Contract 0x2f7f1a1C392e58012B84cfA673df73101666314D 7

/**
 *Submitted for verification at polygonscan.com on 2022-10-14
*/

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

interface ILiFi {
    /// Structs ///

    struct BridgeData {
        bytes32 transactionId;
        string bridge;
        string integrator;
        address referrer;
        address sendingAssetId;
        address receiver;
        uint256 minAmount;
        uint256 destinationChainId;
        bool hasSourceSwaps;
        bool hasDestinationCall;
    }

    /// Events ///

    event LiFiTransferStarted(ILiFi.BridgeData bridgeData);

    event LiFiTransferCompleted(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );
}

// https://github.com/bcnmy/hyphen-contract/blob/master/contracts/hyphen/LiquidityPool.sol
interface IHyphenRouter {
    function depositErc20(
        uint256 toChainId,
        address tokenAddress,
        address receiver,
        uint256 amount,
        string calldata tag
    ) external;

    function depositNative(
        address receiver,
        uint256 toChainId,
        string calldata tag
    ) external payable;
}

error TokenAddressIsZero();
error TokenNotSupported();
error CannotBridgeToSameNetwork();
error ZeroPostSwapBalance();
error NoSwapDataProvided();
error NativeValueWithERC();
error ContractCallNotAllowed();
error NullAddrIsNotAValidSpender();
error NullAddrIsNotAnERC20Token();
error NoTransferToNullAddress();
error NativeAssetTransferFailed();
error InvalidBridgeConfigLength();
error InvalidAmount();
error InvalidContract();
error InvalidConfig();
error UnsupportedChainId(uint256 chainId);
error InvalidReceiver();
error InvalidDestinationChain();
error InvalidSendingToken();
error InvalidCaller();
error AlreadyInitialized();
error NotInitialized();
error OnlyContractOwner();
error CannotAuthoriseSelf();
error RecoveryAddressCannotBeZero();
error CannotDepositNativeToken();
error InvalidCallData();
error NativeAssetNotSupported();
error UnAuthorized();
error NoSwapFromZeroBalance();
error InvalidFallbackAddress();
error CumulativeSlippageTooHigh(uint256 minAmount, uint256 receivedAmount);
error InsufficientBalance(uint256 required, uint256 balance);
error ZeroAmount();
error InvalidFee();
error InformationMismatch();
error NotAContract();
error NotEnoughBalance(uint256 requested, uint256 available);

// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

library LibBytes {
    // solhint-disable no-inline-assembly

    // LibBytes specific errors
    error SliceOverflow();
    error SliceOutOfBounds();
    error AddressOutOfBounds();
    error UintOutOfBounds();

    // -------------------------

    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        if (_length + 31 < _length) revert SliceOverflow();
        if (_bytes.length < _start + _length) revert SliceOutOfBounds();

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        if (_bytes.length < _start + 20) {
            revert AddressOutOfBounds();
        }
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        if (_bytes.length < _start + 1) {
            revert UintOutOfBounds();
        }
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        if (_bytes.length < _start + 2) {
            revert UintOutOfBounds();
        }
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        if (_bytes.length < _start + 4) {
            revert UintOutOfBounds();
        }
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        if (_bytes.length < _start + 8) {
            revert UintOutOfBounds();
        }
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        if (_bytes.length < _start + 12) {
            revert UintOutOfBounds();
        }
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        if (_bytes.length < _start + 16) {
            revert UintOutOfBounds();
        }
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        if (_bytes.length < _start + 32) {
            revert UintOutOfBounds();
        }
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        if (_bytes.length < _start + 32) {
            revert UintOutOfBounds();
        }
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        // solhint-disable-next-line no-empty-blocks
                        for {

                        } eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

library LibUtil {
    using LibBytes for bytes;

    function getRevertMsg(bytes memory _res) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }

    /// @notice Determines whether the given address is the zero address
    /// @param addr The address to verify
    /// @return Boolean indicating if the address is the zero address
    function isZeroAddress(address addr) internal pure returns (bool) {
        return addr == address(0);
    }
}

library LibSwap {
    struct SwapData {
        address callTo;
        address approveTo;
        address sendingAssetId;
        address receivingAssetId;
        uint256 fromAmount;
        bytes callData;
        bool requiresDeposit;
    }

    event AssetSwapped(
        bytes32 transactionId,
        address dex,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount,
        uint256 timestamp
    );

    function swap(bytes32 transactionId, SwapData calldata _swap) internal {
        if (!LibAsset.isContract(_swap.callTo)) revert InvalidContract();
        uint256 fromAmount = _swap.fromAmount;
        if (fromAmount == 0) revert NoSwapFromZeroBalance();
        uint256 nativeValue = LibAsset.isNativeAsset(_swap.sendingAssetId) ? _swap.fromAmount : 0;
        uint256 initialSendingAssetBalance = LibAsset.getOwnBalance(_swap.sendingAssetId);
        uint256 initialReceivingAssetBalance = LibAsset.getOwnBalance(_swap.receivingAssetId);

        if (nativeValue == 0) {
            LibAsset.maxApproveERC20(IERC20(_swap.sendingAssetId), _swap.approveTo, _swap.fromAmount);
        }

        if (initialSendingAssetBalance < _swap.fromAmount) {
            revert InsufficientBalance(_swap.fromAmount, initialSendingAssetBalance);
        }

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = _swap.callTo.call{ value: nativeValue }(_swap.callData);
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }

        uint256 newBalance = LibAsset.getOwnBalance(_swap.receivingAssetId);

        emit AssetSwapped(
            transactionId,
            _swap.callTo,
            _swap.sendingAssetId,
            _swap.receivingAssetId,
            _swap.fromAmount,
            newBalance > initialReceivingAssetBalance ? newBalance - initialReceivingAssetBalance : newBalance,
            block.timestamp
        );
    }
}

/// @title LibAsset
/// @notice This library contains helpers for dealing with onchain transfers
///         of assets, including accounting for the native asset `assetId`
///         conventions and any noncompliant ERC20 transfers
library LibAsset {
    uint256 private constant MAX_UINT = type(uint256).max;

    address internal constant NULL_ADDRESS = address(0);

    /// @dev All native assets use the empty address for their asset id
    ///      by convention

    address internal constant NATIVE_ASSETID = NULL_ADDRESS; //address(0)

    /// @notice Gets the balance of the inheriting contract for the given asset
    /// @param assetId The asset identifier to get the balance of
    /// @return Balance held by contracts using this library
    function getOwnBalance(address assetId) internal view returns (uint256) {
        return assetId == NATIVE_ASSETID ? address(this).balance : IERC20(assetId).balanceOf(address(this));
    }

    /// @notice Transfers ether from the inheriting contract to a given
    ///         recipient
    /// @param recipient Address to send ether to
    /// @param amount Amount to send to given recipient
    function transferNativeAsset(address payable recipient, uint256 amount) private {
        if (recipient == NULL_ADDRESS) revert NoTransferToNullAddress();
        if (amount > address(this).balance) revert InsufficientBalance(amount, address(this).balance);
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = recipient.call{ value: amount }("");
        if (!success) revert NativeAssetTransferFailed();
    }

    /// @notice If the current allowance is insufficient, the allowance for a given spender
    /// is set to MAX_UINT.
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param amount Amount to approve for spending
    function maxApproveERC20(
        IERC20 assetId,
        address spender,
        uint256 amount
    ) internal {
        if (address(assetId) == NATIVE_ASSETID) return;
        if (spender == NULL_ADDRESS) revert NullAddrIsNotAValidSpender();
        uint256 allowance = assetId.allowance(address(this), spender);

        if (allowance < amount) SafeERC20.safeIncreaseAllowance(IERC20(assetId), spender, MAX_UINT - allowance);
    }

    /// @notice Transfers tokens from the inheriting contract to a given
    ///         recipient
    /// @param assetId Token address to transfer
    /// @param recipient Address to send token to
    /// @param amount Amount to send to given recipient
    function transferERC20(
        address assetId,
        address recipient,
        uint256 amount
    ) private {
        if (isNativeAsset(assetId)) revert NullAddrIsNotAnERC20Token();
        uint256 assetBalance = IERC20(assetId).balanceOf(address(this));
        if (amount > assetBalance) revert InsufficientBalance(amount, assetBalance);
        SafeERC20.safeTransfer(IERC20(assetId), recipient, amount);
    }

    /// @notice Transfers tokens from a sender to a given recipient
    /// @param assetId Token address to transfer
    /// @param from Address of sender/owner
    /// @param to Address of recipient/spender
    /// @param amount Amount to transfer from owner to spender
    function transferFromERC20(
        address assetId,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (assetId == NATIVE_ASSETID) revert NullAddrIsNotAnERC20Token();
        if (to == NULL_ADDRESS) revert NoTransferToNullAddress();

        IERC20 asset = IERC20(assetId);
        uint256 prevBalance = asset.balanceOf(to);
        SafeERC20.safeTransferFrom(asset, from, to, amount);
        if (asset.balanceOf(to) - prevBalance != amount) revert InvalidAmount();
    }

    function depositAsset(address assetId, uint256 amount) internal {
        if (isNativeAsset(assetId)) {
            if (msg.value < amount) revert InvalidAmount();
        } else {
            if (amount == 0) revert InvalidAmount();
            uint256 balance = IERC20(assetId).balanceOf(msg.sender);
            if (balance < amount) revert InsufficientBalance(amount, balance);
            transferFromERC20(assetId, msg.sender, address(this), amount);
        }
    }

    function depositAssets(LibSwap.SwapData[] calldata swaps) internal {
        for (uint256 i = 0; i < swaps.length; ) {
            LibSwap.SwapData memory swap = swaps[i];
            if (swap.requiresDeposit) {
                depositAsset(swap.sendingAssetId, swap.fromAmount);
            }
            unchecked {
                i++;
            }
        }
    }

    /// @notice Determines whether the given assetId is the native asset
    /// @param assetId The asset identifier to evaluate
    /// @return Boolean indicating if the asset is the native asset
    function isNativeAsset(address assetId) internal pure returns (bool) {
        return assetId == NATIVE_ASSETID;
    }

    /// @notice Wrapper function to transfer a given asset (native or erc20) to
    ///         some recipient. Should handle all non-compliant return value
    ///         tokens as well by using the SafeERC20 contract by open zeppelin.
    /// @param assetId Asset id for transfer (address(0) for native asset,
    ///                token address for erc20s)
    /// @param recipient Address to send asset to
    /// @param amount Amount to send to given recipient
    function transferAsset(
        address assetId,
        address payable recipient,
        uint256 amount
    ) internal {
        (assetId == NATIVE_ASSETID)
            ? transferNativeAsset(recipient, amount)
            : transferERC20(assetId, recipient, amount);
    }

    /// @dev Checks whether the given address is a contract and contains code
    function isContract(address _contractAddr) internal view returns (bool) {
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(_contractAddr)
        }
        return size > 0;
    }
}

/// @title Reentrancy Guard
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide protection against reentrancy
abstract contract ReentrancyGuard {
    /// Storage ///

    bytes32 private constant NAMESPACE = keccak256("com.lifi.reentrancyguard");

    /// Types ///

    struct ReentrancyStorage {
        uint256 status;
    }

    /// Errors ///

    error ReentrancyError();

    /// Constants ///

    uint256 private constant _NOT_ENTERED = 0;
    uint256 private constant _ENTERED = 1;

    /// Modifiers ///

    modifier nonReentrant() {
        ReentrancyStorage storage s = reentrancyStorage();
        if (s.status == _ENTERED) revert ReentrancyError();
        s.status = _ENTERED;
        _;
        s.status = _NOT_ENTERED;
    }

    /// Private Methods ///

    /// @dev fetch local storage
    function reentrancyStorage() private pure returns (ReentrancyStorage storage data) {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            data.slot := position
        }
    }
}

/// @title Lib Allow List
/// @author LI.FI (https://li.fi)
/// @notice Library for managing and accessing the conract address allow list
library LibAllowList {
    /// Storage ///
    bytes32 internal constant NAMESPACE = keccak256("com.lifi.library.allow.list");

    struct AllowListStorage {
        mapping(address => bool) allowlist;
        mapping(bytes4 => bool) selectorAllowList;
        address[] contracts;
    }

    /// @dev Adds a contract address to the allow list
    /// @param _contract the contract address to add
    function addAllowedContract(address _contract) internal {
        _checkAddress(_contract);

        AllowListStorage storage als = _getStorage();

        if (als.allowlist[_contract]) return;

        als.allowlist[_contract] = true;
        als.contracts.push(_contract);
    }

    /// @dev Checks whether a contract address has been added to the allow list
    /// @param _contract the contract address to check
    function contractIsAllowed(address _contract) internal view returns (bool) {
        return _getStorage().allowlist[_contract];
    }

    /// @dev Remove a contract address from the allow list
    /// @param _contract the contract address to remove
    function removeAllowedContract(address _contract) internal {
        AllowListStorage storage als = _getStorage();

        if (!als.allowlist[_contract]) {
            return;
        }

        als.allowlist[_contract] = false;

        uint256 length = als.contracts.length;
        // Find the contract in the list
        for (uint256 i = 0; i < length; i++) {
            if (als.contracts[i] == _contract) {
                // Move the last element into the place to delete
                als.contracts[i] = als.contracts[length - 1];
                // Remove the last element
                als.contracts.pop();
                break;
            }
        }
    }

    /// @dev Fetch contract addresses from the allow list
    function getAllowedContracts() internal view returns (address[] memory) {
        return _getStorage().contracts;
    }

    /// @dev Add a selector to the allow list
    /// @param _selector the selector to add
    function addAllowedSelector(bytes4 _selector) internal {
        _getStorage().selectorAllowList[_selector] = true;
    }

    /// @dev Removes a selector from the allow list
    /// @param _selector the selector to remove
    function removeAllowedSelector(bytes4 _selector) internal {
        _getStorage().selectorAllowList[_selector] = false;
    }

    /// @dev Returns if selector has been added to the allow list
    /// @param _selector the selector to check
    function selectorIsAllowed(bytes4 _selector) internal view returns (bool) {
        return _getStorage().selectorAllowList[_selector];
    }

    /// @dev Fetch local storage struct
    function _getStorage() internal pure returns (AllowListStorage storage als) {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            als.slot := position
        }
    }

    /// @dev Contains business logic for validating a contract address.
    /// @param _contract address of the dex to check
    function _checkAddress(address _contract) private view {
        if (_contract == address(0)) revert InvalidContract();

        if (_contract.code.length == 0) revert InvalidContract();
    }
}

/// @title Swapper
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide swap functionality
contract SwapperV2 is ILiFi {
    /// Types ///

    /// @dev only used to get around "Stack Too Deep" errors
    struct ReserveData {
        bytes32 transactionId;
        address payable leftoverReceiver;
        uint256 nativeReserve;
    }

    /// Modifiers ///

    /// @dev Sends any leftover balances back to the user
    /// @notice Sends any leftover balances to the user
    /// @param _swaps Swap data array
    /// @param _leftoverReceiver Address to send leftover tokens to
    /// @param _initialBalances Array of initial token balances
    modifier noLeftovers(
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256[] memory _initialBalances
    ) {
        uint256 numSwaps = _swaps.length;
        if (numSwaps != 1) {
            address finalAsset = _swaps[numSwaps - 1].receivingAssetId;
            uint256 curBalance;

            _;

            for (uint256 i = 0; i < numSwaps - 1; ) {
                address curAsset = _swaps[i].receivingAssetId;
                // Handle multi-to-one swaps
                if (curAsset != finalAsset) {
                    curBalance = LibAsset.getOwnBalance(curAsset) - _initialBalances[i];
                    if (curBalance > 0) {
                        LibAsset.transferAsset(curAsset, _leftoverReceiver, curBalance);
                    }
                }
                unchecked {
                    ++i;
                }
            }
        } else {
            _;
        }
    }

    /// @dev Sends any leftover balances back to the user reserving native tokens
    /// @notice Sends any leftover balances to the user
    /// @param _swaps Swap data array
    /// @param _leftoverReceiver Address to send leftover tokens to
    /// @param _initialBalances Array of initial token balances
    modifier noLeftoversReserve(
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256[] memory _initialBalances,
        uint256 _nativeReserve
    ) {
        uint256 numSwaps = _swaps.length;
        if (numSwaps != 1) {
            address finalAsset = _swaps[numSwaps - 1].receivingAssetId;
            uint256 curBalance;

            _;

            for (uint256 i = 0; i < numSwaps - 1; ) {
                address curAsset = _swaps[i].receivingAssetId;
                // Handle multi-to-one swaps
                if (curAsset != finalAsset) {
                    curBalance = LibAsset.getOwnBalance(curAsset) - _initialBalances[i];
                    uint256 reserve = LibAsset.isNativeAsset(curAsset) ? _nativeReserve : 0;
                    if (curBalance > 0) {
                        LibAsset.transferAsset(curAsset, _leftoverReceiver, curBalance - reserve);
                    }
                }
                unchecked {
                    ++i;
                }
            }
        } else {
            _;
        }
    }

    /// @dev Refunds any excess native asset sent to the contract after the main function
    /// @notice Refunds any excess native asset sent to the contract after the main function
    /// @param _refundReceiver Address to send refunds to
    modifier refundExcessNative(address payable _refundReceiver) {
        uint256 initialBalance = address(this).balance - msg.value;
        _;
        uint256 finalBalance = address(this).balance;
        uint256 excess = finalBalance > initialBalance ? finalBalance - initialBalance : 0;
        if (excess > 0) {
            LibAsset.transferAsset(LibAsset.NATIVE_ASSETID, _refundReceiver, excess);
        }
    }

    /// Internal Methods ///

    /// @dev Deposits value, executes swaps, and performs minimum amount check
    /// @param _transactionId the transaction id associated with the operation
    /// @param _minAmount the minimum amount of the final asset to receive
    /// @param _swaps Array of data used to execute swaps
    /// @param _leftoverReceiver The address to send leftover funds to
    /// @return uint256 result of the swap
    function _depositAndSwap(
        bytes32 _transactionId,
        uint256 _minAmount,
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver
    ) internal returns (uint256) {
        uint256 numSwaps = _swaps.length;

        if (numSwaps == 0) {
            revert NoSwapDataProvided();
        }

        address finalTokenId = _swaps[numSwaps - 1].receivingAssetId;
        uint256 initialBalance = LibAsset.getOwnBalance(finalTokenId);

        if (LibAsset.isNativeAsset(finalTokenId)) {
            initialBalance -= msg.value;
        }

        uint256[] memory initialBalances = _fetchBalances(_swaps);

        LibAsset.depositAssets(_swaps);
        _executeSwaps(_transactionId, _swaps, _leftoverReceiver, initialBalances);

        uint256 newBalance = LibAsset.getOwnBalance(finalTokenId) - initialBalance;

        if (newBalance < _minAmount) {
            revert CumulativeSlippageTooHigh(_minAmount, newBalance);
        }

        return newBalance;
    }

    /// @dev Deposits value, executes swaps, and performs minimum amount check and reserves native token for fees
    /// @param _transactionId the transaction id associated with the operation
    /// @param _minAmount the minimum amount of the final asset to receive
    /// @param _swaps Array of data used to execute swaps
    /// @param _leftoverReceiver The address to send leftover funds to
    /// @param _nativeReserve Amount of native token to prevent from being swept back to the caller
    function _depositAndSwap(
        bytes32 _transactionId,
        uint256 _minAmount,
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256 _nativeReserve
    ) internal returns (uint256) {
        uint256 numSwaps = _swaps.length;

        if (numSwaps == 0) {
            revert NoSwapDataProvided();
        }

        address finalTokenId = _swaps[numSwaps - 1].receivingAssetId;
        uint256 initialBalance = LibAsset.getOwnBalance(finalTokenId);

        if (LibAsset.isNativeAsset(finalTokenId)) {
            initialBalance -= msg.value;
        }

        uint256[] memory initialBalances = _fetchBalances(_swaps);

        LibAsset.depositAssets(_swaps);
        ReserveData memory rd = ReserveData(_transactionId, _leftoverReceiver, _nativeReserve);
        _executeSwaps(rd, _swaps, initialBalances);

        uint256 newBalance = LibAsset.getOwnBalance(finalTokenId) - initialBalance;

        if (newBalance < _minAmount) {
            revert CumulativeSlippageTooHigh(_minAmount, newBalance);
        }

        return newBalance;
    }

    /// Private Methods ///

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _transactionId the transaction id associated with the operation
    /// @param _swaps Array of data used to execute swaps
    /// @param _leftoverReceiver Address to send leftover tokens to
    /// @param _initialBalances Array of initial balances
    function _executeSwaps(
        bytes32 _transactionId,
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256[] memory _initialBalances
    ) internal noLeftovers(_swaps, _leftoverReceiver, _initialBalances) {
        uint256 numSwaps = _swaps.length;
        for (uint256 i = 0; i < numSwaps; ) {
            LibSwap.SwapData calldata currentSwap = _swaps[i];

            if (
                !((LibAsset.isNativeAsset(currentSwap.sendingAssetId) ||
                    LibAllowList.contractIsAllowed(currentSwap.approveTo)) &&
                    LibAllowList.contractIsAllowed(currentSwap.callTo) &&
                    LibAllowList.selectorIsAllowed(bytes4(currentSwap.callData[:4])))
            ) revert ContractCallNotAllowed();

            LibSwap.swap(_transactionId, currentSwap);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _reserveData Data passed used to reserve native tokens
    /// @param _swaps Array of data used to execute swaps
    function _executeSwaps(
        ReserveData memory _reserveData,
        LibSwap.SwapData[] calldata _swaps,
        uint256[] memory _initialBalances
    ) internal noLeftoversReserve(_swaps, _reserveData.leftoverReceiver, _initialBalances, _reserveData.nativeReserve) {
        uint256 numSwaps = _swaps.length;
        for (uint256 i = 0; i < numSwaps; ) {
            LibSwap.SwapData calldata currentSwap = _swaps[i];

            if (
                !((LibAsset.isNativeAsset(currentSwap.sendingAssetId) ||
                    LibAllowList.contractIsAllowed(currentSwap.approveTo)) &&
                    LibAllowList.contractIsAllowed(currentSwap.callTo) &&
                    LibAllowList.selectorIsAllowed(bytes4(currentSwap.callData[:4])))
            ) revert ContractCallNotAllowed();

            LibSwap.swap(_reserveData.transactionId, currentSwap);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Fetches balances of tokens to be swapped before swapping.
    /// @param _swaps Array of data used to execute swaps
    /// @return uint256[] Array of token balances.
    function _fetchBalances(LibSwap.SwapData[] calldata _swaps) private view returns (uint256[] memory) {
        uint256 numSwaps = _swaps.length;
        uint256[] memory balances = new uint256[](numSwaps);
        address asset;
        for (uint256 i = 0; i < numSwaps; ) {
            asset = _swaps[i].receivingAssetId;
            balances[i] = LibAsset.getOwnBalance(asset);

            if (LibAsset.isNativeAsset(asset)) {
                balances[i] -= msg.value;
            }

            unchecked {
                ++i;
            }
        }

        return balances;
    }
}

contract Validatable {
    modifier validateBridgeData(ILiFi.BridgeData memory _bridgeData) {
        if (LibUtil.isZeroAddress(_bridgeData.receiver)) {
            revert InvalidReceiver();
        }
        if (_bridgeData.minAmount == 0) {
            revert InvalidAmount();
        }
        _;
    }

    modifier noNativeAsset(ILiFi.BridgeData memory _bridgeData) {
        if (LibAsset.isNativeAsset(_bridgeData.sendingAssetId)) {
            revert NativeAssetNotSupported();
        }
        _;
    }

    modifier onlyAllowSourceToken(ILiFi.BridgeData memory _bridgeData, address _token) {
        if (_bridgeData.sendingAssetId != _token) {
            revert InvalidSendingToken();
        }
        _;
    }

    modifier onlyAllowDestinationChain(ILiFi.BridgeData memory _bridgeData, uint256 _chainId) {
        if (_bridgeData.destinationChainId != _chainId) {
            revert InvalidDestinationChain();
        }
        _;
    }

    modifier containsSourceSwaps(ILiFi.BridgeData memory _bridgeData) {
        if (!_bridgeData.hasSourceSwaps) {
            revert InformationMismatch();
        }
        _;
    }

    modifier doesNotContainSourceSwaps(ILiFi.BridgeData memory _bridgeData) {
        if (_bridgeData.hasSourceSwaps) {
            revert InformationMismatch();
        }
        _;
    }

    modifier doesNotContainDestinationCalls(ILiFi.BridgeData memory _bridgeData) {
        if (_bridgeData.hasDestinationCall) {
            revert InformationMismatch();
        }
        _;
    }
}

/// @title Hyphen Facet
/// @author LI.FI (https://li.fi)
/// @notice Provides functionality for bridging through Hyphen
contract HyphenFacet is ILiFi, ReentrancyGuard, SwapperV2, Validatable {
    /// Storage ///

    /// @notice The contract address of the router on the source chain.
    IHyphenRouter private immutable router;

    /// Constructor ///

    /// @notice Initialize the contract.
    /// @param _router The contract address of the router on the source chain.
    constructor(IHyphenRouter _router) {
        router = _router;
    }

    /// External Methods ///

    /// @notice Bridges tokens via Hyphen
    /// @param _bridgeData the core information needed for bridging
    function startBridgeTokensViaHyphen(ILiFi.BridgeData memory _bridgeData)
        external
        payable
        refundExcessNative(payable(msg.sender))
        doesNotContainSourceSwaps(_bridgeData)
        doesNotContainDestinationCalls(_bridgeData)
        validateBridgeData(_bridgeData)
        nonReentrant
    {
        LibAsset.depositAsset(_bridgeData.sendingAssetId, _bridgeData.minAmount);
        _startBridge(_bridgeData);
    }

    /// @notice Performs a swap before bridging via Hyphen
    /// @param _bridgeData the core information needed for bridging
    /// @param _swapData an array of swap related data for performing swaps before bridging
    function swapAndStartBridgeTokensViaHyphen(
        ILiFi.BridgeData memory _bridgeData,
        LibSwap.SwapData[] calldata _swapData
    )
        external
        payable
        refundExcessNative(payable(msg.sender))
        containsSourceSwaps(_bridgeData)
        doesNotContainDestinationCalls(_bridgeData)
        validateBridgeData(_bridgeData)
        nonReentrant
    {
        _bridgeData.minAmount = _depositAndSwap(
            _bridgeData.transactionId,
            _bridgeData.minAmount,
            _swapData,
            payable(msg.sender)
        );
        _startBridge(_bridgeData);
    }

    /// Private Methods ///

    /// @dev Contains the business logic for the bridge via Hyphen
    /// @param _bridgeData the core information needed for bridging
    function _startBridge(ILiFi.BridgeData memory _bridgeData) private {
        if (!LibAsset.isNativeAsset(_bridgeData.sendingAssetId)) {
            // Give the Hyphen router approval to bridge tokens
            LibAsset.maxApproveERC20(IERC20(_bridgeData.sendingAssetId), address(router), _bridgeData.minAmount);

            router.depositErc20(
                _bridgeData.destinationChainId,
                _bridgeData.sendingAssetId,
                _bridgeData.receiver,
                _bridgeData.minAmount,
                "LIFI"
            );
        } else {
            router.depositNative{ value: _bridgeData.minAmount }(
                _bridgeData.receiver,
                _bridgeData.destinationChainId,
                "LIFI"
            );
        }

        emit LiFiTransferStarted(_bridgeData);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IHyphenRouter","name":"_router","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ContractCallNotAllowed","type":"error"},{"inputs":[{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"receivedAmount","type":"uint256"}],"name":"CumulativeSlippageTooHigh","type":"error"},{"inputs":[],"name":"InformationMismatch","type":"error"},{"inputs":[{"internalType":"uint256","name":"required","type":"uint256"},{"internalType":"uint256","name":"balance","type":"uint256"}],"name":"InsufficientBalance","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidContract","type":"error"},{"inputs":[],"name":"InvalidReceiver","type":"error"},{"inputs":[],"name":"NativeAssetTransferFailed","type":"error"},{"inputs":[],"name":"NoSwapDataProvided","type":"error"},{"inputs":[],"name":"NoSwapFromZeroBalance","type":"error"},{"inputs":[],"name":"NoTransferToNullAddress","type":"error"},{"inputs":[],"name":"NullAddrIsNotAValidSpender","type":"error"},{"inputs":[],"name":"NullAddrIsNotAnERC20Token","type":"error"},{"inputs":[],"name":"ReentrancyError","type":"error"},{"inputs":[],"name":"SliceOutOfBounds","type":"error"},{"inputs":[],"name":"SliceOverflow","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"LiFiTransferCompleted","type":"event"},{"anonymous":false,"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"bridge","type":"string"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"bool","name":"hasSourceSwaps","type":"bool"},{"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"indexed":false,"internalType":"struct ILiFi.BridgeData","name":"bridgeData","type":"tuple"}],"name":"LiFiTransferStarted","type":"event"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"bridge","type":"string"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"bool","name":"hasSourceSwaps","type":"bool"},{"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"internalType":"struct ILiFi.BridgeData","name":"_bridgeData","type":"tuple"}],"name":"startBridgeTokensViaHyphen","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"bridge","type":"string"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"bool","name":"hasSourceSwaps","type":"bool"},{"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"internalType":"struct ILiFi.BridgeData","name":"_bridgeData","type":"tuple"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"},{"internalType":"bool","name":"requiresDeposit","type":"bool"}],"internalType":"struct LibSwap.SwapData[]","name":"_swapData","type":"tuple[]"}],"name":"swapAndStartBridgeTokensViaHyphen","outputs":[],"stateMutability":"payable","type":"function"}]

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

0000000000000000000000002a5c2568b10a0e826bfa892cf21ba7218310180b

-----Decoded View---------------
Arg [0] : _router (address): 0x2a5c2568b10a0e826bfa892cf21ba7218310180b

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000002a5c2568b10a0e826bfa892cf21ba7218310180b