Contract 0x629Af5d9d1adCec574F0A59e8811F02BbCe178Be 4

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { ILiFi } from "../Interfaces/ILiFi.sol";
import { IAcrossSpokePool } from "../Interfaces/IAcrossSpokePool.sol";
import { LibDiamond } from "../Libraries/LibDiamond.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";
import { ReentrancyGuard } from "../Helpers/ReentrancyGuard.sol";
import { InvalidAmount, NativeValueWithERC, InvalidConfig } from "../Errors/GenericErrors.sol";
import { Swapper } from "../Helpers/Swapper.sol";

// @title Across Facet
/// @author LI.FI (https://li.fi)
/// @notice Provides functionality for bridging through Across Protocol
contract AcrossFacet is ILiFi, ReentrancyGuard, Swapper {
    /// Storage ///
    bytes32 internal constant NAMESPACE = hex"c2f0b34693bd32d5a7baf53803100a174650293fd2f4c4bad2415c582c046d46"; // keccak256("com.lifi.facets.across");
    struct Storage {
        // solhint-disable-next-line var-name-mixedcase
        address ZERO_ADDRESS;
        // solhint-disable-next-line var-name-mixedcase
        address WETH;
        // solhint-disable-next-line var-name-mixedcase
        address SPOKE_POOL;
    }

    /// Types ///

    struct AcrossData {
        address recipient;
        address token;
        uint256 amount;
        uint256 destinationChainId;
        uint64 relayerFeePct;
        uint32 quoteTimestamp;
    }

    /// Errors ///

    error UseWethInstead();

    /// Events ///

    event AcrossInitialized(address weth, address spokePool);

    /// Init ///

    /// @notice Initializes local variables for the Across facet
    /// @param _weth WETH contract address for the current chain
    /// @param _spokePool Across spoke pool contract address
    function initAcross(address _weth, address _spokePool) external {
        LibDiamond.enforceIsContractOwner();
        Storage storage s = getStorage();
        s.ZERO_ADDRESS = 0x0000000000000000000000000000000000000000;
        s.WETH = _weth;
        s.SPOKE_POOL = _spokePool;
        emit AcrossInitialized(_weth, _spokePool);
    }

    /// External Methods ///

    /// @notice Bridges tokens via Across
    /// @param _lifiData data used purely for tracking and analytics
    /// @param _acrossData data specific to Across
    function startBridgeTokensViaAcross(LiFiData memory _lifiData, AcrossData calldata _acrossData)
        external
        payable
        nonReentrant
    {
        LibAsset.depositAsset(_acrossData.token, _acrossData.amount);
        _startBridge(_acrossData);

        emit LiFiTransferStarted(
            _lifiData.transactionId,
            "across",
            "",
            _lifiData.integrator,
            _lifiData.referrer,
            _acrossData.token,
            _lifiData.receivingAssetId,
            _acrossData.recipient,
            _acrossData.amount,
            _lifiData.destinationChainId,
            false,
            false
        );
    }

    /// @notice Performs a swap before bridging via Across
    /// @param _lifiData data used purely for tracking and analytics
    /// @param _swapData an array of swap related data for performing swaps before bridging
    /// @param _acrossData data specific to Across
    function swapAndStartBridgeTokensViaAcross(
        LiFiData calldata _lifiData,
        LibSwap.SwapData[] calldata _swapData,
        AcrossData memory _acrossData
    ) external payable nonReentrant {
        _acrossData.amount = _executeAndCheckSwaps(_lifiData, _swapData);
        _startBridge(_acrossData);

        emit LiFiTransferStarted(
            _lifiData.transactionId,
            "across",
            "",
            _lifiData.integrator,
            _lifiData.referrer,
            _swapData[0].sendingAssetId,
            _lifiData.receivingAssetId,
            _acrossData.recipient,
            _swapData[0].fromAmount,
            _lifiData.destinationChainId,
            true,
            false
        );
    }

    /// External Methods ///

    /// @notice Sets WETH contract address
    /// @param _weth the WETH contract address for the current chain
    function setWeth(address _weth) external {
        LibDiamond.enforceIsContractOwner();
        Storage storage s = getStorage();
        s.WETH = _weth;
    }

    /// @notice Sets spoke pool contract address
    /// @param _spokePool Across spoke pool contract address
    function setSpokePool(address _spokePool) external {
        LibDiamond.enforceIsContractOwner();
        Storage storage s = getStorage();
        s.SPOKE_POOL = _spokePool;
    }

    /// Internal Methods ///

    /// @dev Contains the business logic for the bridge via Across
    /// @param _acrossData data specific to Across
    function _startBridge(AcrossData memory _acrossData) internal {
        Storage storage s = getStorage();
        if (_acrossData.token == s.ZERO_ADDRESS) _acrossData.token = s.WETH;
        else LibAsset.maxApproveERC20(IERC20(_acrossData.token), s.SPOKE_POOL, _acrossData.amount);
        IAcrossSpokePool pool = IAcrossSpokePool(s.SPOKE_POOL);
        pool.deposit{ value: msg.value }(
            _acrossData.recipient,
            _acrossData.token,
            _acrossData.amount,
            _acrossData.destinationChainId,
            _acrossData.relayerFeePct,
            _acrossData.quoteTimestamp
        );
    }

    /// @dev fetch local storage
    function getStorage() private pure returns (Storage storage s) {
        bytes32 namespace = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            s.slot := namespace
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface ILiFi {
    /// Structs ///

    struct LiFiData {
        bytes32 transactionId;
        string integrator;
        address referrer;
        address sendingAssetId;
        address receivingAssetId;
        address receiver;
        uint256 destinationChainId;
        uint256 amount;
    }

    /// Events ///

    event LiFiTransferStarted(
        bytes32 indexed transactionId,
        string bridge,
        string bridgeData,
        string integrator,
        address referrer,
        address sendingAssetId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 destinationChainId,
        bool hasSourceSwap,
        bool hasDestinationCall
    );

    event LiFiTransferCompleted(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface IAcrossSpokePool {
    function deposit(
        address recipient, // Recipient address
        address originToken, // Address of the token
        uint256 amount, // Token amount
        uint256 destinationChainId, // ⛓ id
        uint64 relayerFeePct, // see #Fees Calculation
        uint32 quoteTimestamp // Timestamp for the quote creation
    ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { IDiamondCut } from "../Interfaces/IDiamondCut.sol";

library LibDiamond {
    bytes32 internal constant DIAMOND_STORAGE_POSITION = keccak256("diamond.standard.diamond.storage");

    struct FacetAddressAndPosition {
        address facetAddress;
        uint96 functionSelectorPosition; // position in facetFunctionSelectors.functionSelectors array
    }

    struct FacetFunctionSelectors {
        bytes4[] functionSelectors;
        uint256 facetAddressPosition; // position of facetAddress in facetAddresses array
    }

    struct DiamondStorage {
        // maps function selector to the facet address and
        // the position of the selector in the facetFunctionSelectors.selectors array
        mapping(bytes4 => FacetAddressAndPosition) selectorToFacetAndPosition;
        // maps facet addresses to function selectors
        mapping(address => FacetFunctionSelectors) facetFunctionSelectors;
        // facet addresses
        address[] facetAddresses;
        // Used to query if a contract implements an interface.
        // Used to implement ERC-165.
        mapping(bytes4 => bool) supportedInterfaces;
        // owner of the contract
        address contractOwner;
    }

    function diamondStorage() internal pure returns (DiamondStorage storage ds) {
        bytes32 position = DIAMOND_STORAGE_POSITION;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            ds.slot := position
        }
    }

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    function setContractOwner(address _newOwner) internal {
        DiamondStorage storage ds = diamondStorage();
        address previousOwner = ds.contractOwner;
        ds.contractOwner = _newOwner;
        emit OwnershipTransferred(previousOwner, _newOwner);
    }

    function contractOwner() internal view returns (address contractOwner_) {
        contractOwner_ = diamondStorage().contractOwner;
    }

    function enforceIsContractOwner() internal view {
        require(msg.sender == diamondStorage().contractOwner, "LibDiamond: Must be contract owner");
    }

    event DiamondCut(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);

    // Internal function version of diamondCut
    function diamondCut(
        IDiamondCut.FacetCut[] memory _diamondCut,
        address _init,
        bytes memory _calldata
    ) internal {
        for (uint256 facetIndex; facetIndex < _diamondCut.length; facetIndex++) {
            IDiamondCut.FacetCutAction action = _diamondCut[facetIndex].action;
            if (action == IDiamondCut.FacetCutAction.Add) {
                addFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else if (action == IDiamondCut.FacetCutAction.Replace) {
                replaceFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else if (action == IDiamondCut.FacetCutAction.Remove) {
                removeFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else {
                revert("LibDiamondCut: Incorrect FacetCutAction");
            }
        }
        emit DiamondCut(_diamondCut, _init, _calldata);
        initializeDiamondCut(_init, _calldata);
    }

    function addFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        require(_functionSelectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        DiamondStorage storage ds = diamondStorage();
        require(_facetAddress != address(0), "LibDiamondCut: Add facet can't be address(0)");
        uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
        // add new facet address if it does not exist
        if (selectorPosition == 0) {
            addFacet(ds, _facetAddress);
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; selectorIndex++) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            require(oldFacetAddress == address(0), "LibDiamondCut: Can't add function that already exists");
            addFunction(ds, selector, selectorPosition, _facetAddress);
            selectorPosition++;
        }
    }

    function replaceFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        require(_functionSelectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        DiamondStorage storage ds = diamondStorage();
        require(_facetAddress != address(0), "LibDiamondCut: Add facet can't be address(0)");
        uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
        // add new facet address if it does not exist
        if (selectorPosition == 0) {
            addFacet(ds, _facetAddress);
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; selectorIndex++) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            require(oldFacetAddress != _facetAddress, "LibDiamondCut: Can't replace function with same function");
            removeFunction(ds, oldFacetAddress, selector);
            addFunction(ds, selector, selectorPosition, _facetAddress);
            selectorPosition++;
        }
    }

    function removeFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        require(_functionSelectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        DiamondStorage storage ds = diamondStorage();
        // if function does not exist then do nothing and return
        require(_facetAddress == address(0), "LibDiamondCut: Remove facet address must be address(0)");
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; selectorIndex++) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            removeFunction(ds, oldFacetAddress, selector);
        }
    }

    function addFacet(DiamondStorage storage ds, address _facetAddress) internal {
        enforceHasContractCode(_facetAddress, "LibDiamondCut: New facet has no code");
        ds.facetFunctionSelectors[_facetAddress].facetAddressPosition = ds.facetAddresses.length;
        ds.facetAddresses.push(_facetAddress);
    }

    function addFunction(
        DiamondStorage storage ds,
        bytes4 _selector,
        uint96 _selectorPosition,
        address _facetAddress
    ) internal {
        ds.selectorToFacetAndPosition[_selector].functionSelectorPosition = _selectorPosition;
        ds.facetFunctionSelectors[_facetAddress].functionSelectors.push(_selector);
        ds.selectorToFacetAndPosition[_selector].facetAddress = _facetAddress;
    }

    function removeFunction(
        DiamondStorage storage ds,
        address _facetAddress,
        bytes4 _selector
    ) internal {
        require(_facetAddress != address(0), "LibDiamondCut: Can't remove function that doesn't exist");
        // an immutable function is a function defined directly in a diamond
        require(_facetAddress != address(this), "LibDiamondCut: Can't remove immutable function");
        // replace selector with last selector, then delete last selector
        uint256 selectorPosition = ds.selectorToFacetAndPosition[_selector].functionSelectorPosition;
        uint256 lastSelectorPosition = ds.facetFunctionSelectors[_facetAddress].functionSelectors.length - 1;
        // if not the same then replace _selector with lastSelector
        if (selectorPosition != lastSelectorPosition) {
            bytes4 lastSelector = ds.facetFunctionSelectors[_facetAddress].functionSelectors[lastSelectorPosition];
            ds.facetFunctionSelectors[_facetAddress].functionSelectors[selectorPosition] = lastSelector;
            ds.selectorToFacetAndPosition[lastSelector].functionSelectorPosition = uint96(selectorPosition);
        }
        // delete the last selector
        ds.facetFunctionSelectors[_facetAddress].functionSelectors.pop();
        delete ds.selectorToFacetAndPosition[_selector];

        // if no more selectors for facet address then delete the facet address
        if (lastSelectorPosition == 0) {
            // replace facet address with last facet address and delete last facet address
            uint256 lastFacetAddressPosition = ds.facetAddresses.length - 1;
            uint256 facetAddressPosition = ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
            if (facetAddressPosition != lastFacetAddressPosition) {
                address lastFacetAddress = ds.facetAddresses[lastFacetAddressPosition];
                ds.facetAddresses[facetAddressPosition] = lastFacetAddress;
                ds.facetFunctionSelectors[lastFacetAddress].facetAddressPosition = facetAddressPosition;
            }
            ds.facetAddresses.pop();
            delete ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
        }
    }

    function initializeDiamondCut(address _init, bytes memory _calldata) internal {
        if (_init == address(0)) {
            require(_calldata.length == 0, "LibDiamondCut: _init is address(0) but_calldata is not empty");
        } else {
            require(_calldata.length > 0, "LibDiamondCut: _calldata is empty but _init is not address(0)");
            if (_init != address(this)) {
                enforceHasContractCode(_init, "LibDiamondCut: _init address has no code");
            }
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, bytes memory error) = _init.delegatecall(_calldata);
            if (!success) {
                if (error.length > 0) {
                    // bubble up the error
                    revert(string(error));
                } else {
                    revert("LibDiamondCut: _init function reverted");
                }
            }
        }
    }

    function enforceHasContractCode(address _contract, string memory _errorMessage) internal view {
        uint256 contractSize;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            contractSize := extcodesize(_contract)
        }
        require(contractSize > 0, _errorMessage);
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;
import { NullAddrIsNotAnERC20Token, NullAddrIsNotAValidSpender, NoTransferToNullAddress, InvalidAmount, NativeValueWithERC, NativeAssetTransferFailed } from "../Errors/GenericErrors.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/// @title LibAsset
/// @author Connext <[email protected]>
/// @notice This library contains helpers for dealing with onchain transfers
///         of assets, including accounting for the native asset `assetId`
///         conventions and any noncompliant ERC20 transfers
library LibAsset {
    uint256 private constant MAX_INT = type(uint256).max;

    address internal constant NULL_ADDRESS = 0x0000000000000000000000000000000000000000; //address(0)

    /// @dev All native assets use the empty address for their asset id
    ///      by convention

    address internal constant NATIVE_ASSETID = NULL_ADDRESS; //address(0)

    /// @notice Gets the balance of the inheriting contract for the given asset
    /// @param assetId The asset identifier to get the balance of
    /// @return Balance held by contracts using this library
    function getOwnBalance(address assetId) internal view returns (uint256) {
        return assetId == NATIVE_ASSETID ? address(this).balance : IERC20(assetId).balanceOf(address(this));
    }

    /// @notice Transfers ether from the inheriting contract to a given
    ///         recipient
    /// @param recipient Address to send ether to
    /// @param amount Amount to send to given recipient
    function transferNativeAsset(address payable recipient, uint256 amount) private {
        if (recipient == NULL_ADDRESS) revert NoTransferToNullAddress();
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = recipient.call{ value: amount }("");
        if (!success) revert NativeAssetTransferFailed();
    }

    /// @notice Gives MAX approval for another address to spend tokens
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param amount Amount to approve for spending
    function maxApproveERC20(
        IERC20 assetId,
        address spender,
        uint256 amount
    ) internal {
        if (address(assetId) == NATIVE_ASSETID) return;
        if (spender == NULL_ADDRESS) revert NullAddrIsNotAValidSpender();
        uint256 allowance = assetId.allowance(address(this), spender);
        if (allowance < amount) SafeERC20.safeApprove(IERC20(assetId), spender, MAX_INT);
    }

    /// @notice Transfers tokens from the inheriting contract to a given
    ///         recipient
    /// @param assetId Token address to transfer
    /// @param recipient Address to send token to
    /// @param amount Amount to send to given recipient
    function transferERC20(
        address assetId,
        address recipient,
        uint256 amount
    ) private {
        if (isNativeAsset(assetId)) revert NullAddrIsNotAnERC20Token();
        SafeERC20.safeTransfer(IERC20(assetId), recipient, amount);
    }

    /// @notice Transfers tokens from a sender to a given recipient
    /// @param assetId Token address to transfer
    /// @param from Address of sender/owner
    /// @param to Address of recipient/spender
    /// @param amount Amount to transfer from owner to spender
    function transferFromERC20(
        address assetId,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (assetId == NATIVE_ASSETID) revert NullAddrIsNotAnERC20Token();
        if (to == NULL_ADDRESS) revert NoTransferToNullAddress();
        SafeERC20.safeTransferFrom(IERC20(assetId), from, to, amount);
    }

    /// @notice Deposits an asset into the contract and performs checks to avoid NativeValueWithERC
    /// @param tokenId Token to deposit
    /// @param amount Amount to deposit
    /// @param isNative Wether the token is native or ERC20
    function depositAsset(
        address tokenId,
        uint256 amount,
        bool isNative
    ) internal {
        if (amount == 0) revert InvalidAmount();
        if (isNative) {
            if (msg.value != amount) revert InvalidAmount();
        } else {
            if (msg.value != 0) revert NativeValueWithERC();
            uint256 _fromTokenBalance = LibAsset.getOwnBalance(tokenId);
            LibAsset.transferFromERC20(tokenId, msg.sender, address(this), amount);
            if (LibAsset.getOwnBalance(tokenId) - _fromTokenBalance != amount) revert InvalidAmount();
        }
    }

    /// @notice Overload for depositAsset(address tokenId, uint256 amount, bool isNative)
    /// @param tokenId Token to deposit
    /// @param amount Amount to deposit
    function depositAsset(address tokenId, uint256 amount) internal {
        return depositAsset(tokenId, amount, tokenId == NATIVE_ASSETID);
    }

    /// @notice Determines whether the given assetId is the native asset
    /// @param assetId The asset identifier to evaluate
    /// @return Boolean indicating if the asset is the native asset
    function isNativeAsset(address assetId) internal pure returns (bool) {
        return assetId == NATIVE_ASSETID;
    }

    /// @notice Wrapper function to transfer a given asset (native or erc20) to
    ///         some recipient. Should handle all non-compliant return value
    ///         tokens as well by using the SafeERC20 contract by open zeppelin.
    /// @param assetId Asset id for transfer (address(0) for native asset,
    ///                token address for erc20s)
    /// @param recipient Address to send asset to
    /// @param amount Amount to send to given recipient
    function transferAsset(
        address assetId,
        address payable recipient,
        uint256 amount
    ) internal {
        (assetId == NATIVE_ASSETID)
            ? transferNativeAsset(recipient, amount)
            : transferERC20(assetId, recipient, amount);
    }

    /// @dev Checks whether the given address is a contract and contains code
    function isContract(address _contractAddr) internal view returns (bool) {
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(_contractAddr)
        }
        return size > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { LibAsset, IERC20 } from "./LibAsset.sol";
import { LibUtil } from "./LibUtil.sol";
import { InvalidContract } from "../Errors/GenericErrors.sol";

library LibSwap {
    error NoSwapFromZeroBalance();

    struct SwapData {
        address callTo;
        address approveTo;
        address sendingAssetId;
        address receivingAssetId;
        uint256 fromAmount;
        bytes callData;
    }

    event AssetSwapped(
        bytes32 transactionId,
        address dex,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount,
        uint256 timestamp
    );

    function swap(bytes32 transactionId, SwapData calldata _swapData) internal {
        if (!LibAsset.isContract(_swapData.callTo)) revert InvalidContract();
        uint256 fromAmount = _swapData.fromAmount;
        if (fromAmount == 0) revert NoSwapFromZeroBalance();
        uint256 nativeValue = 0;
        address fromAssetId = _swapData.sendingAssetId;
        address toAssetId = _swapData.receivingAssetId;
        uint256 initialSendingAssetBalance = LibAsset.getOwnBalance(fromAssetId);
        uint256 initialReceivingAssetBalance = LibAsset.getOwnBalance(toAssetId);
        uint256 toDeposit = initialSendingAssetBalance < fromAmount ? fromAmount - initialSendingAssetBalance : 0;

        if (!LibAsset.isNativeAsset(fromAssetId)) {
            LibAsset.maxApproveERC20(IERC20(fromAssetId), _swapData.approveTo, fromAmount);
            if (toDeposit != 0) {
                LibAsset.transferFromERC20(fromAssetId, msg.sender, address(this), toDeposit);
            }
        } else {
            nativeValue = fromAmount;
        }

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = _swapData.callTo.call{ value: nativeValue }(_swapData.callData);
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }

        uint256 newBalance = LibAsset.getOwnBalance(toAssetId);

        emit AssetSwapped(
            transactionId,
            _swapData.callTo,
            _swapData.sendingAssetId,
            toAssetId,
            fromAmount,
            newBalance > initialReceivingAssetBalance ? newBalance - initialReceivingAssetBalance : newBalance,
            block.timestamp
        );
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.13;

/// @title Reentrancy Guard
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide protection against reentrancy
abstract contract ReentrancyGuard {
    /// Storage ///

    bytes32 private constant NAMESPACE = hex"a65bb2f450488ab0858c00edc14abc5297769bf42adb48cfb77752890e8b697b";

    /// Types ///

    struct ReentrancyStorage {
        uint256 status;
    }

    /// Errors ///

    error ReentrancyError();

    /// Constants ///

    uint256 private constant _NOT_ENTERED = 0;
    uint256 private constant _ENTERED = 1;

    /// Modifiers ///

    modifier nonReentrant() {
        ReentrancyStorage storage s = reentrancyStorage();
        if (s.status == _ENTERED) revert ReentrancyError();
        s.status = _ENTERED;
        _;
        s.status = _NOT_ENTERED;
    }

    /// Private Methods ///

    /// @dev fetch local storage
    function reentrancyStorage() private pure returns (ReentrancyStorage storage data) {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            data.slot := position
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

error InvalidAmount();
error TokenAddressIsZero();
error CannotBridgeToSameNetwork();
error ZeroPostSwapBalance();
error InvalidBridgeConfigLength();
error NoSwapDataProvided();
error NativeValueWithERC();
error ContractCallNotAllowed();
error NullAddrIsNotAValidSpender();
error NullAddrIsNotAnERC20Token();
error NoTransferToNullAddress();
error NativeAssetTransferFailed();
error InvalidContract();
error InvalidConfig();

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibStorage } from "../Libraries/LibStorage.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { InvalidAmount, ContractCallNotAllowed, NoSwapDataProvided } from "../Errors/GenericErrors.sol";

/// @title Swapper
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide swap functionality
contract Swapper is ILiFi {
    /// Storage ///

    LibStorage internal appStorage;

    /// Modifiers ///

    /// @dev Sends any leftover balances back to the user
    modifier noLeftovers(LibSwap.SwapData[] calldata _swapData) {
        uint256 nSwaps = _swapData.length;
        if (nSwaps != 1) {
            uint256[] memory initialBalances = _fetchBalances(_swapData);
            address finalAsset = _swapData[nSwaps - 1].receivingAssetId;
            uint256 curBalance = 0;

            _;

            for (uint256 i = 0; i < nSwaps - 1; i++) {
                address curAsset = _swapData[i].receivingAssetId;
                if (curAsset == finalAsset) continue; // Handle multi-to-one swaps
                curBalance = LibAsset.getOwnBalance(curAsset) - initialBalances[i];
                if (curBalance > 0) LibAsset.transferAsset(curAsset, payable(msg.sender), curBalance);
            }
        } else _;
    }

    /// Internal Methods ///

    /// @dev Validates input before executing swaps
    /// @param _lifiData LiFi tracking data
    /// @param _swapData Array of data used to execute swaps
    function _executeAndCheckSwaps(LiFiData memory _lifiData, LibSwap.SwapData[] calldata _swapData)
        internal
        returns (uint256)
    {
        uint256 nSwaps = _swapData.length;
        if (nSwaps == 0) revert NoSwapDataProvided();
        address finalTokenId = _swapData[_swapData.length - 1].receivingAssetId;
        uint256 swapBalance = LibAsset.getOwnBalance(finalTokenId);
        _executeSwaps(_lifiData, _swapData);
        uint256 newBalance = LibAsset.getOwnBalance(finalTokenId);
        swapBalance = newBalance > swapBalance ? newBalance - swapBalance : newBalance;
        if (swapBalance == 0) revert InvalidAmount();
        return swapBalance;
    }

    /// Private Methods ///

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _lifiData LiFi tracking data
    /// @param _swapData Array of data used to execute swaps
    function _executeSwaps(LiFiData memory _lifiData, LibSwap.SwapData[] calldata _swapData)
        private
        noLeftovers(_swapData)
    {
        for (uint256 i = 0; i < _swapData.length; i++) {
            LibSwap.SwapData calldata currentSwapData = _swapData[i];
            if (
                !(appStorage.dexAllowlist[currentSwapData.approveTo] &&
                    appStorage.dexAllowlist[currentSwapData.callTo] &&
                    appStorage.dexFuncSignatureAllowList[bytes32(currentSwapData.callData[:8])])
            ) revert ContractCallNotAllowed();
            LibSwap.swap(_lifiData.transactionId, currentSwapData);
        }
    }

    /// @dev Fetches balances of tokens to be swapped before swapping.
    /// @param _swapData Array of data used to execute swaps
    /// @return uint256[] Array of token balances.
    function _fetchBalances(LibSwap.SwapData[] calldata _swapData) private view returns (uint256[] memory) {
        uint256 length = _swapData.length;
        uint256[] memory balances = new uint256[](length);
        for (uint256 i = 0; i < length; i++) {
            address asset = _swapData[i].receivingAssetId;
            uint256 balance = LibAsset.getOwnBalance(asset);
            if (LibAsset.isNativeAsset(asset)) {
                balances[i] = balance - msg.value;
            } else {
                balances[i] = balance;
            }
        }
        return balances;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface IDiamondCut {
    enum FacetCutAction {
        Add,
        Replace,
        Remove
    }
    // Add=0, Replace=1, Remove=2

    struct FacetCut {
        address facetAddress;
        FacetCutAction action;
        bytes4[] functionSelectors;
    }

    /// @notice Add/replace/remove any number of functions and optionally execute
    ///         a function with delegatecall
    /// @param _diamondCut Contains the facet addresses and function selectors
    /// @param _init The address of the contract or facet to execute _calldata
    /// @param _calldata A function call, including function selector and arguments
    ///                  _calldata is executed with delegatecall on _init
    function diamondCut(
        FacetCut[] calldata _diamondCut,
        address _init,
        bytes calldata _calldata
    ) external;

    event DiamondCut(FacetCut[] _diamondCut, address _init, bytes _calldata);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import "./LibBytes.sol";

library LibUtil {
    using LibBytes for bytes;

    function getRevertMsg(bytes memory _res) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

library LibBytes {
    // solhint-disable no-inline-assembly

    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        // solhint-disable-next-line no-empty-blocks
                        for {

                        } eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

struct LibStorage {
    mapping(address => bool) dexAllowlist;
    mapping(bytes32 => bool) dexFuncSignatureAllowList;
    address[] dexs;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"ContractCallNotAllowed","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidContract","type":"error"},{"inputs":[],"name":"NativeAssetTransferFailed","type":"error"},{"inputs":[],"name":"NativeValueWithERC","type":"error"},{"inputs":[],"name":"NoSwapDataProvided","type":"error"},{"inputs":[],"name":"NoSwapFromZeroBalance","type":"error"},{"inputs":[],"name":"NoTransferToNullAddress","type":"error"},{"inputs":[],"name":"NullAddrIsNotAValidSpender","type":"error"},{"inputs":[],"name":"NullAddrIsNotAnERC20Token","type":"error"},{"inputs":[],"name":"ReentrancyError","type":"error"},{"inputs":[],"name":"UseWethInstead","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"weth","type":"address"},{"indexed":false,"internalType":"address","name":"spokePool","type":"address"}],"name":"AcrossInitialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"LiFiTransferCompleted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"string","name":"bridge","type":"string"},{"indexed":false,"internalType":"string","name":"bridgeData","type":"string"},{"indexed":false,"internalType":"string","name":"integrator","type":"string"},{"indexed":false,"internalType":"address","name":"referrer","type":"address"},{"indexed":false,"internalType":"address","name":"sendingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"indexed":false,"internalType":"bool","name":"hasSourceSwap","type":"bool"},{"indexed":false,"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"name":"LiFiTransferStarted","type":"event"},{"inputs":[{"internalType":"address","name":"_weth","type":"address"},{"internalType":"address","name":"_spokePool","type":"address"}],"name":"initAcross","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_spokePool","type":"address"}],"name":"setSpokePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_weth","type":"address"}],"name":"setWeth","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ILiFi.LiFiData","name":"_lifiData","type":"tuple"},{"components":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint64","name":"relayerFeePct","type":"uint64"},{"internalType":"uint32","name":"quoteTimestamp","type":"uint32"}],"internalType":"struct AcrossFacet.AcrossData","name":"_acrossData","type":"tuple"}],"name":"startBridgeTokensViaAcross","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ILiFi.LiFiData","name":"_lifiData","type":"tuple"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"}],"internalType":"struct LibSwap.SwapData[]","name":"_swapData","type":"tuple[]"},{"components":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint64","name":"relayerFeePct","type":"uint64"},{"internalType":"uint32","name":"quoteTimestamp","type":"uint32"}],"internalType":"struct AcrossFacet.AcrossData","name":"_acrossData","type":"tuple"}],"name":"swapAndStartBridgeTokensViaAcross","outputs":[],"stateMutability":"payable","type":"function"}]

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