Contract 0x53d392646fab3cae0a08ead31f8b5cbfff55b818 2

/**
 *Submitted for verification at polygonscan.com on 2021-12-17
*/

// SPDX-License-Identifier: None
pragma solidity 0.6.12;


/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


interface IBEP20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


contract BEP20 is Context, IBEP20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external override view returns (address) {
        return owner();
    }

    /**
     * @dev Returns the token name.
     */
    function name() public override view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token decimals.
     */
    function decimals() public override view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev Returns the token symbol.
     */
    function symbol() public override view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {BEP20-totalSupply}.
     */
    function totalSupply() public override view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {BEP20-balanceOf}.
     */
    function balanceOf(address account) public override view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {BEP20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {BEP20-allowance}.
     */
    function allowance(address owner, address spender) public override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {BEP20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {BEP20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {BEP20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance")
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {BEP20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {BEP20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero")
        );
        return true;
    }

    /**
     * @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
     * the total supply.
     *
     * Requirements
     *
     * - `msg.sender` must be the token owner
     */
    function mint(uint256 amount) public onlyOwner returns (bool) {
        _mint(_msgSender(), amount);
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "BEP20: transfer from the zero address");
        require(recipient != address(0), "BEP20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "BEP20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal {
        require(account != address(0), "BEP20: burn from the zero address");

        _balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal {
        require(owner != address(0), "BEP20: approve from the zero address");
        require(spender != address(0), "BEP20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See {_burn} and {_approve}.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(
            account,
            _msgSender(),
            _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance")
        );
    }
}

// SalemWitch.

contract SalemWitch is BEP20('Salem Finance', 'SALEM') {
    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (SalemChef).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
    }
}


/**
 * @title SafeBEP20
 * @dev Wrappers around BEP20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeBEP20 for IBEP20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeBEP20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IBEP20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IBEP20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IBEP20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IBEP20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeBEP20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IBEP20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IBEP20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeBEP20: decreased allowance below zero"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IBEP20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeBEP20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeBEP20: BEP20 operation did not succeed");
        }
    }
}

// SalemChef is the master of SALEM. He can make Salem and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once SALEM is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract SalemChef is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeBEP20 for IBEP20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;         // How many LP tokens the user has provided.
        uint256 rewardDebt;     // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of SALEM
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accSalemPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accSalemPerShare` (and `lastRewardSecond`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IBEP20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool.
        uint256 lastRewardSecond;  // Last second that SALEMs distribution occurs.
        uint256 accSalemPerShare;   // Accumulated SALEMs per share, times 1e18. See below.
        uint16 depositFeeBP;      // Deposit fee in basis points
        uint256 lpSupply;
    }

    // The SALEM TOKEN!
    SalemWitch public immutable salem;
    // Dev address.
    address public devaddr;
    // SALEM tokens created per second.
    uint256 public salemPerSecond;
    // Deposit Fee address
    address public feeAddress;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;
    // Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block timestamp when Salem mining starts.
    uint256 public startTime;

    // Maximum SalemPerTime
    uint256 public constant MAX_EMISSION_RATE = 500000000000000000;


    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event SetFeeAddress(address indexed user, address indexed newAddress);
    event SetDevAddress(address indexed user, address indexed newAddress);
    event UpdateEmissionRate(address indexed user, uint256 SalemPerSecond);
    event addPool(uint256 indexed pid, address lpToken, uint256 allocPoint, uint256 depositFeeBP);
    event setPool(uint256 indexed pid, address lpToken, uint256 allocPoint, uint256 depositFeeBP);
    event UpdateStartTime(uint256 newStartTime);
    event SalemMintError(bytes reason);

    constructor(
        SalemWitch _salem,
        address _devaddr,
        address _feeAddress,
        uint256 _SalemPerTime,
        uint256 _startTime
    ) public {
        salem = _salem;
        devaddr = _devaddr;
        feeAddress = _feeAddress;
        salemPerSecond = _SalemPerTime;
        startTime = _startTime;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    mapping(IBEP20 => bool) public poolExistence;
    modifier nonDuplicated(IBEP20 _lpToken) {
        require(poolExistence[_lpToken] == false, "nonDuplicated: duplicated");
        _;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    function add(uint256 _allocPoint, IBEP20 _lpToken, uint16 _depositFeeBP, bool _withUpdate) external onlyOwner nonDuplicated(_lpToken) {
        // valid ERC20 token
        _lpToken.balanceOf(address(this));

        require(_depositFeeBP <= 400, "add: invalid deposit fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardSecond = block.timestamp > startTime ? block.timestamp : startTime;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolExistence[_lpToken] = true;
        poolInfo.push(
            PoolInfo({
                lpToken : _lpToken,
                allocPoint : _allocPoint,
                lastRewardSecond : lastRewardSecond,
                accSalemPerShare : 0,
                depositFeeBP : _depositFeeBP,
                lpSupply: 0
            })
        );

        emit addPool(poolInfo.length - 1, address(_lpToken), _allocPoint, _depositFeeBP);
    }

    // Update the given pool's SALEM allocation point and deposit fee. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, uint16 _depositFeeBP, bool _withUpdate) external onlyOwner {
        require(_depositFeeBP <= 400, "set: invalid deposit fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
        poolInfo[_pid].depositFeeBP = _depositFeeBP;

        emit setPool(_pid, address(poolInfo[_pid].lpToken), _allocPoint, _depositFeeBP);
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to) public pure returns (uint256) {
        return _to.sub(_from);
    }

    // View function to see pending Salems on frontend.
    function pendingSalem(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accSalemPerShare = pool.accSalemPerShare;
        if (block.timestamp > pool.lastRewardSecond && pool.lpSupply != 0 && totalAllocPoint > 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardSecond, block.timestamp);
            uint256 salemReward = multiplier.mul(salemPerSecond).mul(pool.allocPoint).div(totalAllocPoint);
            accSalemPerShare = accSalemPerShare.add(salemReward.mul(1e18).div(pool.lpSupply));
        }
        return user.amount.mul(accSalemPerShare).div(1e18).sub(user.rewardDebt);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.timestamp <= pool.lastRewardSecond) {
            return;
        }
        if (pool.lpSupply == 0 || pool.allocPoint == 0) {
            pool.lastRewardSecond = block.timestamp;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardSecond, block.timestamp);
        uint256 salemReward = multiplier.mul(salemPerSecond).mul(pool.allocPoint).div(totalAllocPoint);
        
        try salem.mint(devaddr, salemReward.div(10)) {
        } catch (bytes memory reason) {
            salemReward = 0;
            emit SalemMintError(reason);
        }
        
        try salem.mint(address(this), salemReward) {
        } catch (bytes memory reason) {
            salemReward = 0;
            emit SalemMintError(reason);
        }
        
        pool.accSalemPerShare = pool.accSalemPerShare.add(salemReward.mul(1e18).div(pool.lpSupply));
        pool.lastRewardSecond = block.timestamp;
    }
    
    // Deposit LP tokens to MasterChef for SALEM allocation.
    function deposit(uint256 _pid, uint256 _amount) external nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accSalemPerShare).div(1e18).sub(user.rewardDebt);
            if (pending > 0) {
                safeSalemTransfer(msg.sender, pending);
            }
        }
        if (_amount > 0) {
            uint256 balanceBefore = pool.lpToken.balanceOf(address(this));
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
            _amount = pool.lpToken.balanceOf(address(this)).sub(balanceBefore);
            if (pool.depositFeeBP > 0) {
                uint256 depositFee = _amount.mul(pool.depositFeeBP).div(10000);
                pool.lpToken.safeTransfer(feeAddress, depositFee);
                user.amount = user.amount.add(_amount).sub(depositFee);
                pool.lpSupply = pool.lpSupply.add(_amount).sub(depositFee);
            } else {
                user.amount = user.amount.add(_amount);
                pool.lpSupply = pool.lpSupply.add(_amount);
            }
        }
        user.rewardDebt = user.amount.mul(pool.accSalemPerShare).div(1e18);
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from SalemChef.
    function withdraw(uint256 _pid, uint256 _amount) external nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accSalemPerShare).div(1e18).sub(user.rewardDebt);
        if (pending > 0) {
            safeSalemTransfer(msg.sender, pending);
        }
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
            pool.lpSupply = pool.lpSupply.sub(_amount);
        }
        user.rewardDebt = user.amount.mul(pool.accSalemPerShare).div(1e18);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) external nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.lpToken.safeTransfer(address(msg.sender), amount);

        if (pool.lpSupply >=  amount) {
            pool.lpSupply = pool.lpSupply.sub(amount);
        } else {
            pool.lpSupply = 0;
        }

        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    // Safe salem transfer function, just in case if rounding error causes pool to not have enough SALEMs.
    function safeSalemTransfer(address _to, uint256 _amount) internal {
        uint256 salemBal = salem.balanceOf(address(this));
        bool transferSuccess = false;
        if (_amount > salemBal) {
            transferSuccess = salem.transfer(_to, salemBal);
        } else {
            transferSuccess = salem.transfer(_to, _amount);
        }
        require(transferSuccess, "safeSalemTransfer: transfer failed");
    }

    // Update dev address.
    function setDevAddress(address _devaddr) external {
        require(msg.sender == devaddr, "dev: wut?");
        require(_devaddr != address(0), "!nonzero");

        devaddr = _devaddr;
        emit SetDevAddress(msg.sender, _devaddr);
    }

    function setFeeAddress(address _feeAddress) external {
        require(msg.sender == feeAddress, "setFeeAddress: FORBIDDEN");
        require(_feeAddress != address(0), "!nonzero");
        feeAddress = _feeAddress;
        emit SetFeeAddress(msg.sender, _feeAddress);
    }

 // Pancake has to add hidden dummy pools inorder to alter the emission, here we make it simple and transparent to all.
    function updateEmissionRate(uint256 _salemPerSecond) external onlyOwner {
        require(_salemPerSecond <= MAX_EMISSION_RATE, "Too high");
        massUpdatePools();
        salemPerSecond = _salemPerSecond;
        emit UpdateEmissionRate(msg.sender, _salemPerSecond);
    }

    // Only update before start of farm
    function updateStartTime(uint256 _newStartTime) external onlyOwner {
        require(block.timestamp < startTime, "cannot change start time if farm has already started");
        require(block.timestamp < _newStartTime, "cannot set start time in the past");
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            PoolInfo storage pool = poolInfo[pid];
            pool.lastRewardSecond = _newStartTime;
        }
        startTime = _newStartTime;

        emit UpdateStartTime(startTime);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract SalemWitch","name":"_salem","type":"address"},{"internalType":"address","name":"_devaddr","type":"address"},{"internalType":"address","name":"_feeAddress","type":"address"},{"internalType":"uint256","name":"_SalemPerTime","type":"uint256"},{"internalType":"uint256","name":"_startTime","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes","name":"reason","type":"bytes"}],"name":"SalemMintError","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetDevAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetFeeAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"SalemPerSecond","type":"uint256"}],"name":"UpdateEmissionRate","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newStartTime","type":"uint256"}],"name":"UpdateStartTime","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"address","name":"lpToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"allocPoint","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"depositFeeBP","type":"uint256"}],"name":"addPool","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"address","name":"lpToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"allocPoint","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"depositFeeBP","type":"uint256"}],"name":"setPool","type":"event"},{"inputs":[],"name":"MAX_EMISSION_RATE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IBEP20","name":"_lpToken","type":"address"},{"internalType":"uint16","name":"_depositFeeBP","type":"uint16"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devaddr","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"feeAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_from","type":"uint256"},{"internalType":"uint256","name":"_to","type":"uint256"}],"name":"getMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingSalem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IBEP20","name":"","type":"address"}],"name":"poolExistence","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IBEP20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardSecond","type":"uint256"},{"internalType":"uint256","name":"accSalemPerShare","type":"uint256"},{"internalType":"uint16","name":"depositFeeBP","type":"uint16"},{"internalType":"uint256","name":"lpSupply","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"salem","outputs":[{"internalType":"contract SalemWitch","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"salemPerSecond","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"uint16","name":"_depositFeeBP","type":"uint16"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_devaddr","type":"address"}],"name":"setDevAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_feeAddress","type":"address"}],"name":"setFeeAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_salemPerSecond","type":"uint256"}],"name":"updateEmissionRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newStartTime","type":"uint256"}],"name":"updateStartTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

60a060405260006007553480156200001657600080fd5b506040516200397b3803806200397b833981810160405260a08110156200003c57600080fd5b810190808051906020019092919080519060200190929190805190602001909291908051906020019092919080519060200190929190505050600062000087620001fe60201b60201c565b9050806000806101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055508073ffffffffffffffffffffffffffffffffffffffff16600073ffffffffffffffffffffffffffffffffffffffff167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e060405160405180910390a350600180819055508473ffffffffffffffffffffffffffffffffffffffff1660808173ffffffffffffffffffffffffffffffffffffffff1660601b8152505083600260006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff16021790555082600460006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055508160038190555080600881905550505050505062000206565b600033905090565b60805160601c61373e6200023d60003980610fbb528061116f52806122a35280612d6c5280612e3a5280612f0d525061373e6000f3fe608060405234801561001057600080fd5b50600436106101a95760003560e01c806384e82a33116100f9578063d0d41fe111610097578063db97d9ee11610071578063db97d9ee146106b4578063e2bbb158146106e8578063ec5ba98714610720578063f2fde38b14610782576101a9565b8063d0d41fe1146105ea578063d49e77cd1461062e578063d963842214610662576101a9565b80638dbb1e3a116100d35780638dbb1e3a146104bd57806393f1a40b14610509578063c8ee2c9414610572578063cbd258b514610590576101a9565b806384e82a33146103dd5780638705fcd4146104455780638da5cb5b14610489576101a9565b8063436cc3d6116101665780635312ea8e116101405780635312ea8e1461037d578063630b5ba1146103ab578063715018a6146103b557806378e97925146103bf576101a9565b8063436cc3d6146102f9578063441a3e701461031757806351eb05a61461034f576101a9565b806306bcf02f146101ae578063081e3eda146101dc5780630ba84cd2146101fa5780631526fe271461022857806317caf6f1146102a757806341275358146102c5575b600080fd5b6101da600480360360208110156101c457600080fd5b81019080803590602001909291905050506107c6565b005b6101e46109b5565b6040518082815260200191505060405180910390f35b6102266004803603602081101561021057600080fd5b81019080803590602001909291905050506109c2565b005b6102546004803603602081101561023e57600080fd5b8101908080359060200190929190505050610b4f565b604051808773ffffffffffffffffffffffffffffffffffffffff1681526020018681526020018581526020018481526020018361ffff168152602001828152602001965050505050505060405180910390f35b6102af610bc6565b6040518082815260200191505060405180910390f35b6102cd610bcc565b604051808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060405180910390f35b610301610bf2565b6040518082815260200191505060405180910390f35b61034d6004803603604081101561032d57600080fd5b810190808035906020019092919080359060200190929190505050610bfe565b005b61037b6004803603602081101561036557600080fd5b8101908080359060200190929190505050610f09565b005b6103a96004803603602081101561039357600080fd5b810190808035906020019092919050505061134b565b005b6103b3611541565b005b6103bd61156e565b005b6103c76116db565b6040518082815260200191505060405180910390f35b610443600480360360808110156103f357600080fd5b8101908080359060200190929190803573ffffffffffffffffffffffffffffffffffffffff169060200190929190803561ffff1690602001909291908035151590602001909291905050506116e1565b005b6104876004803603602081101561045b57600080fd5b81019080803573ffffffffffffffffffffffffffffffffffffffff169060200190929190505050611b6c565b005b610491611d70565b604051808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060405180910390f35b6104f3600480360360408110156104d357600080fd5b810190808035906020019092919080359060200190929190505050611d99565b6040518082815260200191505060405180910390f35b6105556004803603604081101561051f57600080fd5b8101908080359060200190929190803573ffffffffffffffffffffffffffffffffffffffff169060200190929190505050611db6565b604051808381526020018281526020019250505060405180910390f35b61057a611de7565b6040518082815260200191505060405180910390f35b6105d2600480360360208110156105a657600080fd5b81019080803573ffffffffffffffffffffffffffffffffffffffff169060200190929190505050611ded565b60405180821515815260200191505060405180910390f35b61062c6004803603602081101561060057600080fd5b81019080803573ffffffffffffffffffffffffffffffffffffffff169060200190929190505050611e0d565b005b610636612011565b604051808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060405180910390f35b6106b26004803603608081101561067857600080fd5b810190808035906020019092919080359060200190929190803561ffff169060200190929190803515159060200190929190505050612037565b005b6106bc6122a1565b604051808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060405180910390f35b61071e600480360360408110156106fe57600080fd5b8101908080359060200190929190803590602001909291905050506122c5565b005b61076c6004803603604081101561073657600080fd5b8101908080359060200190929190803573ffffffffffffffffffffffffffffffffffffffff169060200190929190505050612845565b6040518082815260200191505060405180910390f35b6107c46004803603602081101561079857600080fd5b81019080803573ffffffffffffffffffffffffffffffffffffffff1690602001909291905050506129dc565b005b6107ce612bce565b73ffffffffffffffffffffffffffffffffffffffff166107ec611d70565b73ffffffffffffffffffffffffffffffffffffffff1614610875576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260208152602001807f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657281525060200191505060405180910390fd5b60085442106108cf576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252603481526020018061366d6034913960400191505060405180910390fd5b804210610927576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602181526020018061364c6021913960400191505060405180910390fd5b6000600580549050905060005b818110156109705760006005828154811061094b57fe5b9060005260206000209060060201905083816002018190555050806001019050610934565b50816008819055507fa09018266c541576eb124551c9c57c82a8129add3ba6777a5974b1d0e6252e996008546040518082815260200191505060405180910390a15050565b6000600580549050905090565b6109ca612bce565b73ffffffffffffffffffffffffffffffffffffffff166109e8611d70565b73ffffffffffffffffffffffffffffffffffffffff1614610a71576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260208152602001807f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657281525060200191505060405180910390fd5b6706f05b59d3b20000811115610aef576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260088152602001807f546f6f206869676800000000000000000000000000000000000000000000000081525060200191505060405180910390fd5b610af7611541565b806003819055503373ffffffffffffffffffffffffffffffffffffffff167fe2492e003bbe8afa53088b406f0c1cb5d9e280370fc72a74cf116ffd343c4053826040518082815260200191505060405180910390a250565b60058181548110610b5c57fe5b90600052602060002090600602016000915090508060000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16908060010154908060020154908060030154908060040160009054906101000a900461ffff16908060050154905086565b60075481565b600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1681565b6706f05b59d3b2000081565b60026001541415610c77576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601f8152602001807f5265656e7472616e637947756172643a207265656e7472616e742063616c6c0081525060200191505060405180910390fd5b6002600181905550600060058381548110610c8e57fe5b9060005260206000209060060201905060006006600085815260200190815260200160002060003373ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16815260200190815260200160002090508281600001541015610d6c576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260128152602001807f77697468647261773a206e6f7420676f6f64000000000000000000000000000081525060200191505060405180910390fd5b610d7584610f09565b6000610dc28260010154610db4670de0b6b3a7640000610da687600301548760000154612bd690919063ffffffff16565b612c5c90919063ffffffff16565b612ce590919063ffffffff16565b90506000811115610dd857610dd73382612d68565b5b6000841115610e6f57610df8848360000154612ce590919063ffffffff16565b8260000181905550610e4f33858560000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff166130369092919063ffffffff16565b610e66848460050154612ce590919063ffffffff16565b83600501819055505b610ea4670de0b6b3a7640000610e9685600301548560000154612bd690919063ffffffff16565b612c5c90919063ffffffff16565b8260010181905550843373ffffffffffffffffffffffffffffffffffffffff167ff279e6a1f5e320cca91135676d9cb6e44ca8a08c0b88342bcdb1144f6511b568866040518082815260200191505060405180910390a3505050600180819055505050565b600060058281548110610f1857fe5b9060005260206000209060060201905080600201544211610f395750611348565b600081600501541480610f50575060008160010154145b15610f645742816002018190555050611348565b6000610f74826002015442611d99565b90506000610fb7600754610fa98560010154610f9b60035487612bd690919063ffffffff16565b612bd690919063ffffffff16565b612c5c90919063ffffffff16565b90507f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff166340c10f19600260009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1661102c600a85612c5c90919063ffffffff16565b6040518363ffffffff1660e01b8152600401808373ffffffffffffffffffffffffffffffffffffffff16815260200182815260200192505050600060405180830381600087803b15801561107f57600080fd5b505af1925050508015611090575060015b61116c573d80600081146110c0576040519150601f19603f3d011682016040523d82523d6000602084013e6110c5565b606091505b50600091507fda78edacb4a9ef90bec26b2dae6063d6aa5b2b49e7c196abf6bb417a655bd7c9816040518080602001828103825283818151815260200191508051906020019080838360005b8381101561112c578082015181840152602081019050611111565b50505050905090810190601f1680156111595780820380516001836020036101000a031916815260200191505b509250505060405180910390a15061116d565b5b7f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff166340c10f1930836040518363ffffffff1660e01b8152600401808373ffffffffffffffffffffffffffffffffffffffff16815260200182815260200192505050600060405180830381600087803b1580156111fe57600080fd5b505af192505050801561120f575060015b6112eb573d806000811461123f576040519150601f19603f3d011682016040523d82523d6000602084013e611244565b606091505b50600091507fda78edacb4a9ef90bec26b2dae6063d6aa5b2b49e7c196abf6bb417a655bd7c9816040518080602001828103825283818151815260200191508051906020019080838360005b838110156112ab578082015181840152602081019050611290565b50505050905090810190601f1680156112d85780820380516001836020036101000a031916815260200191505b509250505060405180910390a1506112ec565b5b6113336113208460050154611312670de0b6b3a764000085612bd690919063ffffffff16565b612c5c90919063ffffffff16565b84600301546130d890919063ffffffff16565b83600301819055504283600201819055505050505b50565b600260015414156113c4576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601f8152602001807f5265656e7472616e637947756172643a207265656e7472616e742063616c6c0081525060200191505060405180910390fd5b60026001819055506000600582815481106113db57fe5b9060005260206000209060060201905060006006600084815260200190815260200160002060003373ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff168152602001908152602001600020905060008160000154905060008260000181905550600082600101819055506114ab33828560000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff166130369092919063ffffffff16565b808360050154106114da576114cd818460050154612ce590919063ffffffff16565b83600501819055506114e5565b600083600501819055505b833373ffffffffffffffffffffffffffffffffffffffff167fbb757047c2b5f3974fe26b7c10f732e7bce710b0952a71082702781e62ae0595836040518082815260200191505060405180910390a35050506001808190555050565b6000600580549050905060005b8181101561156a5761155f81610f09565b80600101905061154e565b5050565b611576612bce565b73ffffffffffffffffffffffffffffffffffffffff16611594611d70565b73ffffffffffffffffffffffffffffffffffffffff161461161d576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260208152602001807f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657281525060200191505060405180910390fd5b600073ffffffffffffffffffffffffffffffffffffffff1660008054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e060405160405180910390a360008060006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff160217905550565b60085481565b6116e9612bce565b73ffffffffffffffffffffffffffffffffffffffff16611707611d70565b73ffffffffffffffffffffffffffffffffffffffff1614611790576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260208152602001807f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657281525060200191505060405180910390fd5b8260001515600960008373ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16815260200190815260200160002060009054906101000a900460ff16151514611857576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260198152602001807f6e6f6e4475706c6963617465643a206475706c6963617465640000000000000081525060200191505060405180910390fd5b8373ffffffffffffffffffffffffffffffffffffffff166370a08231306040518263ffffffff1660e01b8152600401808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060206040518083038186803b1580156118be57600080fd5b505afa1580156118d2573d6000803e3d6000fd5b505050506040513d60208110156118e857600080fd5b8101908080519060200190929190505050506101908361ffff161115611959576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260258152602001806135b16025913960400191505060405180910390fd5b811561196857611967611541565b5b6000600854421161197b5760085461197d565b425b9050611994866007546130d890919063ffffffff16565b6007819055506001600960008773ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16815260200190815260200160002060006101000a81548160ff02191690831515021790555060056040518060c001604052808773ffffffffffffffffffffffffffffffffffffffff168152602001888152602001838152602001600081526020018661ffff1681526020016000815250908060018154018082558091505060019003906000526020600020906006020160009091909190915060008201518160000160006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff16021790555060208201518160010155604082015181600201556060820151816003015560808201518160040160006101000a81548161ffff021916908361ffff16021790555060a0820151816005015550506001600580549050037faa6642278d4bbef86d8990c37355d5d4dfe365c194106bdf7a65162268606f07868887604051808473ffffffffffffffffffffffffffffffffffffffff1681526020018381526020018261ffff168152602001935050505060405180910390a2505050505050565b600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff163373ffffffffffffffffffffffffffffffffffffffff1614611c2f576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260188152602001807f736574466565416464726573733a20464f5242494444454e000000000000000081525060200191505060405180910390fd5b600073ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff161415611cd2576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260088152602001807f216e6f6e7a65726f00000000000000000000000000000000000000000000000081525060200191505060405180910390fd5b80600460006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055508073ffffffffffffffffffffffffffffffffffffffff163373ffffffffffffffffffffffffffffffffffffffff167fd44190acf9d04bdb5d3a1aafff7e6dee8b40b93dfb8c5d3f0eea4b9f4539c3f760405160405180910390a350565b60008060009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16905090565b6000611dae8383612ce590919063ffffffff16565b905092915050565b6006602052816000526040600020602052806000526040600020600091509150508060000154908060010154905082565b60035481565b60096020528060005260406000206000915054906101000a900460ff1681565b600260009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff163373ffffffffffffffffffffffffffffffffffffffff1614611ed0576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260098152602001807f6465763a207775743f000000000000000000000000000000000000000000000081525060200191505060405180910390fd5b600073ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff161415611f73576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260088152602001807f216e6f6e7a65726f00000000000000000000000000000000000000000000000081525060200191505060405180910390fd5b80600260006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055508073ffffffffffffffffffffffffffffffffffffffff163373ffffffffffffffffffffffffffffffffffffffff167f618c54559e94f1499a808aad71ee8729f8e74e8c48e979616328ce493a1a52e760405160405180910390a350565b600260009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1681565b61203f612bce565b73ffffffffffffffffffffffffffffffffffffffff1661205d611d70565b73ffffffffffffffffffffffffffffffffffffffff16146120e6576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260208152602001807f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657281525060200191505060405180910390fd5b6101908261ffff161115612145576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260258152602001806136e46025913960400191505060405180910390fd5b801561215457612153611541565b5b6121998361218b6005878154811061216857fe5b906000526020600020906006020160010154600754612ce590919063ffffffff16565b6130d890919063ffffffff16565b60078190555082600585815481106121ad57fe5b90600052602060002090600602016001018190555081600585815481106121d057fe5b906000526020600020906006020160040160006101000a81548161ffff021916908361ffff160217905550837f39f0c3d078af018954b4fa56832a05a2b511afaa999b133ea3f1c487c21ed2876005868154811061222a57fe5b906000526020600020906006020160000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff168585604051808473ffffffffffffffffffffffffffffffffffffffff1681526020018381526020018261ffff168152602001935050505060405180910390a250505050565b7f000000000000000000000000000000000000000000000000000000000000000081565b6002600154141561233e576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601f8152602001807f5265656e7472616e637947756172643a207265656e7472616e742063616c6c0081525060200191505060405180910390fd5b600260018190555060006005838154811061235557fe5b9060005260206000209060060201905060006006600085815260200190815260200160002060003373ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16815260200190815260200160002090506123c284610f09565b60008160000154111561243457600061241c826001015461240e670de0b6b3a764000061240087600301548760000154612bd690919063ffffffff16565b612c5c90919063ffffffff16565b612ce590919063ffffffff16565b90506000811115612432576124313382612d68565b5b505b60008311156127ac5760008260000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff166370a08231306040518263ffffffff1660e01b8152600401808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060206040518083038186803b1580156124ca57600080fd5b505afa1580156124de573d6000803e3d6000fd5b505050506040513d60208110156124f457600080fd5b810190808051906020019092919050505090506125583330868660000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16613160909392919063ffffffff16565b612630818460000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff166370a08231306040518263ffffffff1660e01b8152600401808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060206040518083038186803b1580156125e757600080fd5b505afa1580156125fb573d6000803e3d6000fd5b505050506040513d602081101561261157600080fd5b8101908080519060200190929190505050612ce590919063ffffffff16565b935060008360040160009054906101000a900461ffff1661ffff16111561276b5760006126906127106126828660040160009054906101000a900461ffff1661ffff1688612bd690919063ffffffff16565b612c5c90919063ffffffff16565b9050612703600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16828660000160009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff166130369092919063ffffffff16565b61272c8161271e8786600001546130d890919063ffffffff16565b612ce590919063ffffffff16565b836000018190555061275d8161274f8787600501546130d890919063ffffffff16565b612ce590919063ffffffff16565b8460050181905550506127aa565b6127828483600001546130d890919063ffffffff16565b82600001819055506127a18484600501546130d890919063ffffffff16565b83600501819055505b505b6127e1670de0b6b3a76400006127d384600301548460000154612bd690919063ffffffff16565b612c5c90919063ffffffff16565b8160010181905550833373ffffffffffffffffffffffffffffffffffffffff167f90890809c654f11d6e72a28fa60149770a0d11ec6c92319d6ceb2bb0a4ea1a15856040518082815260200191505060405180910390a35050600180819055505050565b6000806005848154811061285557fe5b9060005260206000209060060201905060006006600086815260200190815260200160002060008573ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff16815260200190815260200160002090506000826003015490508260020154421180156128da57506000836005015414155b80156128e857506000600754115b1561298a5760006128fd846002015442611d99565b90506000612940600754612932876001015461292460035487612bd690919063ffffffff16565b612bd690919063ffffffff16565b612c5c90919063ffffffff16565b90506129856129768660050154612968670de0b6b3a764000085612bd690919063ffffffff16565b612c5c90919063ffffffff16565b846130d890919063ffffffff16565b925050505b6129d182600101546129c3670de0b6b3a76400006129b5858760000154612bd690919063ffffffff16565b612c5c90919063ffffffff16565b612ce590919063ffffffff16565b935050505092915050565b6129e4612bce565b73ffffffffffffffffffffffffffffffffffffffff16612a02611d70565b73ffffffffffffffffffffffffffffffffffffffff1614612a8b576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260208152602001807f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657281525060200191505060405180910390fd5b600073ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff161415612b11576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260268152602001806136006026913960400191505060405180910390fd5b8073ffffffffffffffffffffffffffffffffffffffff1660008054906101000a900473ffffffffffffffffffffffffffffffffffffffff1673ffffffffffffffffffffffffffffffffffffffff167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e060405160405180910390a3806000806101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff16021790555050565b600033905090565b600080831415612be95760009050612c56565b6000828402905082848281612bfa57fe5b0414612c51576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260218152602001806136c36021913960400191505060405180910390fd5b809150505b92915050565b6000808211612cd3576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601a8152602001807f536166654d6174683a206469766973696f6e206279207a65726f00000000000081525060200191505060405180910390fd5b818381612cdc57fe5b04905092915050565b600082821115612d5d576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601e8152602001807f536166654d6174683a207375627472616374696f6e206f766572666c6f77000081525060200191505060405180910390fd5b818303905092915050565b60007f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff166370a08231306040518263ffffffff1660e01b8152600401808273ffffffffffffffffffffffffffffffffffffffff16815260200191505060206040518083038186803b158015612df157600080fd5b505afa158015612e05573d6000803e3d6000fd5b505050506040513d6020811015612e1b57600080fd5b81019080805190602001909291905050509050600081831115612f0b577f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff1663a9059cbb85846040518363ffffffff1660e01b8152600401808373ffffffffffffffffffffffffffffffffffffffff16815260200182815260200192505050602060405180830381600087803b158015612ec957600080fd5b505af1158015612edd573d6000803e3d6000fd5b505050506040513d6020811015612ef357600080fd5b81019080805190602001909291905050509050612fda565b7f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff1663a9059cbb85856040518363ffffffff1660e01b8152600401808373ffffffffffffffffffffffffffffffffffffffff16815260200182815260200192505050602060405180830381600087803b158015612f9c57600080fd5b505af1158015612fb0573d6000803e3d6000fd5b505050506040513d6020811015612fc657600080fd5b810190808051906020019092919050505090505b80613030576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260228152602001806136a16022913960400191505060405180910390fd5b50505050565b6130d38363a9059cbb60e01b8484604051602401808373ffffffffffffffffffffffffffffffffffffffff16815260200182815260200192505050604051602081830303815290604052907bffffffffffffffffffffffffffffffffffffffffffffffffffffffff19166020820180517bffffffffffffffffffffffffffffffffffffffffffffffffffffffff8381831617835250505050613221565b505050565b600080828401905083811015613156576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601b8152602001807f536166654d6174683a206164646974696f6e206f766572666c6f77000000000081525060200191505060405180910390fd5b8091505092915050565b61321b846323b872dd60e01b858585604051602401808473ffffffffffffffffffffffffffffffffffffffff1681526020018373ffffffffffffffffffffffffffffffffffffffff1681526020018281526020019350505050604051602081830303815290604052907bffffffffffffffffffffffffffffffffffffffffffffffffffffffff19166020820180517bffffffffffffffffffffffffffffffffffffffffffffffffffffffff8381831617835250505050613221565b50505050565b6060613283826040518060400160405280602081526020017f5361666542455032303a206c6f772d6c6576656c2063616c6c206661696c65648152508573ffffffffffffffffffffffffffffffffffffffff166133109092919063ffffffff16565b905060008151111561330b578080602001905160208110156132a457600080fd5b810190808051906020019092919050505061330a576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602a8152602001806135d6602a913960400191505060405180910390fd5b5b505050565b606061331f8484600085613328565b90509392505050565b606082471015613383576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260268152602001806136266026913960400191505060405180910390fd5b61338c856134d1565b6133fe576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252601d8152602001807f416464726573733a2063616c6c20746f206e6f6e2d636f6e747261637400000081525060200191505060405180910390fd5b600060608673ffffffffffffffffffffffffffffffffffffffff1685876040518082805190602001908083835b6020831061344e578051825260208201915060208101905060208303925061342b565b6001836020036101000a03801982511681845116808217855250505050505090500191505060006040518083038185875af1925050503d80600081146134b0576040519150601f19603f3d011682016040523d82523d6000602084013e6134b5565b606091505b50915091506134c58282866134e4565b92505050949350505050565b600080823b905060008111915050919050565b606083156134f4578290506135a9565b6000835111156135075782518084602001fd5b816040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825283818151815260200191508051906020019080838360005b8381101561356e578082015181840152602081019050613553565b50505050905090810190601f16801561359b5780820380516001836020036101000a031916815260200191505b509250505060405180910390fd5b939250505056fe6164643a20696e76616c6964206465706f7369742066656520626173697320706f696e74735361666542455032303a204245503230206f7065726174696f6e20646964206e6f7420737563636565644f776e61626c653a206e6577206f776e657220697320746865207a65726f2061646472657373416464726573733a20696e73756666696369656e742062616c616e636520666f722063616c6c63616e6e6f74207365742073746172742074696d6520696e20746865207061737463616e6e6f74206368616e67652073746172742074696d65206966206661726d2068617320616c726561647920737461727465647361666553616c656d5472616e736665723a207472616e73666572206661696c6564536166654d6174683a206d756c7469706c69636174696f6e206f766572666c6f777365743a20696e76616c6964206465706f7369742066656520626173697320706f696e7473a2646970667358221220efa0b365bb75f30ace9bcf57db633bb5accc14770a8f02e7347e914981118fa664736f6c634300060c0033000000000000000000000000f5291e193aad73cac6fd8371c98804a46c6c657700000000000000000000000033b28c7abc38a7252a8bc1912ca5c677ebf4a0cb00000000000000000000000033b28c7abc38a7252a8bc1912ca5c677ebf4a0cb00000000000000000000000000000000000000000000000000038d7ea4c680000000000000000000000000000000000000000000000000000000000061bde960

000000000000000000000000f5291e193aad73cac6fd8371c98804a46c6c657700000000000000000000000033b28c7abc38a7252a8bc1912ca5c677ebf4a0cb00000000000000000000000033b28c7abc38a7252a8bc1912ca5c677ebf4a0cb00000000000000000000000000000000000000000000000000038d7ea4c680000000000000000000000000000000000000000000000000000000000061bde960

-----Decoded View---------------
Arg [0] : _salem (address): 0xf5291e193aad73cac6fd8371c98804a46c6c6577
Arg [1] : _devaddr (address): 0x33b28c7abc38a7252a8bc1912ca5c677ebf4a0cb
Arg [2] : _feeAddress (address): 0x33b28c7abc38a7252a8bc1912ca5c677ebf4a0cb
Arg [3] : _SalemPerTime (uint256): 1000000000000000
Arg [4] : _startTime (uint256): 1639836000

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000f5291e193aad73cac6fd8371c98804a46c6c6577
Arg [1] : 00000000000000000000000033b28c7abc38a7252a8bc1912ca5c677ebf4a0cb
Arg [2] : 00000000000000000000000033b28c7abc38a7252a8bc1912ca5c677ebf4a0cb
Arg [3] : 00000000000000000000000000000000000000000000000000038d7ea4c68000
Arg [4] : 0000000000000000000000000000000000000000000000000000000061bde960

37702:12838:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49979:558;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;41023:95;;;:::i;:::-;;;;;;;;;;;;;;;;;;;49648:282;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;39431:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;39672:34;;;:::i;:::-;;;;;;;;;;;;;;;;;;;39370:25;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;39829:62;;;:::i;:::-;;;;;;;;;;;;;;;;;;;46949:817;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;44390:1062;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;47837:562;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;44134:180;;;:::i;:::-;;12605:148;;;:::i;:::-;;39767:24;;;:::i;:::-;;;;;;;;;;;;;;;;;;;41393:985;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;49240:279;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;11954:87;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;43122:121;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;39513:64;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;39306:29;;;:::i;:::-;;;;;;;;;;;;;;;;;;;41126:44;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;48984:248;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;39236:22;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;42491:555;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;39175:33;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;45526:1372;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;43308:743;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;12908:244;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;49979:558;12185:12;:10;:12::i;:::-;12174:23;;:7;:5;:7::i;:::-;:23;;;12166:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;50083:9:::1;;50065:15;:27;50057:92;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;50186:13;50168:15;:31;50160:77;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;50248:14;50265:8;:15;;;;50248:32;;50296:11;50291:159;50319:6;50313:3;:12;50291:159;;;50349:21;50373:8;50382:3;50373:13;;;;;;;;;;;;;;;;;;50349:37;;50425:13;50401:4;:21;;:37;;;;50291:159;50327:5;;;;;50291:159;;;;50472:13;50460:9;:25;;;;50503:26;50519:9;;50503:26;;;;;;;;;;;;;;;;;;12245:1;49979:558:::0;:::o;41023:95::-;41068:7;41095:8;:15;;;;41088:22;;41023:95;:::o;49648:282::-;12185:12;:10;:12::i;:::-;12174:23;;:7;:5;:7::i;:::-;:23;;;12166:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;39873:18:::1;49739:15;:36;;49731:57;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;49799:17;:15;:17::i;:::-;49844:15;49827:14;:32;;;;49894:10;49875:47;;;49906:15;49875:47;;;;;;;;;;;;;;;;;;49648:282:::0;:::o;39431:26::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;39672:34::-;;;;:::o;39370:25::-;;;;;;;;;;;;;:::o;39829:62::-;39873:18;39829:62;:::o;46949:817::-;1714:1;2320:7;;:19;;2312:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1714:1;2453:7;:18;;;;47031:21:::1;47055:8;47064:4;47055:14;;;;;;;;;;;;;;;;;;47031:38;;47080:21;47104:8;:14;47113:4;47104:14;;;;;;;;;;;:26;47119:10;47104:26;;;;;;;;;;;;;;;47080:50;;47164:7;47149:4;:11;;;:22;;47141:53;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;47205:16;47216:4;47205:10;:16::i;:::-;47232:15;47250:69;47303:4;:15;;;47250:48;47293:4;47250:38;47266:4;:21;;;47250:4;:11;;;:15;;:38;;;;:::i;:::-;:42;;:48;;;;:::i;:::-;:52;;:69;;;;:::i;:::-;47232:87;;47344:1;47334:7;:11;47330:82;;;47362:38;47380:10;47392:7;47362:17;:38::i;:::-;47330:82;47436:1;47426:7;:11;47422:209;;;47468:24;47484:7;47468:4;:11;;;:15;;:24;;;;:::i;:::-;47454:4;:11;;:38;;;;47507:55;47541:10;47554:7;47507:4;:12;;;;;;;;;;;;:25;;;;:55;;;;;:::i;:::-;47593:26;47611:7;47593:4;:13;;;:17;;:26;;;;:::i;:::-;47577:4;:13;;:42;;;;47422:209;47659:48;47702:4;47659:38;47675:4;:21;;;47659:4;:11;;;:15;;:38;;;;:::i;:::-;:42;;:48;;;;:::i;:::-;47641:4;:15;;:66;;;;47744:4;47732:10;47723:35;;;47750:7;47723:35;;;;;;;;;;;;;;;;;;2484:1;;;1670::::0;2632:7;:22;;;;46949:817;;:::o;44390:1062::-;44442:21;44466:8;44475:4;44466:14;;;;;;;;;;;;;;;;;;44442:38;;44514:4;:21;;;44495:15;:40;44491:79;;44552:7;;;44491:79;44601:1;44584:4;:13;;;:18;:42;;;;44625:1;44606:4;:15;;;:20;44584:42;44580:135;;;44667:15;44643:4;:21;;:39;;;;44697:7;;;44580:135;44725:18;44746:53;44760:4;:21;;;44783:15;44746:13;:53::i;:::-;44725:74;;44810:19;44832:72;44888:15;;44832:51;44867:4;:15;;;44832:30;44847:14;;44832:10;:14;;:30;;;;:::i;:::-;:34;;:51;;;;:::i;:::-;:55;;:72;;;;:::i;:::-;44810:94;;44929:5;:10;;;44940:7;;;;;;;;;;;44949:19;44965:2;44949:11;:15;;:19;;;;:::i;:::-;44929:40;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;44925:170;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45040:1;45026:15;;45061:22;45076:6;45061:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;44983:112;44925:170;;;;45119:5;:10;;;45138:4;45145:11;45119:38;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45115:168;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45228:1;45214:15;;45249:22;45264:6;45249:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45171:112;45115:168;;;;45327:67;45353:40;45379:4;:13;;;45353:21;45369:4;45353:11;:15;;:21;;;;:::i;:::-;:25;;:40;;;;:::i;:::-;45327:4;:21;;;:25;;:67;;;;:::i;:::-;45303:4;:21;;:91;;;;45429:15;45405:4;:21;;:39;;;;44390:1062;;;;;:::o;47837:562::-;1714:1;2320:7;;:19;;2312:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1714:1;2453:7;:18;;;;47911:21:::1;47935:8;47944:4;47935:14;;;;;;;;;;;;;;;;;;47911:38;;47960:21;47984:8;:14;47993:4;47984:14;;;;;;;;;;;:26;47999:10;47984:26;;;;;;;;;;;;;;;47960:50;;48021:14;48038:4;:11;;;48021:28;;48074:1;48060:4;:11;;:15;;;;48104:1;48086:4;:15;;:19;;;;48116:54;48150:10;48163:6;48116:4;:12;;;;;;;;;;;;:25;;;;:54;;;;;:::i;:::-;48205:6;48187:4;:13;;;:24;48183:148;;48244:25;48262:6;48244:4;:13;;;:17;;:25;;;;:::i;:::-;48228:4;:13;;:41;;;;48183:148;;;48318:1;48302:4;:13;;:17;;;;48183:148;48378:4;48366:10;48348:43;;;48384:6;48348:43;;;;;;;;;;;;;;;;;;2484:1;;;1670::::0;2632:7;:22;;;;47837:562;:::o;44134:180::-;44179:14;44196:8;:15;;;;44179:32;;44227:11;44222:85;44250:6;44244:3;:12;44222:85;;;44280:15;44291:3;44280:10;:15::i;:::-;44258:5;;;;;44222:85;;;;44134:180;:::o;12605:148::-;12185:12;:10;:12::i;:::-;12174:23;;:7;:5;:7::i;:::-;:23;;;12166:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;12712:1:::1;12675:40;;12696:6;::::0;::::1;;;;;;;;12675:40;;;;;;;;;;;;12743:1;12726:6:::0;::::1;:19;;;;;;;;;;;;;;;;;;12605:148::o:0;39767:24::-;;;;:::o;41393:985::-;12185:12;:10;:12::i;:::-;12174:23;;:7;:5;:7::i;:::-;:23;;;12166:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;41517:8:::1;41263:5;41236:32;;:13;:23;41250:8;41236:23;;;;;;;;;;;;;;;;;;;;;;;;;:32;;;41228:70;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;41568:8:::2;:18;;;41595:4;41568:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;41639:3;41622:13;:20;;;;41614:70;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;41699:11;41695:61;;;41727:17;:15;:17::i;:::-;41695:61;41766:24;41811:9;;41793:15;:27;:57;;41841:9;;41793:57;;;41823:15;41793:57;41766:84;;41879:32;41899:11;41879:15;;:19;;:32;;;;:::i;:::-;41861:15;:50;;;;41948:4;41922:13;:23;41936:8;41922:23;;;;;;;;;;;;;;;;:30;;;;;;;;;;;;;;;;;;41963:8;41991:275;;;;;;;;42029:8;41991:275;;;;;;42069:11;41991:275;;;;42118:16;41991:275;;;;42172:1;41991:275;;;;42207:13;41991:275;;;;;;42249:1;41991:275;;::::0;41963:314:::2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;42321:1;42303:8;:15;;;;:19;42295:75;42332:8;42343:11;42356:13;42295:75;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;41309:1;12245::::1;41393:985:::0;;;;:::o;49240:279::-;49326:10;;;;;;;;;;;49312:24;;:10;:24;;;49304:61;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49407:1;49384:25;;:11;:25;;;;49376:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49446:11;49433:10;;:24;;;;;;;;;;;;;;;;;;49499:11;49473:38;;49487:10;49473:38;;;;;;;;;;;;49240:279;:::o;11954:87::-;12000:7;12027:6;;;;;;;;;;;12020:13;;11954:87;:::o;43122:121::-;43194:7;43221:14;43229:5;43221:3;:7;;:14;;;;:::i;:::-;43214:21;;43122:121;;;;:::o;39513:64::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;39306:29::-;;;;:::o;41126:44::-;;;;;;;;;;;;;;;;;;;;;;:::o;48984:248::-;49067:7;;;;;;;;;;;49053:21;;:10;:21;;;49045:43;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49127:1;49107:22;;:8;:22;;;;49099:43;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49165:8;49155:7;;:18;;;;;;;;;;;;;;;;;;49215:8;49189:35;;49203:10;49189:35;;;;;;;;;;;;48984:248;:::o;39236:22::-;;;;;;;;;;;;;:::o;42491:555::-;12185:12;:10;:12::i;:::-;12174:23;;:7;:5;:7::i;:::-;:23;;;12166:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;42634:3:::1;42617:13;:20;;;;42609:70;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;42694:11;42690:61;;;42722:17;:15;:17::i;:::-;42690:61;42779:63;42830:11;42779:46;42799:8;42808:4;42799:14;;;;;;;;;;;;;;;;;;:25;;;42779:15;;:19;;:46;;;;:::i;:::-;:50;;:63;;;;:::i;:::-;42761:15;:81;;;;42881:11;42853:8;42862:4;42853:14;;;;;;;;;;;;;;;;;;:25;;:39;;;;42933:13;42903:8;42912:4;42903:14;;;;;;;;;;;;;;;;;;:27;;;:43;;;;;;;;;;;;;;;;;;42972:4;42964:74;42986:8;42995:4;42986:14;;;;;;;;;;;;;;;;;;:22;;;;;;;;;;;;43011:11;43024:13;42964:74;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;42491:555:::0;;;;:::o;39175:33::-;;;:::o;45526:1372::-;1714:1;2320:7;;:19;;2312:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1714:1;2453:7;:18;;;;45607:21:::1;45631:8;45640:4;45631:14;;;;;;;;;;;;;;;;;;45607:38;;45656:21;45680:8;:14;45689:4;45680:14;;;;;;;;;;;:26;45695:10;45680:26;;;;;;;;;;;;;;;45656:50;;45717:16;45728:4;45717:10;:16::i;:::-;45762:1;45748:4;:11;;;:15;45744:239;;;45780:15;45798:69;45851:4;:15;;;45798:48;45841:4;45798:38;45814:4;:21;;;45798:4;:11;;;:15;;:38;;;;:::i;:::-;:42;;:48;;;;:::i;:::-;:52;;:69;;;;:::i;:::-;45780:87;;45896:1;45886:7;:11;45882:90;;;45918:38;45936:10;45948:7;45918:17;:38::i;:::-;45882:90;45744:239;;46007:1;45997:7;:11;45993:771;;;46025:21;46049:4;:12;;;;;;;;;;;;:22;;;46080:4;46049:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;46025:61;;46101:74;46139:10;46160:4;46167:7;46101:4;:12;;;;;;;;;;;;:29;;;;:74;;;;;;:::i;:::-;46200:56;46242:13;46200:4;:12;;;;;;;;;;;;:22;;;46231:4;46200:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;:41;;:56;;;;:::i;:::-;46190:66;;46295:1;46275:4;:17;;;;;;;;;;;;:21;;;46271:482;;;46317:18;46338:41;46373:5;46338:30;46350:4;:17;;;;;;;;;;;;46338:30;;:7;:11;;:30;;;;:::i;:::-;:34;;:41;;;;:::i;:::-;46317:62;;46398:49;46424:10;;;;;;;;;;;46436;46398:4;:12;;;;;;;;;;;;:25;;;;:49;;;;;:::i;:::-;46480:40;46509:10;46480:24;46496:7;46480:4;:11;;;:15;;:24;;;;:::i;:::-;:28;;:40;;;;:::i;:::-;46466:4;:11;;:54;;;;46555:42;46586:10;46555:26;46573:7;46555:4;:13;;;:17;;:26;;;;:::i;:::-;:30;;:42;;;;:::i;:::-;46539:4;:13;;:58;;;;46271:482;;;;46652:24;46668:7;46652:4;:11;;;:15;;:24;;;;:::i;:::-;46638:4;:11;;:38;;;;46711:26;46729:7;46711:4;:13;;;:17;;:26;;;;:::i;:::-;46695:4;:13;;:42;;;;46271:482;45993:771;;46792:48;46835:4;46792:38;46808:4;:21;;;46792:4;:11;;;:15;;:38;;;;:::i;:::-;:42;;:48;;;;:::i;:::-;46774:4;:15;;:66;;;;46876:4;46864:10;46856:34;;;46882:7;46856:34;;;;;;;;;;;;;;;;;;2484:1;;1670::::0;2632:7;:22;;;;45526:1372;;:::o;43308:743::-;43382:7;43402:21;43426:8;43435:4;43426:14;;;;;;;;;;;;;;;;;;43402:38;;43451:21;43475:8;:14;43484:4;43475:14;;;;;;;;;;;:21;43490:5;43475:21;;;;;;;;;;;;;;;43451:45;;43507:24;43534:4;:21;;;43507:48;;43588:4;:21;;;43570:15;:39;:61;;;;;43630:1;43613:4;:13;;;:18;;43570:61;:84;;;;;43653:1;43635:15;;:19;43570:84;43566:396;;;43671:18;43692:53;43706:4;:21;;;43729:15;43692:13;:53::i;:::-;43671:74;;43760:19;43782:72;43838:15;;43782:51;43817:4;:15;;;43782:30;43797:14;;43782:10;:14;;:30;;;;:::i;:::-;:34;;:51;;;;:::i;:::-;:55;;:72;;;;:::i;:::-;43760:94;;43888:62;43909:40;43935:4;:13;;;43909:21;43925:4;43909:11;:15;;:21;;;;:::i;:::-;:25;;:40;;;;:::i;:::-;43888:16;:20;;:62;;;;:::i;:::-;43869:81;;43566:396;;;43979:64;44027:4;:15;;;43979:43;44017:4;43979:33;43995:16;43979:4;:11;;;:15;;:33;;;;:::i;:::-;:37;;:43;;;;:::i;:::-;:47;;:64;;;;:::i;:::-;43972:71;;;;;43308:743;;;;:::o;12908:244::-;12185:12;:10;:12::i;:::-;12174:23;;:7;:5;:7::i;:::-;:23;;;12166:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13017:1:::1;12997:22;;:8;:22;;;;12989:73;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13107:8;13078:38;;13099:6;::::0;::::1;;;;;;;;13078:38;;;;;;;;;;;;13136:8;13127:6;::::0;:17:::1;;;;;;;;;;;;;;;;;;12908:244:::0;:::o;3212:106::-;3265:15;3300:10;3293:17;;3212:106;:::o;7149:220::-;7207:7;7236:1;7231;:6;7227:20;;;7246:1;7239:8;;;;7227:20;7258:9;7274:1;7270;:5;7258:17;;7303:1;7298;7294;:5;;;;;;:10;7286:56;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7360:1;7353:8;;;7149:220;;;;;:::o;7847:153::-;7905:7;7937:1;7933;:5;7925:44;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7991:1;7987;:5;;;;;;7980:12;;7847:153;;;;:::o;6732:158::-;6790:7;6823:1;6818;:6;;6810:49;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;6881:1;6877;:5;6870:12;;6732:158;;;;:::o;48515:433::-;48592:16;48611:5;:15;;;48635:4;48611:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48592:49;;48652:20;48705:8;48695:7;:18;48691:177;;;48748:5;:14;;;48763:3;48768:8;48748:29;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48730:47;;48691:177;;;48828:5;:14;;;48843:3;48848:7;48828:28;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48810:46;;48691:177;48886:15;48878:62;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48515:433;;;;:::o;34016:211::-;34133:86;34153:5;34183:23;;;34208:2;34212:5;34160:58;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34133:19;:86::i;:::-;34016:211;;;:::o;6270:179::-;6328:7;6348:9;6364:1;6360;:5;6348:17;;6389:1;6384;:6;;6376:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;6440:1;6433:8;;;6270:179;;;;:::o;34235:248::-;34379:96;34399:5;34429:27;;;34458:4;34464:2;34468:5;34406:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34379:19;:96::i;:::-;34235:248;;;;:::o;36551:774::-;36975:23;37001:69;37029:4;37001:69;;;;;;;;;;;;;;;;;37009:5;37001:27;;;;:69;;;;;:::i;:::-;36975:95;;37105:1;37085:10;:17;:21;37081:237;;;37240:10;37229:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37221:85;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37081:237;36551:774;;;:::o;16758:195::-;16861:12;16893:52;16915:6;16923:4;16929:1;16932:12;16893:21;:52::i;:::-;16886:59;;16758:195;;;;;:::o;17810:530::-;17937:12;17995:5;17970:21;:30;;17962:81;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18062:18;18073:6;18062:10;:18::i;:::-;18054:60;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18188:12;18202:23;18229:6;:11;;18249:5;18257:4;18229:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18187:75;;;;18280:52;18298:7;18307:10;18319:12;18280:17;:52::i;:::-;18273:59;;;;17810:530;;;;;;:::o;13840:422::-;13900:4;14108:12;14219:7;14207:20;14199:28;;14253:1;14246:4;:8;14239:15;;;13840:422;;;:::o;20350:742::-;20465:12;20494:7;20490:595;;;20525:10;20518:17;;;;20490:595;20659:1;20639:10;:17;:21;20635:439;;;20902:10;20896:17;20963:15;20950:10;20946:2;20942:19;20935:44;20850:148;21045:12;21038:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20350:742;;;;;;:::o

ipfs://efa0b365bb75f30ace9bcf57db633bb5accc14770a8f02e7347e914981118fa6