Contract 0x216B4B4Ba9F3e719726886d34a177484278Bfcae 7

 

Contract Overview

Paraswap v5: Token Transfer Proxy
Balance:
0 MATIC

MATIC Value:
$0.00

Token:
 
Txn Hash Method
Block
From
To
Value [Txn Fee]
0x68816ff47f773cc0e5cc48034883a5f4c7a11a8b6ec2d8f1dfec1c2f7ef10680Transfer359541062022-11-23 5:04:2116 days 18 mins ago0xedc8aa358f3c81d291b5f0e964ac6265e3cd027e IN  Paraswap v5: Token Transfer Proxy0.0023738 MATIC0.000631353514 30.000167008
0xfa7ec84cd32831543bdea30b78f73e783ec8faab24c19d528fcf79614804412dRenounce Ownersh...357727192022-11-18 19:46:3220 days 9 hrs ago0xa2de223e17857e00b986ae659b49103b1b177c9a IN  Paraswap v5: Token Transfer Proxy0 MATIC0.000704820002 30.000000113
0xf6d04e32009f7727d34e380baa211ff9698d0a72b56aed99efcbf13fadb6ba59Swap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0023074100
0xac2b54657b27f513df5230e7c50c42ba79c2798a0ce8a51daeee6cb379f90e2dSwap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0023074100
0xfcf258a6d87d534650b09327b2880cf0553e273a1d56e028c0c6997d164aee79Swap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0023074100
0x92754d65a0aa5afd5f00c0e33b52431b1e4db639e0b8c701c35de12bf98393a4Swap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.001153750
0x804472cbf3e54faf9dda06ba7b6035a90760bc5bb48f61ee7407fbbfbdf84d2aSwap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.001153750
0x233fc2646653e0523000986cd28a3d9f03cfc6a0e3a0e6f1765c03a3c700b308Swap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.001153750
0xa3b0df5f3886d974514e318719df3aa46a6d64faecb296040459d62e6cada684Swap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.001153750
0xea430f753861a475daff507feb8c8e4861663998ffdccd72f961e1cab2185f97Swap Exact Token...357555682022-11-18 9:26:5120 days 19 hrs ago0xeec57a320a77780943c397b88629425cae79e81e IN  Paraswap v5: Token Transfer Proxy0 MATIC0.001153750
0x4088d928f72f4371c6e060b131f8a19efc691ba187e48eb4396e0670c890a189Transfer347798822022-10-25 11:29:1644 days 17 hrs ago0xbb8ecacd36fbc72a906ef26f59fb0c411c304a22 IN  Paraswap v5: Token Transfer Proxy0.1 MATIC0.002194290912 104.266615015
0x9f8a365908c58f960dbdff0d0128a942cd3d6dcbcef50cbfe3af24d2ef523336Transfer345883882022-10-20 19:03:1649 days 10 hrs ago0x3a0d24d59af3a3444dc6ef12cdb0c6e38c985288 IN  Paraswap v5: Token Transfer Proxy3.2410265 MATIC0.0071553340
0x9236d66dc8d65fbebee5bf27edad8646672991e792c28fcae06b970c92fd5878Transfer344568242022-10-17 12:25:0752 days 16 hrs ago0x0aa8973f16da6bfd6a8d7a3d235075426344d092 IN  Paraswap v5: Token Transfer Proxy2 MATIC0.00157083373 74.801606195
0xcd6db76528d535eca34a29178c88f00ab2babfc976ca507f71d02bdd707fab23Transfer344567892022-10-17 12:23:5752 days 16 hrs ago0x0aa8973f16da6bfd6a8d7a3d235075426344d092 IN  Paraswap v5: Token Transfer Proxy1 MATIC0.001692689302 80.604252507
0x4934bf25d329e75d08a08fca7b650d9e0a187a321f6669a08c2d3b5a1ffe6c7cTransfer344096532022-10-16 8:43:5353 days 20 hrs ago0x570e23307722c723303d5df18d0f3cb18018276f IN  Paraswap v5: Token Transfer Proxy0.03 MATIC0.002790176946 132.865568863
0x0945e7880e247fe64ea99acac6a85e664ff9dc84232b2411dd78c9c028ccd2e2Transfer343022482022-10-13 18:11:2656 days 11 hrs ago0x0aa8973f16da6bfd6a8d7a3d235075426344d092 IN  Paraswap v5: Token Transfer Proxy0.5 MATIC0.001721435184 81.973104045
0xb03eb0a53d07e644109bec18706328fcfe6120084132138c3780ed892f315455Transfer From302752462022-07-03 3:43:13159 days 1 hr ago0x6aa2cf46317042b32a26b819b8ed67683848274f IN  Paraswap v5: Token Transfer Proxy0 MATIC0.00083895889 33.418000003
0xc54263a7ead17861fdd1efd34428caa6791291b86d75410c6ff0e2043d02429bTransfer296859522022-06-17 18:30:16174 days 10 hrs ago0xb5b4f982439ad22f189b8544fcec4bc1a1360867 IN  Paraswap v5: Token Transfer Proxy0.02 MATIC0.000858975212 40.903581531
0x781b3f2724e190d02575b80b6a6a6f21c80a1c566e4f8e7f1db3e71c4724bed3Transfer265677612022-03-31 6:28:42252 days 22 hrs ago0xe892852ab797802860f1ff390dfd9e0c11d5f38d IN  Paraswap v5: Token Transfer Proxy0 MATIC0.000631367487 30.065118432
0xde09d7600af4fe340c3c2fd4848d8d89ec8962ae76882ac1b90f49edb852b812Simple Swap264721582022-03-28 19:38:01255 days 9 hrs ago0x481d6627ac34717d59fe07bd21e274539cc81687 IN  Paraswap v5: Token Transfer Proxy0.1 MATIC0.00084511734930.069999999
0xcd1312ed90d63aeb2e0d23268913d65f63c954c532e7b2511d1139e05d08a618Approve258301792022-03-11 13:35:34272 days 15 hrs ago0x1ef52f0bb4317af97d07835e1b0a96744260af8c IN  Paraswap v5: Token Transfer Proxy0 MATIC0.00066556938630.070000294
0x7b242ab41ad1889bbaff4fb5b45b7d76d29f1c3f65f5452684400d04eb03e54cAllowance257768632022-03-09 20:04:01274 days 9 hrs ago0x1ef52f0bb4317af97d07835e1b0a96744260af8c IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0000900774.1
0x421454f69245d59677f41a72f50787b07658f3a522d6600467c7c89282c611cbAllowance257768632022-03-09 20:04:01274 days 9 hrs ago0x1ef52f0bb4317af97d07835e1b0a96744260af8c IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0000900774.1
0x53f031fb9a1fae465fa4656e835b7258da6b4e8547fe1b3bcbee85cd21c393f8Allowance257768632022-03-09 20:04:01274 days 9 hrs ago0x1ef52f0bb4317af97d07835e1b0a96744260af8c IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0000900774.1
0x0501205b7014f21e408ba35631ea83a2d5de956d155b7f42efe8e680ba9ff153Allowance257768632022-03-09 20:04:01274 days 9 hrs ago0x1ef52f0bb4317af97d07835e1b0a96744260af8c IN  Paraswap v5: Token Transfer Proxy0 MATIC0.0000900774.1
[ Download CSV Export 
Latest 1 internal transaction
Parent Txn Hash Block From To Value
0xf7324cdcd2779a397a9cfcc4a6f3f6363506b4b4cdfa8cd21ac82d4d3e8aa5ca181189672021-08-18 11:43:46477 days 17 hrs ago Paraswap v5: Augustus Swapper  Contract Creation0 MATIC
[ Download CSV Export 
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
TokenTransferProxy

Compiler Version
v0.7.5+commit.eb77ed08

Optimization Enabled:
Yes with 1000000 runs

Other Settings:
default evmVersion, None license

Contract Source Code (Solidity)

/**
 *Submitted for verification at polygonscan.com on 2021-08-23
*/

// File: openzeppelin-solidity/contracts/utils/EnumerableSet.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// File: openzeppelin-solidity/contracts/utils/Address.sol



pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: openzeppelin-solidity/contracts/GSN/Context.sol



pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: openzeppelin-solidity/contracts/access/AccessControl.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context {
    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: original_contracts/routers/IRouter.sol

pragma solidity 0.7.5;

interface IRouter {

    /**
    * @dev Certain routers/exchanges needs to be initialized.
    * This method will be called from Augustus
    */
    function initialize(bytes calldata data) external;

    /**
    * @dev Returns unique identifier for the router
    */
    function getKey() external pure returns(bytes32);

    event Swapped(
        bytes16 uuid,
        address initiator,
        address indexed beneficiary,
        address indexed srcToken,
        address indexed destToken,
        uint256 srcAmount,
        uint256 receivedAmount,
        uint256 expectedAmount
    );

    event Bought(
        bytes16 uuid,
        address initiator,
        address indexed beneficiary,
        address indexed srcToken,
        address indexed destToken,
        uint256 srcAmount,
        uint256 receivedAmount
    );

    event FeeTaken(
        uint256 fee,
        uint256 partnerShare,
        uint256 paraswapShare
    );
}

// File: original_contracts/ITokenTransferProxy.sol

pragma solidity 0.7.5;


interface ITokenTransferProxy {

    function transferFrom(
        address token,
        address from,
        address to,
        uint256 amount
    )
        external;
}

// File: original_contracts/lib/Utils.sol

pragma solidity 0.7.5;
pragma experimental ABIEncoderV2;





interface IERC20Permit {
    function permit(address owner, address spender, uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
}

library Utils {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    address constant ETH_ADDRESS = address(
        0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
    );
    
    uint256 constant MAX_UINT = type(uint256).max;

    /**
   * @param fromToken Address of the source token
   * @param fromAmount Amount of source tokens to be swapped
   * @param toAmount Minimum destination token amount expected out of this swap
   * @param expectedAmount Expected amount of destination tokens without slippage
   * @param beneficiary Beneficiary address
   * 0 then 100% will be transferred to beneficiary. Pass 10000 for 100%
   * @param path Route to be taken for this swap to take place

   */
    struct SellData {
        address fromToken;
        uint256 fromAmount;
        uint256 toAmount;
        uint256 expectedAmount;
        address payable beneficiary;
        Utils.Path[] path;
        address payable partner;
        uint256 feePercent;
        bytes permit;
        uint256 deadline;
        bytes16 uuid;
    }

    struct MegaSwapSellData {
        address fromToken;
        uint256 fromAmount;
        uint256 toAmount;
        uint256 expectedAmount;
        address payable beneficiary;
        Utils.MegaSwapPath[] path;
        address payable partner;
        uint256 feePercent;
        bytes permit;
        uint256 deadline;
        bytes16 uuid;
    }

    struct SimpleData {
        address fromToken;
        address toToken;
        uint256 fromAmount;
        uint256 toAmount;
        uint256 expectedAmount;
        address[] callees;
        bytes exchangeData;
        uint256[] startIndexes;
        uint256[] values;
        address payable beneficiary;
        address payable partner;
        uint256 feePercent;
        bytes permit;
        uint256 deadline;
        bytes16 uuid;
    }

    struct Adapter {
        address payable adapter;
        uint256 percent;
        uint256 networkFee;
        Route[] route;
    }

    struct Route {
        uint256 index;//Adapter at which index needs to be used
        address targetExchange;
        uint percent;
        bytes payload;
        uint256 networkFee;//Network fee is associated with 0xv3 trades
    }

    struct MegaSwapPath {
        uint256 fromAmountPercent;
        Path[] path;
    }

    struct Path {
        address to;
        uint256 totalNetworkFee;//Network fee is associated with 0xv3 trades
        Adapter[] adapters;
    }

    function ethAddress() internal pure returns (address) {return ETH_ADDRESS;}

    function maxUint() internal pure returns (uint256) {return MAX_UINT;}

    function approve(
        address addressToApprove,
        address token,
        uint256 amount
    ) internal {
        if (token != ETH_ADDRESS) {
            IERC20 _token = IERC20(token);

            uint allowance = _token.allowance(address(this), addressToApprove);

            if (allowance < amount) {
                _token.safeApprove(addressToApprove, 0);
                _token.safeIncreaseAllowance(addressToApprove, MAX_UINT);
            }
        }
    }

    function transferTokens(
        address token,
        address payable destination,
        uint256 amount
    )
    internal
    {
        if (amount > 0) {
            if (token == ETH_ADDRESS) {
                (bool result, ) = destination.call{value: amount, gas: 10000}("");
                require(result, "Failed to transfer Ether");
            }
            else {
                IERC20(token).safeTransfer(destination, amount);
            }
        }

    }

    function tokenBalance(
        address token,
        address account
    )
    internal
    view
    returns (uint256)
    {
        if (token == ETH_ADDRESS) {
            return account.balance;
        } else {
            return IERC20(token).balanceOf(account);
        }
    }

    function permit(
        address token,
        bytes memory permit
    )
        internal
    {
        if (permit.length == 32 * 7) {
            (bool success,) = token.call(abi.encodePacked(IERC20Permit.permit.selector, permit));
            require(success, "Permit failed");
        }
    }

}

// File: original_contracts/adapters/IAdapter.sol

pragma solidity 0.7.5;



interface IAdapter {

    /**
    * @dev Certain adapters needs to be initialized.
    * This method will be called from Augustus
    */
    function initialize(bytes calldata data) external;

    /**
   * @dev The function which performs the swap on an exchange.
   * @param fromToken Address of the source token
   * @param toToken Address of the destination token
   * @param fromAmount Amount of source tokens to be swapped
   * @param networkFee Network fee to be used in this router
   * @param route Route to be followed
   */
    function swap(
        IERC20 fromToken,
        IERC20 toToken,
        uint256 fromAmount,
        uint256 networkFee,
        Utils.Route[] calldata route
    )
        external
        payable;
}

// File: openzeppelin-solidity/contracts/access/Ownable.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: original_contracts/TokenTransferProxy.sol

pragma solidity 0.7.5;







/**
* @dev Allows owner of the contract to transfer tokens on behalf of user.
* User will need to approve this contract to spend tokens on his/her behalf
* on Paraswap platform
*/
contract TokenTransferProxy is Ownable, ITokenTransferProxy {
    using SafeERC20 for IERC20;
    using Address for address;

    /**
    * @dev Allows owner of the contract to transfer tokens on user's behalf
    * @dev Swapper contract will be the owner of this contract
    * @param token Address of the token
    * @param from Address from which tokens will be transferred
    * @param to Receipent address of the tokens
    * @param amount Amount of tokens to transfer
    */
    function transferFrom(
        address token,
        address from,
        address to,
        uint256 amount
    )
        external
        override
        onlyOwner
    {   
        require(
            from == tx.origin ||
            from.isContract(),
            "Invalid from address"
        );
        
        IERC20(token).safeTransferFrom(from, to, amount);
    }
}

// File: original_contracts/AugustusStorage.sol

pragma solidity 0.7.5;


contract AugustusStorage {

    struct FeeStructure {
        uint256 partnerShare;
        bool noPositiveSlippage;
        bool positiveSlippageToUser;
        uint16 feePercent;
        string partnerId;
        bytes data;
    }

    ITokenTransferProxy internal tokenTransferProxy;
    address payable internal feeWallet;
    
    mapping(address => FeeStructure) internal registeredPartners;

    mapping (bytes4 => address) internal selectorVsRouter;
    mapping (bytes32 => bool) internal adapterInitialized;
    mapping (bytes32 => bytes) internal adapterVsData;

    mapping (bytes32 => bytes) internal routerData;
    mapping (bytes32 => bool) internal routerInitialized;


    bytes32 public constant WHITELISTED_ROLE = keccak256("WHITELISTED_ROLE");

    bytes32 public constant ROUTER_ROLE = keccak256("ROUTER_ROLE");

}

// File: original_contracts/AugustusSwapper.sol

pragma solidity 0.7.5;










contract AugustusSwapper is AugustusStorage, AccessControl {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event AdapterInitialized(address indexed adapter);

    event RouterInitialized(address indexed router);

    /**
     * @dev Throws if called by any account other than the admin.
     */
    modifier onlyAdmin() {
        require(hasRole(DEFAULT_ADMIN_ROLE, msg.sender), "caller is not the admin");
        _;
    }

    constructor(address payable _feeWallet) public {
        TokenTransferProxy lTokenTransferProxy = new TokenTransferProxy();
        tokenTransferProxy = ITokenTransferProxy(lTokenTransferProxy);
        feeWallet = _feeWallet;
        _setupRole(DEFAULT_ADMIN_ROLE, msg.sender);
    }
    
    receive () payable external {

    }

    fallback() external payable {
        bytes4 selector = msg.sig;
        //Figure out the router contract for the given function
        address implementation = getImplementation(selector);
        if (implementation == address(0)) {
            _revertWithData(
                abi.encodeWithSelector(
                    bytes4(keccak256("NotImplementedError(bytes4)")),
                    selector
                )
            );
        }

        //Delegate call to the router
        (bool success, bytes memory resultData) = implementation.delegatecall(msg.data);
        if (!success) {
            _revertWithData(resultData);
        }

        _returnWithData(resultData);
    }

    function initializeAdapter(address adapter, bytes calldata data) external onlyAdmin {

        require(
            hasRole(WHITELISTED_ROLE, adapter),
            "Exchange not whitelisted"
        );
        (bool success,) = adapter.delegatecall(abi.encodeWithSelector(IAdapter.initialize.selector, data));
        require(success, "Failed to initialize adapter");
        emit AdapterInitialized(adapter);
    }

    function initializeRouter(address router, bytes calldata data) external onlyAdmin {

        require(
            hasRole(ROUTER_ROLE, router),
            "Router not whitelisted"
        );
        (bool success,) = router.delegatecall(abi.encodeWithSelector(IRouter.initialize.selector, data));
        require(success, "Failed to initialize router");
        emit RouterInitialized(router);
    } 

    
    function getImplementation(bytes4 selector) public view returns(address) {
        return selectorVsRouter[selector];
    }

    function getVersion() external pure returns(string memory) {
        return "5.0.0";
    }

    function getPartnerFeeStructure(address partner) public view returns (FeeStructure memory) {
        return registeredPartners[partner];
    }

    function getFeeWallet() external view returns(address) {
        return feeWallet;
    }

    function setFeeWallet(address payable _feeWallet) external onlyAdmin {
        require(_feeWallet != address(0), "Invalid address");
        feeWallet = _feeWallet;
    }

    function registerPartner(
        address partner,
        uint256 _partnerShare,
        bool _noPositiveSlippage,
        bool _positiveSlippageToUser,
        uint16 _feePercent,
        string calldata partnerId,
        bytes calldata _data
    )
        external
        onlyAdmin
    {   
        require(partner != address(0), "Invalid partner");
        FeeStructure storage feeStructure = registeredPartners[partner];
        require(feeStructure.partnerShare == 0, "Already registered");
        require(_partnerShare > 0 && _partnerShare < 10000, "Invalid values");
        require(_feePercent <= 10000, "Invalid values");

        feeStructure.partnerShare = _partnerShare;
        feeStructure.noPositiveSlippage = _noPositiveSlippage;
        feeStructure.positiveSlippageToUser = _positiveSlippageToUser;
        feeStructure.partnerId = partnerId;
        feeStructure.feePercent = _feePercent;
        feeStructure.data = _data;
    }

    function setImplementation(bytes4 selector, address implementation) external onlyAdmin {
        require(
            hasRole(ROUTER_ROLE, implementation),
            "Router is not whitelisted"
        );
        selectorVsRouter[selector] = implementation;
    }

    /**
    * @dev Allows admin of the contract to transfer any tokens which are assigned to the contract
    * This method is for safety if by any chance tokens or ETHs are assigned to the contract by mistake
    * @dev token Address of the token to be transferred
    * @dev destination Recepient of the token
    * @dev amount Amount of tokens to be transferred
    */
    function transferTokens(
        address token,
        address payable destination,
        uint256 amount
    )
        external
        onlyAdmin
    {
        if (amount > 0) {
            if (token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)) {
                (bool result, ) = destination.call{value: amount, gas: 10000}("");
                require(result, "Failed to transfer Ether");
            }
            else {
                IERC20(token).safeTransfer(destination, amount);
            }
        }
    }

      function isAdapterInitialized(bytes32 key) public view returns(bool) {
        return adapterInitialized[key];
    }

    function getAdapterData(bytes32 key) public view returns(bytes memory) {
        return adapterVsData[key];
    }

    function isRouterInitialized(bytes32 key) public view returns (bool) {
        return routerInitialized[key];
    }

    function getRouterData(bytes32 key) public view returns (bytes memory) {
        return routerData[key];
    }

    function getTokenTransferProxy() public view returns (address) {
        return address(tokenTransferProxy);
    }

    function _revertWithData(bytes memory data) private pure {
        assembly { revert(add(data, 32), mload(data)) }
    }

    function _returnWithData(bytes memory data) private pure {
        assembly { return(add(data, 32), mload(data)) }
    }

}

Contract Security Audit

Contract ABI

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Deployed ByteCode Sourcemap

46630:894:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47127:394;;;;;;:::i;:::-;;:::i;:::-;;45799:148;;;:::i;45157:79::-;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;46102:244;;;;;;:::i;:::-;;:::i;47127:394::-;45379:12;:10;:12::i;:::-;45369:6;;:22;:6;;;:22;;;45361:67;;;;;;;;;;;;:::i;:::-;;;;;;;;;47345:17:::1;::::0;::::1;47353:9;47345:17;::::0;:51:::1;;;47379:17;:4;:15;;;:17::i;:::-;47323:121;;;;;;;;;;;;:::i;:::-;47465:48;:30;::::0;::::1;47496:4:::0;47502:2;47506:6;47465:30:::1;:48::i;:::-;47127:394:::0;;;;:::o;45799:148::-;45379:12;:10;:12::i;:::-;45369:6;;:22;:6;;;:22;;;45361:67;;;;;;;;;;;;:::i;:::-;45906:1:::1;45890:6:::0;;45869:40:::1;::::0;::::1;45890:6:::0;;::::1;::::0;45869:40:::1;::::0;45906:1;;45869:40:::1;45937:1;45920:19:::0;;;::::1;::::0;;45799:148::o;45157:79::-;45195:7;45222:6;;;45157:79;:::o;46102:244::-;45379:12;:10;:12::i;:::-;45369:6;;:22;:6;;;:22;;;45361:67;;;;;;;;;;;;:::i;:::-;46191:22:::1;::::0;::::1;46183:73;;;;;;;;;;;;:::i;:::-;46293:6;::::0;;46272:38:::1;::::0;::::1;::::0;;::::1;::::0;46293:6;::::1;::::0;46272:38:::1;::::0;::::1;46321:6;:17:::0;;;::::1;;::::0;;;::::1;::::0;;;::::1;::::0;;46102:244::o;17367:106::-;17455:10;17367:106;:::o;10470:422::-;10837:20;;10876:8;;10470:422;;;;:::o;34365:205::-;34466:96;34486:5;34516:27;;;34545:4;34551:2;34555:5;34493:68;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;36909:23;36935:69;36963:4;36935:69;;;;;;;;;;;;;;;;;36943:5;36935:27;;;;:69;;;;;:::i;:::-;37019:17;;36909:95;;-1:-1:-1;37019:21:0;37015:224;;37161:10;37150:30;;;;;;;;;;;;:::i;:::-;37142:85;;;;;;;;;;;;:::i;:::-;36485:761;;;:::o;13388:195::-;13491:12;13523:52;13545:6;13553:4;13559:1;13562:12;13523:21;:52::i;:::-;13516:59;;13388:195;;;;;;:::o;14440:530::-;14567:12;14625:5;14600:21;:30;;14592:81;;;;;;;;;;;;:::i;:::-;14692:18;14703:6;14692:10;:18::i;:::-;14684:60;;;;;;;;;;;;:::i;:::-;14818:12;14832:23;14859:6;:11;;14879:5;14887:4;14859:33;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;14817:75;;;;14910:52;14928:7;14937:10;14949:12;14910:17;:52::i;:::-;14903:59;14440:530;-1:-1:-1;;;;;;;14440:530:0:o;15976:742::-;16091:12;16120:7;16116:595;;;-1:-1:-1;16151:10:0;16144:17;;16116:595;16265:17;;:21;16261:439;;16528:10;16522:17;16589:15;16576:10;16572:2;16568:19;16561:44;16476:148;16671:12;16664:20;;;;;;;;;;;:::i;14:198:1:-;84:20;;144:42;133:54;;123:65;;113:2;;202:1;199;192:12;217:198;;329:2;317:9;308:7;304:23;300:32;297:2;;;350:6;342;335:22;297:2;378:31;399:9;378:31;:::i;420:419::-;;;;;583:3;571:9;562:7;558:23;554:33;551:2;;;605:6;597;590:22;551:2;633:31;654:9;633:31;:::i;:::-;623:41;;683:40;719:2;708:9;704:18;683:40;:::i;:::-;673:50;;742:40;778:2;767:9;763:18;742:40;:::i;:::-;541:298;;;;-1:-1:-1;732:50:1;;829:2;814:18;801:32;;-1:-1:-1;;541:298:1:o;844:297::-;;964:2;952:9;943:7;939:23;935:32;932:2;;;985:6;977;970:22;932:2;1022:9;1016:16;1075:5;1068:13;1061:21;1054:5;1051:32;1041:2;;1102:6;1094;1087:22;1146:274;;1313:6;1307:13;1329:53;1375:6;1370:3;1363:4;1355:6;1351:17;1329:53;:::i;:::-;1398:16;;;;;1283:137;-1:-1:-1;;1283:137:1:o;1425:226::-;1601:42;1589:55;;;;1571:74;;1559:2;1544:18;;1526:125::o;1656:398::-;1868:42;1937:15;;;1919:34;;1989:15;;;;1984:2;1969:18;;1962:43;2036:2;2021:18;;2014:34;;;;1846:2;1831:18;;1813:241::o;2059:442::-;;2208:2;2197:9;2190:21;2240:6;2234:13;2283:6;2278:2;2267:9;2263:18;2256:34;2299:66;2358:6;2353:2;2342:9;2338:18;2333:2;2325:6;2321:15;2299:66;:::i;:::-;2417:2;2405:15;2422:66;2401:88;2386:104;;;;2492:2;2382:113;;2180:321;-1:-1:-1;;2180:321:1:o;2506:402::-;2708:2;2690:21;;;2747:2;2727:18;;;2720:30;2786:34;2781:2;2766:18;;2759:62;2857:8;2852:2;2837:18;;2830:36;2898:3;2883:19;;2680:228::o;2913:402::-;3115:2;3097:21;;;3154:2;3134:18;;;3127:30;3193:34;3188:2;3173:18;;3166:62;3264:8;3259:2;3244:18;;3237:36;3305:3;3290:19;;3087:228::o;3320:344::-;3522:2;3504:21;;;3561:2;3541:18;;;3534:30;3600:22;3595:2;3580:18;;3573:50;3655:2;3640:18;;3494:170::o;3669:356::-;3871:2;3853:21;;;3890:18;;;3883:30;3949:34;3944:2;3929:18;;3922:62;4016:2;4001:18;;3843:182::o;4030:353::-;4232:2;4214:21;;;4271:2;4251:18;;;4244:30;4310:31;4305:2;4290:18;;4283:59;4374:2;4359:18;;4204:179::o;4388:406::-;4590:2;4572:21;;;4629:2;4609:18;;;4602:30;4668:34;4663:2;4648:18;;4641:62;4739:12;4734:2;4719:18;;4712:40;4784:3;4769:19;;4562:232::o;4799:258::-;4871:1;4881:113;4895:6;4892:1;4889:13;4881:113;;;4971:11;;;4965:18;4952:11;;;4945:39;4917:2;4910:10;4881:113;;;5012:6;5009:1;5006:13;5003:2;;;-1:-1:-1;;5047:1:1;5029:16;;5022:27;4852:205::o

Swarm Source

ipfs://a043bdd05a1c168f623a894430cb3a50964c5c00c776399fa2c32e4b6de6029a
Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.