Contract 0x311434160d7537be358930def317afb606c0d737 5

/**
 *Submitted for verification at Etherscan.io on 2021-09-22
 */

// SPDX-License-Identifier: MIT

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/utils/Context.sol

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(
            currentAllowance >= amount,
            "ERC20: transfer amount exceeds allowance"
        );
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender] + addedValue
        );
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        virtual
        returns (bool)
    {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(
            currentAllowance >= subtractedValue,
            "ERC20: decreased allowance below zero"
        );
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(
            senderBalance >= amount,
            "ERC20: transfer amount exceeds balance"
        );
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol

pragma solidity ^0.8.0;

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 currentAllowance = allowance(account, _msgSender());
        require(
            currentAllowance >= amount,
            "ERC20: burn amount exceeds allowance"
        );
        unchecked {
            _approve(account, _msgSender(), currentAllowance - amount);
        }
        _burn(account, amount);
    }
}

// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Capped.sol

pragma solidity ^0.8.0;

/**
 * @dev Extension of {ERC20} that adds a cap to the supply of tokens.
 */
abstract contract ERC20Capped is ERC20 {
    uint256 private immutable _cap;

    /**
     * @dev Sets the value of the `cap`. This value is immutable, it can only be
     * set once during construction.
     */
    constructor(uint256 cap_) {
        require(cap_ > 0, "ERC20Capped: cap is 0");
        _cap = cap_;
    }

    /**
     * @dev Returns the cap on the token's total supply.
     */
    function cap() public view virtual returns (uint256) {
        return _cap;
    }

    /**
     * @dev See {ERC20-_mint}.
     */
    function _mint(address account, uint256 amount) internal virtual override {
        require(
            ERC20.totalSupply() + amount <= cap(),
            "ERC20Capped: cap exceeded"
        );
        super._mint(account, amount);
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/utils/introspection/IERC165.sol

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/utils/introspection/ERC165.sol

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override
        returns (bool)
    {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// File: erc-payable-token/contracts/token/ERC1363/IERC1363.sol

pragma solidity ^0.8.0;

/**
 * @title IERC1363 Interface
 * @dev Interface for a Payable Token contract as defined in
 *  https://eips.ethereum.org/EIPS/eip-1363
 */
interface IERC1363 is IERC20, IERC165 {
    /**
     * @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
     * @param recipient address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @return true unless throwing
     */
    function transferAndCall(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
     * @param recipient address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @param data bytes Additional data with no specified format, sent in call to `recipient`
     * @return true unless throwing
     */
    function transferAndCall(
        address recipient,
        uint256 amount,
        bytes calldata data
    ) external returns (bool);

    /**
     * @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
     * @param sender address The address which you want to send tokens from
     * @param recipient address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @return true unless throwing
     */
    function transferFromAndCall(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
     * @param sender address The address which you want to send tokens from
     * @param recipient address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @param data bytes Additional data with no specified format, sent in call to `recipient`
     * @return true unless throwing
     */
    function transferFromAndCall(
        address sender,
        address recipient,
        uint256 amount,
        bytes calldata data
    ) external returns (bool);

    /**
     * @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
     * and then call `onApprovalReceived` on spender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender address The address which will spend the funds
     * @param amount uint256 The amount of tokens to be spent
     */
    function approveAndCall(address spender, uint256 amount)
        external
        returns (bool);

    /**
     * @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
     * and then call `onApprovalReceived` on spender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender address The address which will spend the funds
     * @param amount uint256 The amount of tokens to be spent
     * @param data bytes Additional data with no specified format, sent in call to `spender`
     */
    function approveAndCall(
        address spender,
        uint256 amount,
        bytes calldata data
    ) external returns (bool);
}

// File: erc-payable-token/contracts/token/ERC1363/IERC1363Receiver.sol

pragma solidity ^0.8.0;

/**
 * @title IERC1363Receiver Interface
 * @dev Interface for any contract that wants to support transferAndCall or transferFromAndCall
 *  from ERC1363 token contracts as defined in
 *  https://eips.ethereum.org/EIPS/eip-1363
 */
interface IERC1363Receiver {
    /**
     * @notice Handle the receipt of ERC1363 tokens
     * @dev Any ERC1363 smart contract calls this function on the recipient
     * after a `transfer` or a `transferFrom`. This function MAY throw to revert and reject the
     * transfer. Return of other than the magic value MUST result in the
     * transaction being reverted.
     * Note: the token contract address is always the message sender.
     * @param operator address The address which called `transferAndCall` or `transferFromAndCall` function
     * @param sender address The address which are token transferred from
     * @param amount uint256 The amount of tokens transferred
     * @param data bytes Additional data with no specified format
     * @return `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))` unless throwing
     */
    function onTransferReceived(
        address operator,
        address sender,
        uint256 amount,
        bytes calldata data
    ) external returns (bytes4);
}

// File: erc-payable-token/contracts/token/ERC1363/IERC1363Spender.sol

pragma solidity ^0.8.0;

/**
 * @title IERC1363Spender Interface
 * @dev Interface for any contract that wants to support approveAndCall
 *  from ERC1363 token contracts as defined in
 *  https://eips.ethereum.org/EIPS/eip-1363
 */
interface IERC1363Spender {
    /**
     * @notice Handle the approval of ERC1363 tokens
     * @dev Any ERC1363 smart contract calls this function on the recipient
     * after an `approve`. This function MAY throw to revert and reject the
     * approval. Return of other than the magic value MUST result in the
     * transaction being reverted.
     * Note: the token contract address is always the message sender.
     * @param sender address The address which called `approveAndCall` function
     * @param amount uint256 The amount of tokens to be spent
     * @param data bytes Additional data with no specified format
     * @return `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))` unless throwing
     */
    function onApprovalReceived(
        address sender,
        uint256 amount,
        bytes calldata data
    ) external returns (bytes4);
}

// File: erc-payable-token/contracts/token/ERC1363/ERC1363.sol

pragma solidity ^0.8.0;

/**
 * @title ERC1363
 * @dev Implementation of an ERC1363 interface
 */
abstract contract ERC1363 is ERC20, IERC1363, ERC165 {
    using Address for address;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(ERC165, IERC165)
        returns (bool)
    {
        return
            interfaceId == type(IERC1363).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev Transfer tokens to a specified address and then execute a callback on recipient.
     * @param recipient The address to transfer to.
     * @param amount The amount to be transferred.
     * @return A boolean that indicates if the operation was successful.
     */
    function transferAndCall(address recipient, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        return transferAndCall(recipient, amount, "");
    }

    /**
     * @dev Transfer tokens to a specified address and then execute a callback on recipient.
     * @param recipient The address to transfer to
     * @param amount The amount to be transferred
     * @param data Additional data with no specified format
     * @return A boolean that indicates if the operation was successful.
     */
    function transferAndCall(
        address recipient,
        uint256 amount,
        bytes memory data
    ) public virtual override returns (bool) {
        transfer(recipient, amount);
        require(
            _checkAndCallTransfer(_msgSender(), recipient, amount, data),
            "ERC1363: _checkAndCallTransfer reverts"
        );
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another and then execute a callback on recipient.
     * @param sender The address which you want to send tokens from
     * @param recipient The address which you want to transfer to
     * @param amount The amount of tokens to be transferred
     * @return A boolean that indicates if the operation was successful.
     */
    function transferFromAndCall(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        return transferFromAndCall(sender, recipient, amount, "");
    }

    /**
     * @dev Transfer tokens from one address to another and then execute a callback on recipient.
     * @param sender The address which you want to send tokens from
     * @param recipient The address which you want to transfer to
     * @param amount The amount of tokens to be transferred
     * @param data Additional data with no specified format
     * @return A boolean that indicates if the operation was successful.
     */
    function transferFromAndCall(
        address sender,
        address recipient,
        uint256 amount,
        bytes memory data
    ) public virtual override returns (bool) {
        transferFrom(sender, recipient, amount);
        require(
            _checkAndCallTransfer(sender, recipient, amount, data),
            "ERC1363: _checkAndCallTransfer reverts"
        );
        return true;
    }

    /**
     * @dev Approve spender to transfer tokens and then execute a callback on recipient.
     * @param spender The address allowed to transfer to
     * @param amount The amount allowed to be transferred
     * @return A boolean that indicates if the operation was successful.
     */
    function approveAndCall(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        return approveAndCall(spender, amount, "");
    }

    /**
     * @dev Approve spender to transfer tokens and then execute a callback on recipient.
     * @param spender The address allowed to transfer to.
     * @param amount The amount allowed to be transferred.
     * @param data Additional data with no specified format.
     * @return A boolean that indicates if the operation was successful.
     */
    function approveAndCall(
        address spender,
        uint256 amount,
        bytes memory data
    ) public virtual override returns (bool) {
        approve(spender, amount);
        require(
            _checkAndCallApprove(spender, amount, data),
            "ERC1363: _checkAndCallApprove reverts"
        );
        return true;
    }

    /**
     * @dev Internal function to invoke `onTransferReceived` on a target address
     *  The call is not executed if the target address is not a contract
     * @param sender address Representing the previous owner of the given token value
     * @param recipient address Target address that will receive the tokens
     * @param amount uint256 The amount mount of tokens to be transferred
     * @param data bytes Optional data to send along with the call
     * @return whether the call correctly returned the expected magic value
     */
    function _checkAndCallTransfer(
        address sender,
        address recipient,
        uint256 amount,
        bytes memory data
    ) internal virtual returns (bool) {
        if (!recipient.isContract()) {
            return false;
        }
        bytes4 retval = IERC1363Receiver(recipient).onTransferReceived(
            _msgSender(),
            sender,
            amount,
            data
        );
        return (retval ==
            IERC1363Receiver(recipient).onTransferReceived.selector);
    }

    /**
     * @dev Internal function to invoke `onApprovalReceived` on a target address
     *  The call is not executed if the target address is not a contract
     * @param spender address The address which will spend the funds
     * @param amount uint256 The amount of tokens to be spent
     * @param data bytes Optional data to send along with the call
     * @return whether the call correctly returned the expected magic value
     */
    function _checkAndCallApprove(
        address spender,
        uint256 amount,
        bytes memory data
    ) internal virtual returns (bool) {
        if (!spender.isContract()) {
            return false;
        }
        bytes4 retval = IERC1363Spender(spender).onApprovalReceived(
            _msgSender(),
            amount,
            data
        );
        return (retval == IERC1363Spender(spender).onApprovalReceived.selector);
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: eth-token-recover/contracts/TokenRecover.sol

pragma solidity ^0.8.0;

/**
 * @title TokenRecover
 * @dev Allows owner to recover any ERC20 sent into the contract
 */
contract TokenRecover is Ownable {
    /**
     * @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
     * @param tokenAddress The token contract address
     * @param tokenAmount Number of tokens to be sent
     */
    function recoverERC20(address tokenAddress, uint256 tokenAmount)
        public
        virtual
        onlyOwner
    {
        IERC20(tokenAddress).transfer(owner(), tokenAmount);
    }
}

// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol

pragma solidity ^0.8.0;

/**
 * @title ERC20Decimals
 * @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
 */
abstract contract ERC20Decimals is ERC20 {
    uint8 private immutable _decimals;

    /**
     * @dev Sets the value of the `decimals`. This value is immutable, it can only be
     * set once during construction.
     */
    constructor(uint8 decimals_) {
        _decimals = decimals_;
    }

    function decimals() public view virtual override returns (uint8) {
        return _decimals;
    }
}

// File: contracts/token/ERC20/behaviours/ERC20Mintable.sol

pragma solidity ^0.8.0;

/**
 * @title ERC20Mintable
 * @dev Implementation of the ERC20Mintable. Extension of {ERC20} that adds a minting behaviour.
 */
abstract contract ERC20Mintable is ERC20 {
    // indicates if minting is finished
    bool private _mintingFinished = false;

    /**
     * @dev Emitted during finish minting
     */
    event MintFinished();

    /**
     * @dev Tokens can be minted only before minting finished.
     */
    modifier canMint() {
        require(!_mintingFinished, "ERC20Mintable: minting is finished");
        _;
    }

    /**
     * @return if minting is finished or not.
     */
    function mintingFinished() external view returns (bool) {
        return _mintingFinished;
    }

    /**
     * @dev Function to mint tokens.
     *
     * WARNING: it allows everyone to mint new tokens. Access controls MUST be defined in derived contracts.
     *
     * @param account The address that will receive the minted tokens
     * @param amount The amount of tokens to mint
     */
    function mint(address account, uint256 amount) external canMint {
        _mint(account, amount);
    }

    /**
     * @dev Function to stop minting new tokens.
     *
     * WARNING: it allows everyone to finish minting. Access controls MUST be defined in derived contracts.
     */
    function finishMinting() external canMint {
        _finishMinting();
    }

    /**
     * @dev Function to stop minting new tokens.
     */
    function _finishMinting() internal virtual {
        _mintingFinished = true;

        emit MintFinished();
    }
}

// File: @openzeppelin/contracts/access/IAccessControl.sol

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(
        bytes32 indexed role,
        bytes32 indexed previousAdminRole,
        bytes32 indexed newAdminRole
    );

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(
        bytes32 indexed role,
        address indexed account,
        address indexed sender
    );

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(
        bytes32 indexed role,
        address indexed account,
        address indexed sender
    );

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account)
        external
        view
        returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// File: @openzeppelin/contracts/utils/Strings.sol

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length)
        internal
        pure
        returns (string memory)
    {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// File: @openzeppelin/contracts/access/AccessControl.sol

pragma solidity ^0.8.0;

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override
        returns (bool)
    {
        return
            interfaceId == type(IAccessControl).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account)
        public
        view
        override
        returns (bool)
    {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(uint160(account), 20),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account)
        public
        virtual
        override
        onlyRole(getRoleAdmin(role))
    {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account)
        public
        virtual
        override
        onlyRole(getRoleAdmin(role))
    {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account)
        public
        virtual
        override
    {
        require(
            account == _msgSender(),
            "AccessControl: can only renounce roles for self"
        );

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    function _grantRole(bytes32 role, address account) private {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// File: contracts/access/Roles.sol

pragma solidity ^0.8.0;

contract Roles is AccessControl {
    bytes32 public constant MINTER_ROLE = keccak256("MINTER");

    constructor() {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
        _setupRole(MINTER_ROLE, _msgSender());
    }

    modifier onlyMinter() {
        require(
            hasRole(MINTER_ROLE, _msgSender()),
            "Roles: caller does not have the MINTER role"
        );
        _;
    }
}

// File: contracts/token/ERC20/PowerfulERC20.sol

pragma solidity ^0.8.0;

/**
 * @title PowerfulERC20
 * @dev Implementation of the PowerfulERC20
 */
contract PowerfulERC20 is
    ERC20Decimals,
    ERC20Capped,
    ERC20Mintable,
    ERC20Burnable,
    ERC1363,
    TokenRecover,
    Roles
{
    constructor(
        string memory name_,
        string memory symbol_,
        uint8 decimals_,
        uint256 cap_,
        uint256 initialBalance_
    ) payable ERC20(name_, symbol_) ERC20Decimals(decimals_) ERC20Capped(cap_) {
        // Immutable variables cannot be read during contract creation time
        // https://github.com/ethereum/solidity/issues/10463
        require(initialBalance_ <= cap_, "ERC20Capped: cap exceeded");
        ERC20._mint(_msgSender(), initialBalance_);
    }

    function decimals()
        public
        view
        virtual
        override(ERC20, ERC20Decimals)
        returns (uint8)
    {
        return super.decimals();
    }

    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(AccessControl, ERC1363)
        returns (bool)
    {
        return super.supportsInterface(interfaceId);
    }

    /**
     * @dev Function to mint tokens.
     *
     * NOTE: restricting access to addresses with MINTER role. See {ERC20Mintable-mint}.
     *
     * @param account The address that will receive the minted tokens
     * @param amount The amount of tokens to mint
     */
    function _mint(address account, uint256 amount)
        internal
        override(ERC20, ERC20Capped)
        onlyMinter
    {
        super._mint(account, amount);
    }

    /**
     * @dev Function to stop minting new tokens.
     *
     * NOTE: restricting access to owner only. See {ERC20Mintable-finishMinting}.
     */
    function _finishMinting() internal override onlyOwner {
        super._finishMinting();
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"},{"internalType":"uint8","name":"decimals_","type":"uint8"},{"internalType":"uint256","name":"cap_","type":"uint256"},{"internalType":"uint256","name":"initialBalance_","type":"uint256"}],"stateMutability":"payable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"MintFinished","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approveAndCall","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"approveAndCall","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"cap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"finishMinting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"mintingFinished","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint256","name":"tokenAmount","type":"uint256"}],"name":"recoverERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferAndCall","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"transferAndCall","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"transferFromAndCall","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFromAndCall","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

00000000000000000000000000000000000000000000000000000000000000a000000000000000000000000000000000000000000000000000000000000000e0000000000000000000000000000000000000000000000000000000000000001200000000000000000000000000000000000000000094e47b8d6817153400000000000000000000000000000000000000000000000094e47b8d68171534000000000000000000000000000000000000000000000000000000000000000000000e4e616b616d6f746f2e47616d657300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000044e414b4100000000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : name_ (string): Nakamoto.Games
Arg [1] : symbol_ (string): NAKA
Arg [2] : decimals_ (uint8): 18
Arg [3] : cap_ (uint256): 180000000000000000000000000
Arg [4] : initialBalance_ (uint256): 180000000000000000000000000

-----Encoded View---------------
9 Constructor Arguments found :
Arg [0] : 00000000000000000000000000000000000000000000000000000000000000a0
Arg [1] : 00000000000000000000000000000000000000000000000000000000000000e0
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000012
Arg [3] : 00000000000000000000000000000000000000000094e47b8d68171534000000
Arg [4] : 00000000000000000000000000000000000000000094e47b8d68171534000000
Arg [5] : 000000000000000000000000000000000000000000000000000000000000000e
Arg [6] : 4e616b616d6f746f2e47616d6573000000000000000000000000000000000000
Arg [7] : 0000000000000000000000000000000000000000000000000000000000000004
Arg [8] : 4e414b4100000000000000000000000000000000000000000000000000000000