.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// File: @openzeppelin/contracts/utils/Strings.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;


/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// File: @openzeppelin/contracts/access/IAccessControl.sol


// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/AccessControl.sol


// OpenZeppelin Contracts (last updated v4.8.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;





/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// File: @openzeppelin/contracts/security/Pausable.sol


// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// File: EnvoyNew/Polygon/XDCBridge.sol


pragma solidity ^0.8.0;






contract XDCBridge is IVoyBridge, Pausable, AccessControl {
    address public voyToken;

    bytes32 public constant OPERATOR_ROLE = keccak256("OPERATOR_ROLE");

    event SwapStarted(address _user, uint256 _amount);
    event SwapReturned(address _user, uint256 _amount, string _xcdTxHash);

    constructor(address _voyToken) {
        _grantRole(DEFAULT_ADMIN_ROLE, msg.sender);
        _grantRole(OPERATOR_ROLE, msg.sender);

       voyToken = _voyToken;
    }

    function initiateSwap(address _user, uint256 _amount) external override whenNotPaused {
        require(msg.sender == voyToken, "Invalid caller");

        ERC20(voyToken).transferFrom(_user, address(this), _amount);
        emit SwapStarted(_user, _amount);
    }

    function returnSwap(address _user, uint256 _amount, string memory _xdcTxHash) external onlyRole(OPERATOR_ROLE) whenNotPaused {
        ERC20(voyToken).transfer(_user, _amount);
        emit SwapReturned(_user, _amount, _xdcTxHash);
    }

    function pause() external onlyRole(DEFAULT_ADMIN_ROLE) {
        _pause();
    }

    function unpause() external onlyRole(DEFAULT_ADMIN_ROLE) {
        _unpause();
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_voyToken","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_user","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"},{"indexed":false,"internalType":"string","name":"_xcdTxHash","type":"string"}],"name":"SwapReturned","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_user","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"SwapStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OPERATOR_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_user","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"initiateSwap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_user","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"string","name":"_xdcTxHash","type":"string"}],"name":"returnSwap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"voyToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000823bbb870b0eb86bd7ec0bcc98c84b46a0f99ac7

-----Decoded View---------------
Arg [0] : _voyToken (address): 0x823bbb870b0eb86bd7ec0bcc98c84b46a0f99ac7

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000823bbb870b0eb86bd7ec0bcc98c84b46a0f99ac7

49177:1190:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23825:204;;;;;;:::i;:::-;;:::i;:::-;;;5016:14:1;;5009:22;4991:41;;4979:2;4964:18;23825:204:0;;;;;;;;25648:131;;;;;;:::i;:::-;25722:7;25749:12;;;:6;:12;;;;;;;;:22;;;25648:131;;;;5189:25:1;;;5177:2;5162:18;25648:131:0;5043:177:1;26089:147:0;;;;;;:::i;:::-;;:::i;:::-;;27233:218;;;;;;:::i;:::-;;:::i;49663:269::-;;;;;;:::i;:::-;;:::i;50278:86::-;;;:::i;31167:::-;31214:4;31238:7;;;31167:86;;50188:82;;;:::i;49242:23::-;;;;;-1:-1:-1;;;;;49242:23:0;;;;;;-1:-1:-1;;;;;3755:32:1;;;3737:51;;3725:2;3710:18;49242:23:0;3591:203:1;24121:147:0;;;;;;:::i;:::-;;:::i;23226:49::-;;23271:4;23226:49;;49940:240;;;;;;:::i;:::-;;:::i;26529:149::-;;;;;;:::i;:::-;;:::i;49274:66::-;;49314:26;49274:66;;23825:204;23910:4;-1:-1:-1;;;;;;23934:47:0;;-1:-1:-1;;;23934:47:0;;:87;;-1:-1:-1;;;;;;;;;;2060:40:0;;;23985:36;23927:94;23825:204;-1:-1:-1;;23825:204:0:o;26089:147::-;25722:7;25749:12;;;:6;:12;;;;;;;;:22;;23717:16;23728:4;23717:10;:16::i;:::-;26203:25:::1;26214:4;26220:7;26203:10;:25::i;:::-;26089:147:::0;;;:::o;27233:218::-;-1:-1:-1;;;;;27329:23:0;;21114:10;27329:23;27321:83;;;;-1:-1:-1;;;27321:83:0;;7050:2:1;27321:83:0;;;7032:21:1;7089:2;7069:18;;;7062:30;7128:34;7108:18;;;7101:62;-1:-1:-1;;;7179:18:1;;;7172:45;7234:19;;27321:83:0;;;;;;;;;27417:26;27429:4;27435:7;27417:11;:26::i;:::-;27233:218;;:::o;49663:269::-;30772:19;:17;:19::i;:::-;49782:8:::1;::::0;-1:-1:-1;;;;;49782:8:0::1;49768:10;:22;49760:49;;;::::0;-1:-1:-1;;;49760:49:0;;6362:2:1;49760:49:0::1;::::0;::::1;6344:21:1::0;6401:2;6381:18;;;6374:30;-1:-1:-1;;;6420:18:1;;;6413:44;6474:18;;49760:49:0::1;6160:338:1::0;49760:49:0::1;49828:8;::::0;49822:59:::1;::::0;-1:-1:-1;;;49822:59:0;;-1:-1:-1;;;;;4057:15:1;;;49822:59:0::1;::::0;::::1;4039:34:1::0;49866:4:0::1;4089:18:1::0;;;4082:43;4141:18;;;4134:34;;;49828:8:0;;::::1;::::0;49822:28:::1;::::0;3974:18:1;;49822:59:0::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;49897:27:0::1;::::0;;-1:-1:-1;;;;;4371:32:1;;4353:51;;4435:2;4420:18;;4413:34;;;49897:27:0::1;::::0;4326:18:1;49897:27:0::1;;;;;;;49663:269:::0;;:::o;50278:86::-;23271:4;23717:16;23271:4;23717:10;:16::i;:::-;50346:10:::1;:8;:10::i;:::-;50278:86:::0;:::o;50188:82::-;23271:4;23717:16;23271:4;23717:10;:16::i;:::-;50254:8:::1;:6;:8::i;24121:147::-:0;24207:4;24231:12;;;:6;:12;;;;;;;;-1:-1:-1;;;;;24231:29:0;;;;;;;;;;;;;;;24121:147::o;49940:240::-;49314:26;23717:16;23728:4;23717:10;:16::i;:::-;30772:19:::1;:17;:19::i;:::-;50082:8:::2;::::0;50076:40:::2;::::0;-1:-1:-1;;;50076:40:0;;-1:-1:-1;;;;;4371:32:1;;;50076:40:0::2;::::0;::::2;4353:51:1::0;4420:18;;;4413:34;;;50082:8:0;;::::2;::::0;50076:24:::2;::::0;4326:18:1;;50076:40:0::2;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;50132;50145:5;50152:7;50161:10;50132:40;;;;;;;;:::i;:::-;;;;;;;;49940:240:::0;;;;:::o;26529:149::-;25722:7;25749:12;;;:6;:12;;;;;;;;:22;;23717:16;23728:4;23717:10;:16::i;:::-;26644:26:::1;26656:4;26662:7;26644:11;:26::i;24572:105::-:0;24639:30;24650:4;21114:10;24639;:30::i;28830:238::-;28914:22;28922:4;28928:7;28914;:22::i;:::-;28909:152;;28953:12;;;;28985:4;28953:12;;;;;;;;-1:-1:-1;;;;;28953:29:0;;;;;;;;;;:36;;-1:-1:-1;;28953:36:0;;;;;;;29009:40;;21114:10;;28953:12;;29009:40;;28953:12;29009:40;28830:238;;:::o;29248:239::-;29332:22;29340:4;29346:7;29332;:22::i;:::-;29328:152;;;29403:5;29371:12;;;:6;:12;;;;;;;;-1:-1:-1;;;;;29371:29:0;;;;;;;;;;:37;;-1:-1:-1;;29371:37:0;;;29428:40;21114:10;;29371:12;;29428:40;;29403:5;29428:40;29248:239;;:::o;31326:108::-;31214:4;31238:7;;;31396:9;31388:38;;;;-1:-1:-1;;;31388:38:0;;6705:2:1;31388:38:0;;;6687:21:1;6744:2;6724:18;;;6717:30;-1:-1:-1;;;6763:18:1;;;6756:46;6819:18;;31388:38:0;6503:340:1;31388:38:0;31326:108::o;32022:120::-;31031:16;:14;:16::i;:::-;32091:5:::1;32081:15:::0;;-1:-1:-1;;32081:15:0::1;::::0;;32112:22:::1;21114:10:::0;32121:12:::1;32112:22;::::0;-1:-1:-1;;;;;3755:32:1;;;3737:51;;3725:2;3710:18;32112:22:0::1;;;;;;;32022:120::o:0;31763:118::-;30772:19;:17;:19::i;:::-;31823:7:::1;:14:::0;;-1:-1:-1;;31823:14:0::1;31833:4;31823:14;::::0;;31853:20:::1;31860:12;21114:10:::0;;21034:98;24967:492;25056:22;25064:4;25070:7;25056;:22::i;:::-;25051:401;;25244:28;25264:7;25244:19;:28::i;:::-;25345:38;25373:4;25380:2;25345:19;:38::i;:::-;25149:257;;;;;;;;;:::i;:::-;;;;-1:-1:-1;;25149:257:0;;;;;;;;;;-1:-1:-1;;;25095:345:0;;;;;;;:::i;31511:108::-;31214:4;31238:7;;;31570:41;;;;-1:-1:-1;;;31570:41:0;;6013:2:1;31570:41:0;;;5995:21:1;6052:2;6032:18;;;6025:30;-1:-1:-1;;;6071:18:1;;;6064:50;6131:18;;31570:41:0;5811:344:1;17156:151:0;17214:13;17247:52;-1:-1:-1;;;;;17259:22:0;;15311:2;16552:447;16627:13;16653:19;16685:10;16689:6;16685:1;:10;:::i;:::-;:14;;16698:1;16685:14;:::i;:::-;16675:25;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;16675:25:0;;16653:47;;-1:-1:-1;;;16711:6:0;16718:1;16711:9;;;;;;;;:::i;:::-;;;;:15;-1:-1:-1;;;;;16711:15:0;;;;;;;;;-1:-1:-1;;;16737:6:0;16744:1;16737:9;;;;;;;;:::i;:::-;;;;:15;-1:-1:-1;;;;;16737:15:0;;;;;;;;-1:-1:-1;16768:9:0;16780:10;16784:6;16780:1;:10;:::i;:::-;:14;;16793:1;16780:14;:::i;:::-;16768:26;;16763:131;16800:1;16796;:5;16763:131;;;-1:-1:-1;;;16844:5:0;16852:3;16844:11;16835:21;;;;;;;:::i;:::-;;;;16823:6;16830:1;16823:9;;;;;;;;:::i;:::-;;;;:33;-1:-1:-1;;;;;16823:33:0;;;;;;;;-1:-1:-1;16881:1:0;16871:11;;;;;16803:3;;;:::i;:::-;;;16763:131;;;-1:-1:-1;16912:10:0;;16904:55;;;;-1:-1:-1;;;16904:55:0;;5652:2:1;16904:55:0;;;5634:21:1;;;5671:18;;;5664:30;5730:34;5710:18;;;5703:62;5782:18;;16904:55:0;5450:356:1;16904:55:0;16984:6;16552:447;-1:-1:-1;;;16552:447:0:o;14:173:1:-;82:20;;-1:-1:-1;;;;;131:31:1;;121:42;;111:70;;177:1;174;167:12;111:70;14:173;;;:::o;192:254::-;260:6;268;321:2;309:9;300:7;296:23;292:32;289:52;;;337:1;334;327:12;289:52;360:29;379:9;360:29;:::i;:::-;350:39;436:2;421:18;;;;408:32;;-1:-1:-1;;;192:254:1:o;451:1064::-;538:6;546;554;607:2;595:9;586:7;582:23;578:32;575:52;;;623:1;620;613:12;575:52;646:29;665:9;646:29;:::i;:::-;636:39;;722:2;711:9;707:18;694:32;684:42;;777:2;766:9;762:18;749:32;800:18;841:2;833:6;830:14;827:34;;;857:1;854;847:12;827:34;895:6;884:9;880:22;870:32;;940:7;933:4;929:2;925:13;921:27;911:55;;962:1;959;952:12;911:55;998:2;985:16;1020:2;1016;1013:10;1010:36;;;1026:18;;:::i;:::-;1101:2;1095:9;1069:2;1155:13;;-1:-1:-1;;1151:22:1;;;1175:2;1147:31;1143:40;1131:53;;;1199:18;;;1219:22;;;1196:46;1193:72;;;1245:18;;:::i;:::-;1285:10;1281:2;1274:22;1320:2;1312:6;1305:18;1360:7;1355:2;1350;1346;1342:11;1338:20;1335:33;1332:53;;;1381:1;1378;1371:12;1332:53;1437:2;1432;1428;1424:11;1419:2;1411:6;1407:15;1394:46;1482:1;1477:2;1472;1464:6;1460:15;1456:24;1449:35;1503:6;1493:16;;;;;;;451:1064;;;;;:::o;1520:277::-;1587:6;1640:2;1628:9;1619:7;1615:23;1611:32;1608:52;;;1656:1;1653;1646:12;1608:52;1688:9;1682:16;1741:5;1734:13;1727:21;1720:5;1717:32;1707:60;;1763:1;1760;1753:12;1802:180;1861:6;1914:2;1902:9;1893:7;1889:23;1885:32;1882:52;;;1930:1;1927;1920:12;1882:52;-1:-1:-1;1953:23:1;;1802:180;-1:-1:-1;1802:180:1:o;1987:254::-;2055:6;2063;2116:2;2104:9;2095:7;2091:23;2087:32;2084:52;;;2132:1;2129;2122:12;2084:52;2168:9;2155:23;2145:33;;2197:38;2231:2;2220:9;2216:18;2197:38;:::i;:::-;2187:48;;1987:254;;;;;:::o;2246:286::-;2304:6;2357:2;2345:9;2336:7;2332:23;2328:32;2325:52;;;2373:1;2370;2363:12;2325:52;2399:23;;-1:-1:-1;;;;;;2451:32:1;;2441:43;;2431:71;;2498:1;2495;2488:12;2537:258;2579:3;2617:5;2611:12;2644:6;2639:3;2632:19;2660:63;2716:6;2709:4;2704:3;2700:14;2693:4;2686:5;2682:16;2660:63;:::i;:::-;2777:2;2756:15;-1:-1:-1;;2752:29:1;2743:39;;;;2784:4;2739:50;;2537:258;-1:-1:-1;;2537:258:1:o;2800:786::-;3211:25;3206:3;3199:38;3181:3;3266:6;3260:13;3282:62;3337:6;3332:2;3327:3;3323:12;3316:4;3308:6;3304:17;3282:62;:::i;:::-;-1:-1:-1;;;3403:2:1;3363:16;;;3395:11;;;3388:40;3453:13;;3475:63;3453:13;3524:2;3516:11;;3509:4;3497:17;;3475:63;:::i;:::-;3558:17;3577:2;3554:26;;2800:786;-1:-1:-1;;;;2800:786:1:o;4458:388::-;4692:1;4688;4683:3;4679:11;4675:19;4667:6;4663:32;4652:9;4645:51;4732:6;4727:2;4716:9;4712:18;4705:34;4775:2;4770;4759:9;4755:18;4748:30;4626:4;4795:45;4836:2;4825:9;4821:18;4813:6;4795:45;:::i;:::-;4787:53;4458:388;-1:-1:-1;;;;;4458:388:1:o;5225:220::-;5374:2;5363:9;5356:21;5337:4;5394:45;5435:2;5424:9;5420:18;5412:6;5394:45;:::i;7264:128::-;7304:3;7335:1;7331:6;7328:1;7325:13;7322:39;;;7341:18;;:::i;:::-;-1:-1:-1;7377:9:1;;7264:128::o;7397:168::-;7437:7;7503:1;7499;7495:6;7491:14;7488:1;7485:21;7480:1;7473:9;7466:17;7462:45;7459:71;;;7510:18;;:::i;:::-;-1:-1:-1;7550:9:1;;7397:168::o;7570:258::-;7642:1;7652:113;7666:6;7663:1;7660:13;7652:113;;;7742:11;;;7736:18;7723:11;;;7716:39;7688:2;7681:10;7652:113;;;7783:6;7780:1;7777:13;7774:48;;;7818:1;7809:6;7804:3;7800:16;7793:27;7774:48;;7570:258;;;:::o;7833:136::-;7872:3;7900:5;7890:39;;7909:18;;:::i;:::-;-1:-1:-1;;;7945:18:1;;7833:136::o;7974:127::-;8035:10;8030:3;8026:20;8023:1;8016:31;8066:4;8063:1;8056:15;8090:4;8087:1;8080:15;8106:127;8167:10;8162:3;8158:20;8155:1;8148:31;8198:4;8195:1;8188:15;8222:4;8219:1;8212:15;8238:127;8299:10;8294:3;8290:20;8287:1;8280:31;8330:4;8327:1;8320:15;8354:4;8351:1;8344:15

ipfs://1ae9b22382425b239864cf54b1f62227041404001d416f5bff3ffc09ef3833c0