Contract 0x825a687f89EEF9E4e5301CD3180F468E1a701d1e 11

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { LibAsset, IERC20 } from "../Libraries/LibAsset.sol";
import { ILiFi } from "../Interfaces/ILiFi.sol";
import { ICBridge } from "../Interfaces/ICBridge.sol";
import { LibDiamond } from "../Libraries/LibDiamond.sol";
import { ReentrancyGuard } from "../Helpers/ReentrancyGuard.sol";
import { InvalidAmount, CannotBridgeToSameNetwork, NativeValueWithERC, InvalidConfig } from "../Errors/GenericErrors.sol";
import { SwapperV2, LibSwap } from "../Helpers/SwapperV2.sol";

/// @title CBridge Facet
/// @author LI.FI (https://li.fi)
/// @notice Provides functionality for bridging through CBridge
contract CBridgeFacet is ILiFi, SwapperV2, ReentrancyGuard {
    /// Storage ///

    bytes32 internal constant NAMESPACE = hex"86b79a219228d788dd4fea892f48eec79167ea6d19d7f61e274652b2797c5b12"; //keccak256("com.lifi.facets.cbridge2");
    struct Storage {
        address cBridge;
        uint64 cBridgeChainId;
    }

    /// Types ///

    struct CBridgeData {
        uint32 maxSlippage;
        uint64 dstChainId;
        uint64 nonce;
        uint256 amount;
        address receiver;
        address token;
    }

    /// Events ///

    event CBridgeInitialized(address cBridge, uint256 chainId);

    /// Init ///

    /// @notice Initializes local variables for the CBridge facet
    /// @param _cBridge address of the canonical CBridge router contract
    /// @param _chainId chainId of this deployed contract
    function initCbridge(address _cBridge, uint64 _chainId) external {
        LibDiamond.enforceIsContractOwner();
        if (_cBridge == address(0)) revert InvalidConfig();
        Storage storage s = getStorage();
        s.cBridge = _cBridge;
        s.cBridgeChainId = _chainId;
        emit CBridgeInitialized(_cBridge, _chainId);
    }

    /// External Methods ///

    /// @notice Bridges tokens via CBridge
    /// @param _lifiData data used purely for tracking and analytics
    /// @param _cBridgeData data specific to CBridge
    function startBridgeTokensViaCBridge(LiFiData calldata _lifiData, CBridgeData calldata _cBridgeData)
        external
        payable
        nonReentrant
    {
        LibAsset.depositAsset(_cBridgeData.token, _cBridgeData.amount);
        _startBridge(_cBridgeData);

        emit LiFiTransferStarted(
            _lifiData.transactionId,
            "cbridge",
            "",
            _lifiData.integrator,
            _lifiData.referrer,
            _cBridgeData.token,
            _lifiData.receivingAssetId,
            _cBridgeData.receiver,
            _cBridgeData.amount,
            _cBridgeData.dstChainId,
            false,
            false
        );
    }

    /// @notice Performs a swap before bridging via CBridge
    /// @param _lifiData data used purely for tracking and analytics
    /// @param _swapData an array of swap related data for performing swaps before bridging
    /// @param _cBridgeData data specific to CBridge
    function swapAndStartBridgeTokensViaCBridge(
        LiFiData calldata _lifiData,
        LibSwap.SwapData[] calldata _swapData,
        CBridgeData memory _cBridgeData
    ) external payable nonReentrant {
        _cBridgeData.amount = _executeAndCheckSwaps(_lifiData, _swapData, payable(msg.sender));
        _startBridge(_cBridgeData);

        emit LiFiTransferStarted(
            _lifiData.transactionId,
            "cbridge",
            "",
            _lifiData.integrator,
            _lifiData.referrer,
            _swapData[0].sendingAssetId,
            _lifiData.receivingAssetId,
            _cBridgeData.receiver,
            _swapData[0].fromAmount,
            _cBridgeData.dstChainId,
            true,
            false
        );
    }

    /// Private Methods ///

    /// @dev Conatains the business logic for the bridge via CBridge
    /// @param _cBridgeData data specific to CBridge
    function _startBridge(CBridgeData memory _cBridgeData) private {
        Storage storage s = getStorage();
        address bridge = s.cBridge;

        // Do CBridge stuff
        if (s.cBridgeChainId == _cBridgeData.dstChainId) revert CannotBridgeToSameNetwork();

        if (LibAsset.isNativeAsset(_cBridgeData.token)) {
            ICBridge(bridge).sendNative{ value: _cBridgeData.amount }(
                _cBridgeData.receiver,
                _cBridgeData.amount,
                _cBridgeData.dstChainId,
                _cBridgeData.nonce,
                _cBridgeData.maxSlippage
            );
        } else {
            // Give CBridge approval to bridge tokens
            LibAsset.maxApproveERC20(IERC20(_cBridgeData.token), bridge, _cBridgeData.amount);
            // solhint-disable check-send-result
            ICBridge(bridge).send(
                _cBridgeData.receiver,
                _cBridgeData.token,
                _cBridgeData.amount,
                _cBridgeData.dstChainId,
                _cBridgeData.nonce,
                _cBridgeData.maxSlippage
            );
        }
    }

    /// @dev fetch local storage
    function getStorage() private pure returns (Storage storage s) {
        bytes32 namespace = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            s.slot := namespace
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;
import { NullAddrIsNotAnERC20Token, NullAddrIsNotAValidSpender, NoTransferToNullAddress, InvalidAmount, NativeValueWithERC, NativeAssetTransferFailed } from "../Errors/GenericErrors.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/// @title LibAsset
/// @author Connext <[email protected]>
/// @notice This library contains helpers for dealing with onchain transfers
///         of assets, including accounting for the native asset `assetId`
///         conventions and any noncompliant ERC20 transfers
library LibAsset {
    uint256 private constant MAX_INT = type(uint256).max;

    address internal constant NULL_ADDRESS = 0x0000000000000000000000000000000000000000; //address(0)

    /// @dev All native assets use the empty address for their asset id
    ///      by convention

    address internal constant NATIVE_ASSETID = NULL_ADDRESS; //address(0)

    /// @notice Gets the balance of the inheriting contract for the given asset
    /// @param assetId The asset identifier to get the balance of
    /// @return Balance held by contracts using this library
    function getOwnBalance(address assetId) internal view returns (uint256) {
        return assetId == NATIVE_ASSETID ? address(this).balance : IERC20(assetId).balanceOf(address(this));
    }

    /// @notice Transfers ether from the inheriting contract to a given
    ///         recipient
    /// @param recipient Address to send ether to
    /// @param amount Amount to send to given recipient
    function transferNativeAsset(address payable recipient, uint256 amount) private {
        if (recipient == NULL_ADDRESS) revert NoTransferToNullAddress();
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = recipient.call{ value: amount }("");
        if (!success) revert NativeAssetTransferFailed();
    }

    /// @notice Gives MAX approval for another address to spend tokens
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param amount Amount to approve for spending
    function maxApproveERC20(
        IERC20 assetId,
        address spender,
        uint256 amount
    ) internal {
        if (address(assetId) == NATIVE_ASSETID) return;
        if (spender == NULL_ADDRESS) revert NullAddrIsNotAValidSpender();
        uint256 allowance = assetId.allowance(address(this), spender);
        if (allowance < amount) SafeERC20.safeApprove(IERC20(assetId), spender, MAX_INT);
    }

    /// @notice Transfers tokens from the inheriting contract to a given
    ///         recipient
    /// @param assetId Token address to transfer
    /// @param recipient Address to send token to
    /// @param amount Amount to send to given recipient
    function transferERC20(
        address assetId,
        address recipient,
        uint256 amount
    ) private {
        if (isNativeAsset(assetId)) revert NullAddrIsNotAnERC20Token();
        SafeERC20.safeTransfer(IERC20(assetId), recipient, amount);
    }

    /// @notice Transfers tokens from a sender to a given recipient
    /// @param assetId Token address to transfer
    /// @param from Address of sender/owner
    /// @param to Address of recipient/spender
    /// @param amount Amount to transfer from owner to spender
    function transferFromERC20(
        address assetId,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (assetId == NATIVE_ASSETID) revert NullAddrIsNotAnERC20Token();
        if (to == NULL_ADDRESS) revert NoTransferToNullAddress();
        SafeERC20.safeTransferFrom(IERC20(assetId), from, to, amount);
    }

    /// @notice Deposits an asset into the contract and performs checks to avoid NativeValueWithERC
    /// @param tokenId Token to deposit
    /// @param amount Amount to deposit
    /// @param isNative Wether the token is native or ERC20
    function depositAsset(
        address tokenId,
        uint256 amount,
        bool isNative
    ) internal {
        if (amount == 0) revert InvalidAmount();
        if (isNative) {
            if (msg.value != amount) revert InvalidAmount();
        } else {
            if (msg.value != 0) revert NativeValueWithERC();
            uint256 _fromTokenBalance = LibAsset.getOwnBalance(tokenId);
            LibAsset.transferFromERC20(tokenId, msg.sender, address(this), amount);
            if (LibAsset.getOwnBalance(tokenId) - _fromTokenBalance != amount) revert InvalidAmount();
        }
    }

    /// @notice Overload for depositAsset(address tokenId, uint256 amount, bool isNative)
    /// @param tokenId Token to deposit
    /// @param amount Amount to deposit
    function depositAsset(address tokenId, uint256 amount) internal {
        return depositAsset(tokenId, amount, tokenId == NATIVE_ASSETID);
    }

    /// @notice Determines whether the given assetId is the native asset
    /// @param assetId The asset identifier to evaluate
    /// @return Boolean indicating if the asset is the native asset
    function isNativeAsset(address assetId) internal pure returns (bool) {
        return assetId == NATIVE_ASSETID;
    }

    /// @notice Wrapper function to transfer a given asset (native or erc20) to
    ///         some recipient. Should handle all non-compliant return value
    ///         tokens as well by using the SafeERC20 contract by open zeppelin.
    /// @param assetId Asset id for transfer (address(0) for native asset,
    ///                token address for erc20s)
    /// @param recipient Address to send asset to
    /// @param amount Amount to send to given recipient
    function transferAsset(
        address assetId,
        address payable recipient,
        uint256 amount
    ) internal {
        (assetId == NATIVE_ASSETID)
            ? transferNativeAsset(recipient, amount)
            : transferERC20(assetId, recipient, amount);
    }

    /// @dev Checks whether the given address is a contract and contains code
    function isContract(address _contractAddr) internal view returns (bool) {
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(_contractAddr)
        }
        return size > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface ILiFi {
    /// Structs ///

    struct LiFiData {
        bytes32 transactionId;
        string integrator;
        address referrer;
        address sendingAssetId;
        address receivingAssetId;
        address receiver;
        uint256 destinationChainId;
        uint256 amount;
    }

    /// Events ///

    event LiFiTransferStarted(
        bytes32 indexed transactionId,
        string bridge,
        string bridgeData,
        string integrator,
        address referrer,
        address sendingAssetId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 destinationChainId,
        bool hasSourceSwap,
        bool hasDestinationCall
    );

    event LiFiTransferCompleted(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface ICBridge {
    function send(
        address _receiver,
        address _token,
        uint256 _amount,
        uint64 _dstChinId,
        uint64 _nonce,
        uint32 _maxSlippage
    ) external;

    function sendNative(
        address _receiver,
        uint256 _amount,
        uint64 _dstChinId,
        uint64 _nonce,
        uint32 _maxSlippage
    ) external payable;

    function relay(
        bytes calldata _relayRequest,
        bytes[] calldata _sigs,
        address[] calldata _signers,
        uint256[] calldata _powers
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { IDiamondCut } from "../Interfaces/IDiamondCut.sol";

library LibDiamond {
    bytes32 internal constant DIAMOND_STORAGE_POSITION = keccak256("diamond.standard.diamond.storage");

    struct FacetAddressAndPosition {
        address facetAddress;
        uint96 functionSelectorPosition; // position in facetFunctionSelectors.functionSelectors array
    }

    struct FacetFunctionSelectors {
        bytes4[] functionSelectors;
        uint256 facetAddressPosition; // position of facetAddress in facetAddresses array
    }

    struct DiamondStorage {
        // maps function selector to the facet address and
        // the position of the selector in the facetFunctionSelectors.selectors array
        mapping(bytes4 => FacetAddressAndPosition) selectorToFacetAndPosition;
        // maps facet addresses to function selectors
        mapping(address => FacetFunctionSelectors) facetFunctionSelectors;
        // facet addresses
        address[] facetAddresses;
        // Used to query if a contract implements an interface.
        // Used to implement ERC-165.
        mapping(bytes4 => bool) supportedInterfaces;
        // owner of the contract
        address contractOwner;
    }

    function diamondStorage() internal pure returns (DiamondStorage storage ds) {
        bytes32 position = DIAMOND_STORAGE_POSITION;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            ds.slot := position
        }
    }

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    function setContractOwner(address _newOwner) internal {
        DiamondStorage storage ds = diamondStorage();
        address previousOwner = ds.contractOwner;
        ds.contractOwner = _newOwner;
        emit OwnershipTransferred(previousOwner, _newOwner);
    }

    function contractOwner() internal view returns (address contractOwner_) {
        contractOwner_ = diamondStorage().contractOwner;
    }

    function enforceIsContractOwner() internal view {
        require(msg.sender == diamondStorage().contractOwner, "LibDiamond: Must be contract owner");
    }

    event DiamondCut(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);

    // Internal function version of diamondCut
    function diamondCut(
        IDiamondCut.FacetCut[] memory _diamondCut,
        address _init,
        bytes memory _calldata
    ) internal {
        for (uint256 facetIndex; facetIndex < _diamondCut.length; facetIndex++) {
            IDiamondCut.FacetCutAction action = _diamondCut[facetIndex].action;
            if (action == IDiamondCut.FacetCutAction.Add) {
                addFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else if (action == IDiamondCut.FacetCutAction.Replace) {
                replaceFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else if (action == IDiamondCut.FacetCutAction.Remove) {
                removeFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else {
                revert("LibDiamondCut: Incorrect FacetCutAction");
            }
        }
        emit DiamondCut(_diamondCut, _init, _calldata);
        initializeDiamondCut(_init, _calldata);
    }

    function addFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        require(_functionSelectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        DiamondStorage storage ds = diamondStorage();
        require(_facetAddress != address(0), "LibDiamondCut: Add facet can't be address(0)");
        uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
        // add new facet address if it does not exist
        if (selectorPosition == 0) {
            addFacet(ds, _facetAddress);
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; selectorIndex++) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            require(oldFacetAddress == address(0), "LibDiamondCut: Can't add function that already exists");
            addFunction(ds, selector, selectorPosition, _facetAddress);
            selectorPosition++;
        }
    }

    function replaceFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        require(_functionSelectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        DiamondStorage storage ds = diamondStorage();
        require(_facetAddress != address(0), "LibDiamondCut: Add facet can't be address(0)");
        uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
        // add new facet address if it does not exist
        if (selectorPosition == 0) {
            addFacet(ds, _facetAddress);
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; selectorIndex++) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            require(oldFacetAddress != _facetAddress, "LibDiamondCut: Can't replace function with same function");
            removeFunction(ds, oldFacetAddress, selector);
            addFunction(ds, selector, selectorPosition, _facetAddress);
            selectorPosition++;
        }
    }

    function removeFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        require(_functionSelectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        DiamondStorage storage ds = diamondStorage();
        // if function does not exist then do nothing and return
        require(_facetAddress == address(0), "LibDiamondCut: Remove facet address must be address(0)");
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; selectorIndex++) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            removeFunction(ds, oldFacetAddress, selector);
        }
    }

    function addFacet(DiamondStorage storage ds, address _facetAddress) internal {
        enforceHasContractCode(_facetAddress, "LibDiamondCut: New facet has no code");
        ds.facetFunctionSelectors[_facetAddress].facetAddressPosition = ds.facetAddresses.length;
        ds.facetAddresses.push(_facetAddress);
    }

    function addFunction(
        DiamondStorage storage ds,
        bytes4 _selector,
        uint96 _selectorPosition,
        address _facetAddress
    ) internal {
        ds.selectorToFacetAndPosition[_selector].functionSelectorPosition = _selectorPosition;
        ds.facetFunctionSelectors[_facetAddress].functionSelectors.push(_selector);
        ds.selectorToFacetAndPosition[_selector].facetAddress = _facetAddress;
    }

    function removeFunction(
        DiamondStorage storage ds,
        address _facetAddress,
        bytes4 _selector
    ) internal {
        require(_facetAddress != address(0), "LibDiamondCut: Can't remove function that doesn't exist");
        // an immutable function is a function defined directly in a diamond
        require(_facetAddress != address(this), "LibDiamondCut: Can't remove immutable function");
        // replace selector with last selector, then delete last selector
        uint256 selectorPosition = ds.selectorToFacetAndPosition[_selector].functionSelectorPosition;
        uint256 lastSelectorPosition = ds.facetFunctionSelectors[_facetAddress].functionSelectors.length - 1;
        // if not the same then replace _selector with lastSelector
        if (selectorPosition != lastSelectorPosition) {
            bytes4 lastSelector = ds.facetFunctionSelectors[_facetAddress].functionSelectors[lastSelectorPosition];
            ds.facetFunctionSelectors[_facetAddress].functionSelectors[selectorPosition] = lastSelector;
            ds.selectorToFacetAndPosition[lastSelector].functionSelectorPosition = uint96(selectorPosition);
        }
        // delete the last selector
        ds.facetFunctionSelectors[_facetAddress].functionSelectors.pop();
        delete ds.selectorToFacetAndPosition[_selector];

        // if no more selectors for facet address then delete the facet address
        if (lastSelectorPosition == 0) {
            // replace facet address with last facet address and delete last facet address
            uint256 lastFacetAddressPosition = ds.facetAddresses.length - 1;
            uint256 facetAddressPosition = ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
            if (facetAddressPosition != lastFacetAddressPosition) {
                address lastFacetAddress = ds.facetAddresses[lastFacetAddressPosition];
                ds.facetAddresses[facetAddressPosition] = lastFacetAddress;
                ds.facetFunctionSelectors[lastFacetAddress].facetAddressPosition = facetAddressPosition;
            }
            ds.facetAddresses.pop();
            delete ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
        }
    }

    function initializeDiamondCut(address _init, bytes memory _calldata) internal {
        if (_init == address(0)) {
            require(_calldata.length == 0, "LibDiamondCut: _init is address(0) but_calldata is not empty");
        } else {
            require(_calldata.length > 0, "LibDiamondCut: _calldata is empty but _init is not address(0)");
            if (_init != address(this)) {
                enforceHasContractCode(_init, "LibDiamondCut: _init address has no code");
            }
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, bytes memory error) = _init.delegatecall(_calldata);
            if (!success) {
                if (error.length > 0) {
                    // bubble up the error
                    revert(string(error));
                } else {
                    revert("LibDiamondCut: _init function reverted");
                }
            }
        }
    }

    function enforceHasContractCode(address _contract, string memory _errorMessage) internal view {
        uint256 contractSize;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            contractSize := extcodesize(_contract)
        }
        require(contractSize > 0, _errorMessage);
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

/// @title Reentrancy Guard
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide protection against reentrancy
abstract contract ReentrancyGuard {
    /// Storage ///

    bytes32 private constant NAMESPACE = hex"a65bb2f450488ab0858c00edc14abc5297769bf42adb48cfb77752890e8b697b";

    /// Types ///

    struct ReentrancyStorage {
        uint256 status;
    }

    /// Errors ///

    error ReentrancyError();

    /// Constants ///

    uint256 private constant _NOT_ENTERED = 0;
    uint256 private constant _ENTERED = 1;

    /// Modifiers ///

    modifier nonReentrant() {
        ReentrancyStorage storage s = reentrancyStorage();
        if (s.status == _ENTERED) revert ReentrancyError();
        s.status = _ENTERED;
        _;
        s.status = _NOT_ENTERED;
    }

    /// Private Methods ///

    /// @dev fetch local storage
    function reentrancyStorage() private pure returns (ReentrancyStorage storage data) {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            data.slot := position
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

error InvalidAmount();
error TokenAddressIsZero();
error CannotBridgeToSameNetwork();
error ZeroPostSwapBalance();
error InvalidBridgeConfigLength();
error NoSwapDataProvided();
error NativeValueWithERC();
error ContractCallNotAllowed();
error NullAddrIsNotAValidSpender();
error NullAddrIsNotAnERC20Token();
error NoTransferToNullAddress();
error NativeAssetTransferFailed();
error InvalidContract();
error InvalidConfig();

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibStorage } from "../Libraries/LibStorage.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { InvalidAmount, ContractCallNotAllowed, NoSwapDataProvided } from "../Errors/GenericErrors.sol";

/// @title Swapper
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide swap functionality
contract SwapperV2 is ILiFi {
    /// Storage ///

    LibStorage internal appStorage;

    /// Modifiers ///

    /// @dev Sends any leftover balances back to the user
    modifier noLeftovers(LibSwap.SwapData[] calldata _swapData, address payable _receiver) {
        uint256 nSwaps = _swapData.length;
        if (nSwaps != 1) {
            uint256[] memory initialBalances = _fetchBalances(_swapData);
            address finalAsset = _swapData[nSwaps - 1].receivingAssetId;
            uint256 curBalance = 0;
            uint256 newBalance = 0;
            _;

            for (uint256 i = 0; i < nSwaps - 1; i++) {
                address curAsset = _swapData[i].receivingAssetId;
                if (curAsset == finalAsset) continue; // Handle multi-to-one swaps
                newBalance = LibAsset.getOwnBalance(curAsset);
                curBalance = newBalance > initialBalances[i] ? newBalance - initialBalances[i] : newBalance;
                if (curBalance > 0) LibAsset.transferAsset(curAsset, _receiver, curBalance);
            }
        } else _;
    }

    /// Internal Methods ///

    /// @dev Validates input before executing swaps
    /// @param _lifiData LiFi tracking data
    /// @param _swapData Array of data used to execute swaps
    function _executeAndCheckSwaps(
        LiFiData memory _lifiData,
        LibSwap.SwapData[] calldata _swapData,
        address payable _receiver
    ) internal returns (uint256) {
        uint256 nSwaps = _swapData.length;
        if (nSwaps == 0) revert NoSwapDataProvided();
        address finalTokenId = _swapData[_swapData.length - 1].receivingAssetId;
        uint256 swapBalance = LibAsset.getOwnBalance(finalTokenId);
        _executeSwaps(_lifiData, _swapData, _receiver);
        uint256 newBalance = LibAsset.getOwnBalance(finalTokenId);
        swapBalance = newBalance > swapBalance ? newBalance - swapBalance : newBalance;
        if (swapBalance == 0) revert InvalidAmount();
        return swapBalance;
    }

    /// Private Methods ///

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _lifiData LiFi tracking data
    /// @param _swapData Array of data used to execute swaps
    function _executeSwaps(
        LiFiData memory _lifiData,
        LibSwap.SwapData[] calldata _swapData,
        address payable _receiver
    ) internal noLeftovers(_swapData, _receiver) {
        for (uint256 i = 0; i < _swapData.length; i++) {
            LibSwap.SwapData calldata currentSwapData = _swapData[i];
            if (
                !(appStorage.dexAllowlist[currentSwapData.approveTo] &&
                    appStorage.dexAllowlist[currentSwapData.callTo] &&
                    appStorage.dexFuncSignatureAllowList[bytes32(currentSwapData.callData[:8])])
            ) revert ContractCallNotAllowed();
            LibSwap.swap(_lifiData.transactionId, currentSwapData);
        }
    }

    /// @dev Fetches balances of tokens to be swapped before swapping.
    /// @param _swapData Array of data used to execute swaps
    /// @return uint256[] Array of token balances.
    function _fetchBalances(LibSwap.SwapData[] calldata _swapData) private view returns (uint256[] memory) {
        uint256 length = _swapData.length;
        uint256[] memory balances = new uint256[](length);
        for (uint256 i = 0; i < length; i++) {
            balances[i] = LibAsset.getOwnBalance(_swapData[i].receivingAssetId);
        }
        return balances;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface IDiamondCut {
    enum FacetCutAction {
        Add,
        Replace,
        Remove
    }
    // Add=0, Replace=1, Remove=2

    struct FacetCut {
        address facetAddress;
        FacetCutAction action;
        bytes4[] functionSelectors;
    }

    /// @notice Add/replace/remove any number of functions and optionally execute
    ///         a function with delegatecall
    /// @param _diamondCut Contains the facet addresses and function selectors
    /// @param _init The address of the contract or facet to execute _calldata
    /// @param _calldata A function call, including function selector and arguments
    ///                  _calldata is executed with delegatecall on _init
    function diamondCut(
        FacetCut[] calldata _diamondCut,
        address _init,
        bytes calldata _calldata
    ) external;

    event DiamondCut(FacetCut[] _diamondCut, address _init, bytes _calldata);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { LibAsset, IERC20 } from "./LibAsset.sol";
import { LibUtil } from "./LibUtil.sol";
import { InvalidContract } from "../Errors/GenericErrors.sol";

library LibSwap {
    error NoSwapFromZeroBalance();

    struct SwapData {
        address callTo;
        address approveTo;
        address sendingAssetId;
        address receivingAssetId;
        uint256 fromAmount;
        bytes callData;
    }

    event AssetSwapped(
        bytes32 transactionId,
        address dex,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount,
        uint256 timestamp
    );

    function swap(bytes32 transactionId, SwapData calldata _swapData) internal {
        if (!LibAsset.isContract(_swapData.callTo)) revert InvalidContract();
        uint256 fromAmount = _swapData.fromAmount;
        if (fromAmount == 0) revert NoSwapFromZeroBalance();
        uint256 nativeValue = 0;
        address fromAssetId = _swapData.sendingAssetId;
        address toAssetId = _swapData.receivingAssetId;
        uint256 initialSendingAssetBalance = LibAsset.getOwnBalance(fromAssetId);
        uint256 initialReceivingAssetBalance = LibAsset.getOwnBalance(toAssetId);
        uint256 toDeposit = initialSendingAssetBalance < fromAmount ? fromAmount - initialSendingAssetBalance : 0;

        if (!LibAsset.isNativeAsset(fromAssetId)) {
            LibAsset.maxApproveERC20(IERC20(fromAssetId), _swapData.approveTo, fromAmount);
            if (toDeposit != 0) {
                LibAsset.transferFromERC20(fromAssetId, msg.sender, address(this), toDeposit);
            }
        } else {
            nativeValue = fromAmount;
        }

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = _swapData.callTo.call{ value: nativeValue }(_swapData.callData);
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }

        uint256 newBalance = LibAsset.getOwnBalance(toAssetId);

        emit AssetSwapped(
            transactionId,
            _swapData.callTo,
            _swapData.sendingAssetId,
            toAssetId,
            fromAmount,
            newBalance > initialReceivingAssetBalance ? newBalance - initialReceivingAssetBalance : newBalance,
            block.timestamp
        );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

struct LibStorage {
    mapping(address => bool) dexAllowlist;
    mapping(bytes32 => bool) dexFuncSignatureAllowList;
    address[] dexs;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import "./LibBytes.sol";

library LibUtil {
    using LibBytes for bytes;

    function getRevertMsg(bytes memory _res) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

library LibBytes {
    // solhint-disable no-inline-assembly

    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        // solhint-disable-next-line no-empty-blocks
                        for {

                        } eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"CannotBridgeToSameNetwork","type":"error"},{"inputs":[],"name":"ContractCallNotAllowed","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidConfig","type":"error"},{"inputs":[],"name":"InvalidContract","type":"error"},{"inputs":[],"name":"NativeAssetTransferFailed","type":"error"},{"inputs":[],"name":"NativeValueWithERC","type":"error"},{"inputs":[],"name":"NoSwapDataProvided","type":"error"},{"inputs":[],"name":"NoSwapFromZeroBalance","type":"error"},{"inputs":[],"name":"NoTransferToNullAddress","type":"error"},{"inputs":[],"name":"NullAddrIsNotAValidSpender","type":"error"},{"inputs":[],"name":"NullAddrIsNotAnERC20Token","type":"error"},{"inputs":[],"name":"ReentrancyError","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"cBridge","type":"address"},{"indexed":false,"internalType":"uint256","name":"chainId","type":"uint256"}],"name":"CBridgeInitialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"LiFiTransferCompleted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"string","name":"bridge","type":"string"},{"indexed":false,"internalType":"string","name":"bridgeData","type":"string"},{"indexed":false,"internalType":"string","name":"integrator","type":"string"},{"indexed":false,"internalType":"address","name":"referrer","type":"address"},{"indexed":false,"internalType":"address","name":"sendingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"indexed":false,"internalType":"bool","name":"hasSourceSwap","type":"bool"},{"indexed":false,"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"name":"LiFiTransferStarted","type":"event"},{"inputs":[{"internalType":"address","name":"_cBridge","type":"address"},{"internalType":"uint64","name":"_chainId","type":"uint64"}],"name":"initCbridge","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ILiFi.LiFiData","name":"_lifiData","type":"tuple"},{"components":[{"internalType":"uint32","name":"maxSlippage","type":"uint32"},{"internalType":"uint64","name":"dstChainId","type":"uint64"},{"internalType":"uint64","name":"nonce","type":"uint64"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"token","type":"address"}],"internalType":"struct CBridgeFacet.CBridgeData","name":"_cBridgeData","type":"tuple"}],"name":"startBridgeTokensViaCBridge","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ILiFi.LiFiData","name":"_lifiData","type":"tuple"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"}],"internalType":"struct LibSwap.SwapData[]","name":"_swapData","type":"tuple[]"},{"components":[{"internalType":"uint32","name":"maxSlippage","type":"uint32"},{"internalType":"uint64","name":"dstChainId","type":"uint64"},{"internalType":"uint64","name":"nonce","type":"uint64"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"token","type":"address"}],"internalType":"struct CBridgeFacet.CBridgeData","name":"_cBridgeData","type":"tuple"}],"name":"swapAndStartBridgeTokensViaCBridge","outputs":[],"stateMutability":"payable","type":"function"}]

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