Contract 0x2e618eabe66818f4c6718c24f59c5694f0b2735a 6

/**
 *Submitted for verification at polygonscan.com on 2021-07-15
*/

// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/GSN/Context.sol


pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol


pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) internal _balances;

    mapping (address => mapping (address => uint256)) internal _allowances;

    uint256 internal _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/access/Ownable.sol


pragma solidity ^0.6.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}


// pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}



// pragma solidity >=0.6.2;

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}


// File: contracts/FarmToken.sol

pragma solidity 0.6.12;


// SIMP Token
contract SIMPToken is ERC20("SIMP Token", "SIMP"), Ownable {
    uint256 public _reservePrice = 8;
    
    IUniswapV2Router02 public immutable uniswapV2Router;
    address public immutable uniswapV2Pair;
    
    constructor() public {
        _setupDecimals(9);
        _mint(msg.sender, 1000 * (10**12) * (10 ** uint256(decimals())));
        
        // QuickSwapRouter on Polygon Mainnet: 0xa5E0829CaCEd8fFDD4De3c43696c57F7D7A678ff
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0xa5E0829CaCEd8fFDD4De3c43696c57F7D7A678ff);
         // Create a uniswap pair for this new token
        uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());
        // set the rest of the contract variables
        uniswapV2Router = _uniswapV2Router;
        
        emit Transfer(address(0), _msgSender(), 1000 * (10**12) * (10 ** uint256(decimals())));
	}

    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (Farm).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
    }
    
    function setReservePrice(uint256 reservePrice) external onlyOwner() {
        _reservePrice = reservePrice;
    }
    
    function _transfer(address sender, address recipient, uint256 amount) internal virtual override {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        
        uint256 ftBal = balanceOf(uniswapV2Pair);
        uint256 ethBal = IERC20(uniswapV2Router.WETH()).balanceOf(uniswapV2Pair);
        
        if (recipient == uniswapV2Pair && sender != owner()) {
            require(ftBal.div(_reservePrice) < ethBal, "Locking in the price!");
        }

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"_reservePrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"reservePrice","type":"uint256"}],"name":"setReservePrice","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniswapV2Pair","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"uniswapV2Router","outputs":[{"internalType":"contract IUniswapV2Router02","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

60c060405260086006553480156200001657600080fd5b50604080518082018252600a81526929a4a6a8102a37b5b2b760b11b602080830191825283518085019094526004845263053494d560e41b90840152815191929162000065916003916200049d565b5080516200007b9060049060208401906200049d565b50506005805460ff191660121790555060006200009762000315565b60058054610100600160a81b0319166101006001600160a01b03841690810291909117909155604051919250906000907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0908290a350620000f9600962000319565b6200012333620001086200032f565b60ff16600a0a66038d7ea4c68000026200033860201b60201c565b600073a5e0829caced8ffdd4de3c43696c57f7d7a678ff9050806001600160a01b031663c45a01556040518163ffffffff1660e01b815260040160206040518083038186803b1580156200017657600080fd5b505afa1580156200018b573d6000803e3d6000fd5b505050506040513d6020811015620001a257600080fd5b5051604080516315ab88c960e31b815290516001600160a01b039283169263c9c653969230929186169163ad5c464891600480820192602092909190829003018186803b158015620001f357600080fd5b505afa15801562000208573d6000803e3d6000fd5b505050506040513d60208110156200021f57600080fd5b5051604080516001600160e01b031960e086901b1681526001600160a01b0393841660048201529290911660248301525160448083019260209291908290030181600087803b1580156200027257600080fd5b505af115801562000287573d6000803e3d6000fd5b505050506040513d60208110156200029e57600080fd5b50516001600160601b0319606091821b811660a0529082901b16608052620002c562000315565b6001600160a01b0316600060008051602062001760833981519152620002ea6200032f565b60ff16600a0a66038d7ea4c68000026040518082815260200191505060405180910390a35062000539565b3390565b6005805460ff191660ff92909216919091179055565b60055460ff1690565b6001600160a01b03821662000394576040805162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f206164647265737300604482015290519081900360640190fd5b620003a26000838362000436565b620003be816002546200043b60201b620009851790919060201c565b6002556001600160a01b03821660009081526020818152604090912054620003f1918390620009856200043b821b17901c565b6001600160a01b038316600081815260208181526040808320949094558351858152935192939192600080516020620017608339815191529281900390910190a35050565b505050565b60008282018381101562000496576040805162461bcd60e51b815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f770000000000604482015290519081900360640190fd5b9392505050565b828054600181600116156101000203166002900490600052602060002090601f016020900481019282601f10620004e057805160ff191683800117855562000510565b8280016001018555821562000510579182015b8281111562000510578251825591602001919060010190620004f3565b506200051e92915062000522565b5090565b5b808211156200051e576000815560010162000523565b60805160601c60a05160601c6111e9620005776000398061060e5280610b675280610c2c5280610cae52508061049b5280610b9152506111e96000f3fe608060405234801561001057600080fd5b50600436106101215760003560e01c806370a08231116100ad578063a9059cbb11610071578063a9059cbb14610341578063b1b5ab781461036d578063ce9c7c0d14610375578063dd62ed3e14610392578063f2fde38b146103c057610121565b806370a08231146102d7578063715018a6146102fd5780638da5cb5b1461030557806395d89b411461030d578063a457c2d71461031557610121565b806323b872dd116100f457806323b872dd14610221578063313ce56714610257578063395093511461027557806340c10f19146102a157806349bd5a5e146102cf57610121565b806306fdde0314610126578063095ea7b3146101a35780631694505e146101e357806318160ddd14610207575b600080fd5b61012e6103e6565b6040805160208082528351818301528351919283929083019185019080838360005b83811015610168578181015183820152602001610150565b50505050905090810190601f1680156101955780820380516001836020036101000a031916815260200191505b509250505060405180910390f35b6101cf600480360360408110156101b957600080fd5b506001600160a01b03813516906020013561047c565b604080519115158252519081900360200190f35b6101eb610499565b604080516001600160a01b039092168252519081900360200190f35b61020f6104bd565b60408051918252519081900360200190f35b6101cf6004803603606081101561023757600080fd5b506001600160a01b038135811691602081013590911690604001356104c3565b61025f61054a565b6040805160ff9092168252519081900360200190f35b6101cf6004803603604081101561028b57600080fd5b506001600160a01b038135169060200135610553565b6102cd600480360360408110156102b757600080fd5b506001600160a01b0381351690602001356105a1565b005b6101eb61060c565b61020f600480360360208110156102ed57600080fd5b50356001600160a01b0316610630565b6102cd61064b565b6101eb6106f8565b61012e61070c565b6101cf6004803603604081101561032b57600080fd5b506001600160a01b03813516906020013561076d565b6101cf6004803603604081101561035757600080fd5b506001600160a01b0381351690602001356107d5565b61020f6107e9565b6102cd6004803603602081101561038b57600080fd5b50356107ef565b61020f600480360360408110156103a857600080fd5b506001600160a01b0381358116916020013516610851565b6102cd600480360360208110156103d657600080fd5b50356001600160a01b031661087c565b60038054604080516020601f60026000196101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156104725780601f1061044757610100808354040283529160200191610472565b820191906000526020600020905b81548152906001019060200180831161045557829003601f168201915b5050505050905090565b60006104906104896109e6565b84846109ea565b50600192915050565b7f000000000000000000000000000000000000000000000000000000000000000081565b60025490565b60006104d0848484610ad6565b610540846104dc6109e6565b61053b856040518060600160405280602881526020016110fe602891396001600160a01b038a1660009081526001602052604081209061051a6109e6565b6001600160a01b031681526020810191909152604001600020549190610e39565b6109ea565b5060019392505050565b60055460ff1690565b60006104906105606109e6565b8461053b85600160006105716109e6565b6001600160a01b03908116825260208083019390935260409182016000908120918c168152925290205490610985565b6105a96109e6565b60055461010090046001600160a01b039081169116146105fe576040805162461bcd60e51b81526020600482018190526024820152600080516020611126833981519152604482015290519081900360640190fd5b6106088282610ed0565b5050565b7f000000000000000000000000000000000000000000000000000000000000000081565b6001600160a01b031660009081526020819052604090205490565b6106536109e6565b60055461010090046001600160a01b039081169116146106a8576040805162461bcd60e51b81526020600482018190526024820152600080516020611126833981519152604482015290519081900360640190fd5b60055460405160009161010090046001600160a01b0316907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0908390a360058054610100600160a81b0319169055565b60055461010090046001600160a01b031690565b60048054604080516020601f60026000196101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156104725780601f1061044757610100808354040283529160200191610472565b600061049061077a6109e6565b8461053b8560405180606001604052806025815260200161118f60259139600160006107a46109e6565b6001600160a01b03908116825260208083019390935260409182016000908120918d16815292529020549190610e39565b60006104906107e26109e6565b8484610ad6565b60065481565b6107f76109e6565b60055461010090046001600160a01b0390811691161461084c576040805162461bcd60e51b81526020600482018190526024820152600080516020611126833981519152604482015290519081900360640190fd5b600655565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205490565b6108846109e6565b60055461010090046001600160a01b039081169116146108d9576040805162461bcd60e51b81526020600482018190526024820152600080516020611126833981519152604482015290519081900360640190fd5b6001600160a01b03811661091e5760405162461bcd60e51b81526004018080602001828103825260268152602001806110906026913960400191505060405180910390fd5b6005546040516001600160a01b0380841692610100900416907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a3600580546001600160a01b0390921661010002610100600160a81b0319909216919091179055565b6000828201838110156109df576040805162461bcd60e51b815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f770000000000604482015290519081900360640190fd5b9392505050565b3390565b6001600160a01b038316610a2f5760405162461bcd60e51b815260040180806020018281038252602481526020018061116b6024913960400191505060405180910390fd5b6001600160a01b038216610a745760405162461bcd60e51b81526004018080602001828103825260228152602001806110b66022913960400191505060405180910390fd5b6001600160a01b03808416600081815260016020908152604080832094871680845294825291829020859055815185815291517f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9259281900390910190a3505050565b6001600160a01b038316610b1b5760405162461bcd60e51b81526004018080602001828103825260258152602001806111466025913960400191505060405180910390fd5b6001600160a01b038216610b605760405162461bcd60e51b815260040180806020018281038252602381526020018061106d6023913960400191505060405180910390fd5b6000610b8b7f0000000000000000000000000000000000000000000000000000000000000000610630565b905060007f00000000000000000000000000000000000000000000000000000000000000006001600160a01b031663ad5c46486040518163ffffffff1660e01b815260040160206040518083038186803b158015610be857600080fd5b505afa158015610bfc573d6000803e3d6000fd5b505050506040513d6020811015610c1257600080fd5b5051604080516370a0823160e01b81526001600160a01b037f000000000000000000000000000000000000000000000000000000000000000081166004830152915191909216916370a08231916024808301926020929190829003018186803b158015610c7e57600080fd5b505afa158015610c92573d6000803e3d6000fd5b505050506040513d6020811015610ca857600080fd5b505190507f00000000000000000000000000000000000000000000000000000000000000006001600160a01b03908116908516148015610d015750610ceb6106f8565b6001600160a01b0316856001600160a01b031614155b15610d665780610d1c60065484610fc090919063ffffffff16565b10610d66576040805162461bcd60e51b81526020600482015260156024820152744c6f636b696e6720696e207468652070726963652160581b604482015290519081900360640190fd5b610d71858585611002565b610dae836040518060600160405280602681526020016110d8602691396001600160a01b0388166000908152602081905260409020549190610e39565b6001600160a01b038087166000908152602081905260408082209390935590861681522054610ddd9084610985565b6001600160a01b038086166000818152602081815260409182902094909455805187815290519193928916927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef92918290030190a35050505050565b60008184841115610ec85760405162461bcd60e51b81526004018080602001828103825283818151815260200191508051906020019080838360005b83811015610e8d578181015183820152602001610e75565b50505050905090810190601f168015610eba5780820380516001836020036101000a031916815260200191505b509250505060405180910390fd5b505050900390565b6001600160a01b038216610f2b576040805162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f206164647265737300604482015290519081900360640190fd5b610f3760008383611002565b600254610f449082610985565b6002556001600160a01b038216600090815260208190526040902054610f6a9082610985565b6001600160a01b0383166000818152602081815260408083209490945583518581529351929391927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9281900390910190a35050565b60006109df83836040518060400160405280601a81526020017f536166654d6174683a206469766973696f6e206279207a65726f000000000000815250611007565b505050565b600081836110565760405162461bcd60e51b8152602060048201818152835160248401528351909283926044909101919085019080838360008315610e8d578181015183820152602001610e75565b50600083858161106257fe5b049594505050505056fe45524332303a207472616e7366657220746f20746865207a65726f20616464726573734f776e61626c653a206e6577206f776e657220697320746865207a65726f206164647265737345524332303a20617070726f766520746f20746865207a65726f206164647265737345524332303a207472616e7366657220616d6f756e7420657863656564732062616c616e636545524332303a207472616e7366657220616d6f756e74206578636565647320616c6c6f77616e63654f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657245524332303a207472616e736665722066726f6d20746865207a65726f206164647265737345524332303a20617070726f76652066726f6d20746865207a65726f206164647265737345524332303a2064656372656173656420616c6c6f77616e63652062656c6f77207a65726fa26469706673582212203f36983fa68eddf660a1c1e2fc99bdff00dfcc128feea52214cc09c445b9724b64736f6c634300060c0033ddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef

36910:2155:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17628:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19734:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19734:169:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;37021:51;;;:::i;:::-;;;;-1:-1:-1;;;;;37021:51:0;;;;;;;;;;;;;;18703:100;;;:::i;:::-;;;;;;;;;;;;;;;;20377:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;20377:321:0;;;;;;;;;;;;;;;;;:::i;18555:83::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;21107:218;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21107:218:0;;;;;;;;:::i;37965:99::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;37965:99:0;;;;;;;;:::i;:::-;;37079:38;;;:::i;18866:119::-;;;;;;;;;;;;;;;;-1:-1:-1;18866:119:0;-1:-1:-1;;;;;18866:119:0;;:::i;28179:148::-;;;:::i;27537:79::-;;;:::i;17830:87::-;;;:::i;21828:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;21828:269:0;;;;;;;;:::i;19198:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19198:175:0;;;;;;;;:::i;36976:32::-;;;:::i;38076:115::-;;;;;;;;;;;;;;;;-1:-1:-1;38076:115:0;;:::i;19436:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;19436:151:0;;;;;;;;;;:::i;28482:244::-;;;;;;;;;;;;;;;;-1:-1:-1;28482:244:0;-1:-1:-1;;;;;28482:244:0;;:::i;17628:83::-;17698:5;17691:12;;;;;;;;-1:-1:-1;;17691:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17665:13;;17691:12;;17698:5;;17691:12;;17698:5;17691:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17628:83;:::o;19734:169::-;19817:4;19834:39;19843:12;:10;:12::i;:::-;19857:7;19866:6;19834:8;:39::i;:::-;-1:-1:-1;19891:4:0;19734:169;;;;:::o;37021:51::-;;;:::o;18703:100::-;18783:12;;18703:100;:::o;20377:321::-;20483:4;20500:36;20510:6;20518:9;20529:6;20500:9;:36::i;:::-;20547:121;20556:6;20564:12;:10;:12::i;:::-;20578:89;20616:6;20578:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;20578:19:0;;;;;;:11;:19;;;;;;20598:12;:10;:12::i;:::-;-1:-1:-1;;;;;20578:33:0;;;;;;;;;;;;-1:-1:-1;20578:33:0;;;:89;:37;:89::i;:::-;20547:8;:121::i;:::-;-1:-1:-1;20686:4:0;20377:321;;;;;:::o;18555:83::-;18621:9;;;;18555:83;:::o;21107:218::-;21195:4;21212:83;21221:12;:10;:12::i;:::-;21235:7;21244:50;21283:10;21244:11;:25;21256:12;:10;:12::i;:::-;-1:-1:-1;;;;;21244:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;21244:25:0;;;:34;;;;;;;;;;;:38;:50::i;37965:99::-;27759:12;:10;:12::i;:::-;27749:6;;;;;-1:-1:-1;;;;;27749:6:0;;;:22;;;27741:67;;;;;-1:-1:-1;;;27741:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;27741:67:0;;;;;;;;;;;;;;;38037:19:::1;38043:3;38048:7;38037:5;:19::i;:::-;37965:99:::0;;:::o;37079:38::-;;;:::o;18866:119::-;-1:-1:-1;;;;;18959:18:0;18932:7;18959:18;;;;;;;;;;;;18866:119::o;28179:148::-;27759:12;:10;:12::i;:::-;27749:6;;;;;-1:-1:-1;;;;;27749:6:0;;;:22;;;27741:67;;;;;-1:-1:-1;;;27741:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;27741:67:0;;;;;;;;;;;;;;;28270:6:::1;::::0;28249:40:::1;::::0;28286:1:::1;::::0;28270:6:::1;::::0;::::1;-1:-1:-1::0;;;;;28270:6:0::1;::::0;28249:40:::1;::::0;28286:1;;28249:40:::1;28300:6;:19:::0;;-1:-1:-1;;;;;;28300:19:0::1;::::0;;28179:148::o;27537:79::-;27602:6;;;;;-1:-1:-1;;;;;27602:6:0;;27537:79::o;17830:87::-;17902:7;17895:14;;;;;;;;-1:-1:-1;;17895:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17869:13;;17895:14;;17902:7;;17895:14;;17902:7;17895:14;;;;;;;;;;;;;;;;;;;;;;;;21828:269;21921:4;21938:129;21947:12;:10;:12::i;:::-;21961:7;21970:96;22009:15;21970:96;;;;;;;;;;;;;;;;;:11;:25;21982:12;:10;:12::i;:::-;-1:-1:-1;;;;;21970:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;21970:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;19198:175::-;19284:4;19301:42;19311:12;:10;:12::i;:::-;19325:9;19336:6;19301:9;:42::i;36976:32::-;;;;:::o;38076:115::-;27759:12;:10;:12::i;:::-;27749:6;;;;;-1:-1:-1;;;;;27749:6:0;;;:22;;;27741:67;;;;;-1:-1:-1;;;27741:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;27741:67:0;;;;;;;;;;;;;;;38155:13:::1;:28:::0;38076:115::o;19436:151::-;-1:-1:-1;;;;;19552:18:0;;;19525:7;19552:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;19436:151::o;28482:244::-;27759:12;:10;:12::i;:::-;27749:6;;;;;-1:-1:-1;;;;;27749:6:0;;;:22;;;27741:67;;;;;-1:-1:-1;;;27741:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;27741:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;28571:22:0;::::1;28563:73;;;;-1:-1:-1::0;;;28563:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28673:6;::::0;28652:38:::1;::::0;-1:-1:-1;;;;;28652:38:0;;::::1;::::0;28673:6:::1;::::0;::::1;;::::0;28652:38:::1;::::0;;;::::1;28701:6;:17:::0;;-1:-1:-1;;;;;28701:17:0;;::::1;;;-1:-1:-1::0;;;;;;28701:17:0;;::::1;::::0;;;::::1;::::0;;28482:244::o;4735:181::-;4793:7;4825:5;;;4849:6;;;;4841:46;;;;;-1:-1:-1;;;4841:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;4907:1;4735:181;-1:-1:-1;;;4735:181:0:o;657:106::-;745:10;657:106;:::o;24975:346::-;-1:-1:-1;;;;;25077:19:0;;25069:68;;;;-1:-1:-1;;;25069:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25156:21:0;;25148:68;;;;-1:-1:-1;;;25148:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25229:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;25281:32;;;;;;;;;;;;;;;;;24975:346;;;:::o;38203:859::-;-1:-1:-1;;;;;38318:20:0;;38310:70;;;;-1:-1:-1;;;38310:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;38399:23:0;;38391:71;;;;-1:-1:-1;;;38391:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;38483:13;38499:24;38509:13;38499:9;:24::i;:::-;38483:40;;38534:14;38558:15;-1:-1:-1;;;;;38558:20:0;;:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;38558:22:0;38551:55;;;-1:-1:-1;;;38551:55:0;;-1:-1:-1;;;;;38592:13:0;38551:55;;;;;;;;:40;;;;;;;:55;;;;;38558:22;;38551:55;;;;;;;:40;:55;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;38551:55:0;;-1:-1:-1;38644:13:0;-1:-1:-1;;;;;38631:26:0;;;;;;;:47;;;;;38671:7;:5;:7::i;:::-;-1:-1:-1;;;;;38661:17:0;:6;-1:-1:-1;;;;;38661:17:0;;;38631:47;38627:147;;;38730:6;38703:24;38713:13;;38703:5;:9;;:24;;;;:::i;:::-;:33;38695:67;;;;;-1:-1:-1;;;38695:67:0;;;;;;;;;;;;-1:-1:-1;;;38695:67:0;;;;;;;;;;;;;;;38786:47;38807:6;38815:9;38826:6;38786:20;:47::i;:::-;38866:71;38888:6;38866:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;38866:17:0;;:9;:17;;;;;;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;38846:17:0;;;:9;:17;;;;;;;;;;;:91;;;;38971:20;;;;;;;:32;;38996:6;38971:24;:32::i;:::-;-1:-1:-1;;;;;38948:20:0;;;:9;:20;;;;;;;;;;;;:55;;;;39019:35;;;;;;;38948:20;;39019:35;;;;;;;;;;;;;38203:859;;;;;:::o;5638:192::-;5724:7;5760:12;5752:6;;;;5744:29;;;;-1:-1:-1;;;5744:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;5796:5:0;;;5638:192::o;23407:378::-;-1:-1:-1;;;;;23491:21:0;;23483:65;;;;;-1:-1:-1;;;23483:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;23561:49;23590:1;23594:7;23603:6;23561:20;:49::i;:::-;23638:12;;:24;;23655:6;23638:16;:24::i;:::-;23623:12;:39;-1:-1:-1;;;;;23694:18:0;;:9;:18;;;;;;;;;;;:30;;23717:6;23694:22;:30::i;:::-;-1:-1:-1;;;;;23673:18:0;;:9;:18;;;;;;;;;;;:51;;;;23740:37;;;;;;;23673:18;;:9;;23740:37;;;;;;;;;;23407:378;;:::o;7036:132::-;7094:7;7121:39;7125:1;7128;7121:39;;;;;;;;;;;;;;;;;:3;:39::i;26346:92::-;;;;:::o;7664:278::-;7750:7;7785:12;7778:5;7770:28;;;;-1:-1:-1;;;7770:28:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7809:9;7825:1;7821;:5;;;;;;;7664:278;-1:-1:-1;;;;;7664:278:0:o

ipfs://3f36983fa68eddf660a1c1e2fc99bdff00dfcc128feea52214cc09c445b9724b