Contract 0x1e37a59cb7da60c0b4273169eade2126adf6cd7e 1

/**
 *Submitted for verification at polygonscan.com on 2021-07-06
*/

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol

pragma solidity ^0.6.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol

pragma solidity ^0.6.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol

pragma solidity ^0.6.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: contractsToken.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;



contract PlatinToken is ERC20("PlatinumFinance Token", "PLATIN") {
    
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
        _moveDelegates(address(0), _delegates[_to], _amount);
    }

    // Copied and modified from YAM code:
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
    // Which is copied and modified from COMPOUND:
    // https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol

    /// @dev A record of each accounts delegate
    mapping (address => address) internal _delegates;

    /// @dev A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @dev A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    /// @dev The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    /// @dev The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    /// @dev The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @dev A record of states for signing / validating signatures
    mapping (address => uint) public nonces;

    /// @dev An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @dev An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);

    /**
     * @dev Delegate votes from `msg.sender` to `delegatee`
     * @param delegator The address to get delegatee for
     */
    function delegates(address delegator)
        external
        view
        returns (address)
    {
        return _delegates[delegator];
    }

    /**
    * @dev Delegate votes from `msg.sender` to `delegatee`
    * @param delegatee The address to delegate votes to
    */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @dev Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(
        address delegatee,
        uint nonce,
        uint expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
    {
        bytes32 domainSeparator = keccak256(
            abi.encode(
                DOMAIN_TYPEHASH,
                keccak256(bytes(name())),
                getChainId(),
                address(this)
            )
        );

        bytes32 structHash = keccak256(
            abi.encode(
                DELEGATION_TYPEHASH,
                delegatee,
                nonce,
                expiry
            )
        );

        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                domainSeparator,
                structHash
            )
        );

        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "PLATIN::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "PLATIN::delegateBySig: invalid nonce");
        require(now <= expiry, "PLATIN::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @dev Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account)
        external
        view
        returns (uint256)
    {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @dev Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber)
        external
        view
        returns (uint256)
    {
        require(blockNumber < block.number, "PLATIN::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee)
        internal
    {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator); // balance of underlying PLATIN (not scaled);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(
        address delegatee,
        uint32 nCheckpoints,
        uint256 oldVotes,
        uint256 newVotes
    )
        internal
    {
        uint32 blockNumber = safe32(block.number, "PLATIN::_writeCheckpoint: block number exceeds 32 bits");

        if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal pure returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }
}


// File: contracts/MasterChef.sol

pragma solidity 0.6.12;







// MasterChef is the master of Platin. He can make Platin and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once Platin is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract MasterChef is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;         // How many LP tokens the user has provided.
        uint256 rewardDebt;     // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of PLATIN
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accPlatinPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accPlatinPerShare` (and `lastRewardBlock`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. PLATIN to distribute per block.
        uint256 lastRewardBlock;  // Last block number that PLATIN distribution occurs.
        uint256 accPlatinPerShare;   // Accumulated PLATIN per share, times 1e18. See below.
        uint16 depositFeeBP;      // Deposit fee in basis points
    }

    // The PLATIN TOKEN!
    PlatinToken public platin;
    address public devAddress;
    address public feeAddress;
    // address public vaultAddress;

    // PLATIN tokens created per block.
    uint256 public platinPerBlock = 0.004 ether;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;
    // Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block number when PLATIN mining starts.
    uint256 public startBlock;


    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event SetFeeAddress(address indexed user, address indexed newAddress);
    event SetDevAddress(address indexed user, address indexed newAddress);
    // event SetVaultAddress(address indexed user, address indexed newAddress);
    event UpdateEmissionRate(address indexed user, uint256 platinPerBlock);

    constructor(
        PlatinToken _platin,
        uint256 _startBlock,
        address _devAddress,
        address _feeAddress
        // address _vaultAddress
    ) public {
        platin = _platin;
        startBlock = _startBlock;

        devAddress = _devAddress;
        feeAddress = _feeAddress;
        // vaultAddress = _vaultAddress;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    mapping(IERC20 => bool) public poolExistence;
    modifier nonDuplicated(IERC20 _lpToken) {
        require(poolExistence[_lpToken] == false, "nonDuplicated: duplicated");
        _;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    function add(uint256 _allocPoint, IERC20 _lpToken, uint16 _depositFeeBP) external onlyOwner nonDuplicated(_lpToken) {
        require(_depositFeeBP <= 400, "add: invalid deposit fee basis points");
        uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolExistence[_lpToken] = true;
        poolInfo.push(PoolInfo({
        lpToken: _lpToken,
        allocPoint: _allocPoint,
        lastRewardBlock: lastRewardBlock,
        accPlatinPerShare: 0,
        depositFeeBP: _depositFeeBP
        }));
    }

    // Update the given pool's PLATIN allocation point and deposit fee. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, uint16 _depositFeeBP) external onlyOwner {
        require(_depositFeeBP <= 400, "set: invalid deposit fee basis points");
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
        poolInfo[_pid].depositFeeBP = _depositFeeBP;
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to) public pure returns (uint256) {
        return _to.sub(_from);
    }

    // View function to see pending PLATIN on frontend.
    function pendingPlatin(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accPlatinPerShare = pool.accPlatinPerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (block.number > pool.lastRewardBlock && lpSupply != 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
            uint256 platinReward = multiplier.mul(platinPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
            accPlatinPerShare = accPlatinPerShare.add(platinReward.mul(1e18).div(lpSupply));
        }
        return user.amount.mul(accPlatinPerShare).div(1e18).sub(user.rewardDebt);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (lpSupply == 0 || pool.allocPoint == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
        uint256 platinReward = multiplier.mul(platinPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
        platin.mint(devAddress, platinReward.div(10));
        platin.mint(address(this), platinReward);
        pool.accPlatinPerShare = pool.accPlatinPerShare.add(platinReward.mul(1e18).div(lpSupply));
        pool.lastRewardBlock = block.number;
    }

    // Deposit LP tokens to MasterChef for PLATIN allocation.
    function deposit(uint256 _pid, uint256 _amount) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accPlatinPerShare).div(1e18).sub(user.rewardDebt);
            if (pending > 0) {
                safePlatinTransfer(msg.sender, pending);
            }
        }
        if (_amount > 0) {
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
            if (pool.depositFeeBP > 0) {
                uint256 depositFee = _amount.mul(pool.depositFeeBP).div(10000);
                pool.lpToken.safeTransfer(feeAddress, depositFee);
                // pool.lpToken.safeTransfer(vaultAddress, depositFee);
                user.amount = user.amount.add(_amount).sub(depositFee);
            } else {
                user.amount = user.amount.add(_amount);
            }
        }
        user.rewardDebt = user.amount.mul(pool.accPlatinPerShare).div(1e18);
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from MasterChef.
    function withdraw(uint256 _pid, uint256 _amount) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accPlatinPerShare).div(1e18).sub(user.rewardDebt);
        if (pending > 0) {
            safePlatinTransfer(msg.sender, pending);
        }
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
        }
        user.rewardDebt = user.amount.mul(pool.accPlatinPerShare).div(1e18);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.lpToken.safeTransfer(address(msg.sender), amount);
        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    // Safe platin transfer function, just in case if rounding error causes pool to not have enough.
    function safePlatinTransfer(address _to, uint256 _amount) internal {
        uint256 platinBal = platin.balanceOf(address(this));
        bool transferSuccess = false;
        if (_amount > platinBal) {
            transferSuccess = platin.transfer(_to, platinBal);
        } else {
            transferSuccess = platin.transfer(_to, _amount);
        }
        require(transferSuccess, "safePlatinTransfer: Transfer failed");
    }

    // Update dev address by the previous dev.
    function setDevAddress(address _devAddress) external onlyOwner {
        devAddress = _devAddress;
        emit SetDevAddress(msg.sender, _devAddress);
    }

    function setFeeAddress(address _feeAddress) external onlyOwner {
        feeAddress = _feeAddress;
        emit SetFeeAddress(msg.sender, _feeAddress);
    }

    // function setVaultAddress(address _vaultAddress) external onlyOwner {
    //    vaultAddress = _vaultAddress;
    //    emit SetVaultAddress(msg.sender, _vaultAddress);
    //}
    
    function updateEmissionRate(uint256 _platinPerBlock) external onlyOwner {
        massUpdatePools();
        platinPerBlock = _platinPerBlock;
        emit UpdateEmissionRate(msg.sender, _platinPerBlock);
    }

    // Only update before start of farm
    function updateStartBlock(uint256 _startBlock) external onlyOwner {
	    require(startBlock > block.number, "Farm already started");
        startBlock = _startBlock;
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract PlatinToken","name":"_platin","type":"address"},{"internalType":"uint256","name":"_startBlock","type":"uint256"},{"internalType":"address","name":"_devAddress","type":"address"},{"internalType":"address","name":"_feeAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetDevAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetFeeAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"platinPerBlock","type":"uint256"}],"name":"UpdateEmissionRate","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_lpToken","type":"address"},{"internalType":"uint16","name":"_depositFeeBP","type":"uint16"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"feeAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_from","type":"uint256"},{"internalType":"uint256","name":"_to","type":"uint256"}],"name":"getMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingPlatin","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"platin","outputs":[{"internalType":"contract PlatinToken","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"platinPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"name":"poolExistence","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accPlatinPerShare","type":"uint256"},{"internalType":"uint16","name":"depositFeeBP","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"uint16","name":"_depositFeeBP","type":"uint16"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_devAddress","type":"address"}],"name":"setDevAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_feeAddress","type":"address"}],"name":"setFeeAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_platinPerBlock","type":"uint256"}],"name":"updateEmissionRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_startBlock","type":"uint256"}],"name":"updateStartBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000782eb3304f8b9add877f13a5ca321f72c4aa98040000000000000000000000000000000000000000000000000000000001006d50000000000000000000000000d5e72c75c3d4bafdb62dee079d2bf9ef614125b6000000000000000000000000a263bf064d146dbe197caedd1416bf3e4b1e7c0e

-----Decoded View---------------
Arg [0] : _platin (address): 0x782eb3304f8b9add877f13a5ca321f72c4aa9804
Arg [1] : _startBlock (uint256): 16805200
Arg [2] : _devAddress (address): 0xd5e72c75c3d4bafdb62dee079d2bf9ef614125b6
Arg [3] : _feeAddress (address): 0xa263bf064d146dbe197caedd1416bf3e4b1e7c0e

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 000000000000000000000000782eb3304f8b9add877f13a5ca321f72c4aa9804
Arg [1] : 0000000000000000000000000000000000000000000000000000000001006d50
Arg [2] : 000000000000000000000000d5e72c75c3d4bafdb62dee079d2bf9ef614125b6
Arg [3] : 000000000000000000000000a263bf064d146dbe197caedd1416bf3e4b1e7c0e

44412:10806:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47827:618;;;;;;;;;;;;;;;;-1:-1:-1;47827:618:0;;;;;;;-1:-1:-1;;;;;47827:618:0;;;;;;;;:::i;:::-;;47457:95;;;:::i;:::-;;;;;;;;;;;;;;;;54777:214;;;;;;;;;;;;;;;;-1:-1:-1;54777:214:0;;:::i;46155:26::-;;;;;;;;;;;;;;;;-1:-1:-1;46155:26:0;;:::i;:::-;;;;-1:-1:-1;;;;;46155:26:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45900:25;;;:::i;:::-;;;;-1:-1:-1;;;;;45900:25:0;;;;;;;;;;;;;;46396:34;;;:::i;48559:374::-;;;;;;;;;;;;;;;;-1:-1:-1;48559:374:0;;;;;;;;;;;;;;:::i;46076:43::-;;;:::i;45932:25::-;;;:::i;45964:::-;;;:::i;52411:761::-;;;;;;;;;;;;;;;;-1:-1:-1;52411:761:0;;;;;;;:::i;46489:25::-;;;:::i;50311:826::-;;;;;;;;;;;;;;;;-1:-1:-1;50311:826:0;;:::i;53243:398::-;;;;;;;;;;;;;;;;-1:-1:-1;53243:398:0;;:::i;50055:180::-;;;:::i;49195:777::-;;;;;;;;;;;;;;;;-1:-1:-1;49195:777:0;;;;;;-1:-1:-1;;;;;49195:777:0;;:::i;2656:148::-;;;:::i;54416:160::-;;;;;;;;;;;;;;;;-1:-1:-1;54416:160:0;-1:-1:-1;;;;;54416:160:0;;:::i;2014:79::-;;;:::i;49009:121::-;;;;;;;;;;;;;;;;-1:-1:-1;49009:121:0;;;;;;;:::i;46237:64::-;;;;;;;;;;;;;;;;-1:-1:-1;46237:64:0;;;;;;-1:-1:-1;;;;;46237:64:0;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;47560:44;;;;;;;;;;;;;;;;-1:-1:-1;47560:44:0;-1:-1:-1;;;;;47560:44:0;;:::i;:::-;;;;;;;;;;;;;;;;;;54248:160;;;;;;;;;;;;;;;;-1:-1:-1;54248:160:0;-1:-1:-1;;;;;54248:160:0;;:::i;51208:1151::-;;;;;;;;;;;;;;;;-1:-1:-1;51208:1151:0;;;;;;;:::i;2959:244::-;;;;;;;;;;;;;;;;-1:-1:-1;2959:244:0;-1:-1:-1;;;;;2959:244:0;;:::i;55040:175::-;;;;;;;;;;;;;;;;-1:-1:-1;55040:175:0;;:::i;47827:618::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;47670:23:0;::::1;;::::0;;;:13:::1;:23;::::0;;;;;47933:8;;47670:23:::1;;:32;47662:70;;;::::0;;-1:-1:-1;;;47662:70:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;::::1;::::0;;;;;;;;;;;;;::::1;;47979:3:::2;47962:13;:20;;;;47954:70;;;;-1:-1:-1::0;;;47954:70:0::2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48035:23;48076:10;;48061:12;:25;:53;;48104:10;;48061:53;;;48089:12;48061:53;48143:15;::::0;48035:79;;-1:-1:-1;48143:32:0::2;::::0;48163:11;48143:19:::2;:32::i;:::-;48125:15;:50:::0;-1:-1:-1;;;;;48186:23:0;;::::2;;::::0;;;:13:::2;:23;::::0;;;;;;;:30;;48212:4:::2;-1:-1:-1::0;;48186:30:0;;::::2;::::0;::::2;::::0;;;48241:195;;::::2;::::0;::::2;::::0;;;;;;;::::2;::::0;;;;;;;;;;;;;;::::2;::::0;;::::2;::::0;;;;;;48227:8:::2;:210:::0;;;;::::2;::::0;;;;;;;;::::2;::::0;;::::2;::::0;;::::2;::::0;;-1:-1:-1;;;;;;48227:210:0::2;::::0;;;::::2;;::::0;;;;;;;;;;;;;;;;;;;;-1:-1:-1;48227:210:0;;;;;;;;-1:-1:-1;;48227:210:0::2;::::0;;;::::2;;::::0;;47827:618::o;47457:95::-;47529:8;:15;47457:95;:::o;54777:214::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;54860:17:::1;:15;:17::i;:::-;54888:14;:32:::0;;;54936:47:::1;::::0;;;;;;;54955:10:::1;::::0;54936:47:::1;::::0;;;;;::::1;::::0;;::::1;54777:214:::0;:::o;46155:26::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;46155:26:0;;;;-1:-1:-1;46155:26:0;;;;;;;:::o;45900:25::-;;;-1:-1:-1;;;;;45900:25:0;;:::o;46396:34::-;;;;:::o;48559:374::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;48684:3:::1;48667:13;:20;;;;48659:70;;;;-1:-1:-1::0;;;48659:70:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48758:63;48809:11;48758:46;48778:8;48787:4;48778:14;;;;;;;;;;;;;;;;;;:25;;;48758:15;;:19;;:46;;;;:::i;:::-;:50:::0;::::1;:63::i;:::-;48740:15;:81;;;;48860:11;48832:8;48841:4;48832:14;;;;;;;;;;;;;;;;;;:25;;:39;;;;48912:13;48882:8;48891:4;48882:14;;;;;;;;;;;;;;;;;;:27;;;:43;;;;;;;;;;;;;;;;;;48559:374:::0;;;:::o;46076:43::-;;;;:::o;45932:25::-;;;-1:-1:-1;;;;;45932:25:0;;:::o;45964:::-;;;-1:-1:-1;;;;;45964:25:0;;:::o;52411:761::-;23088:1;23694:7;;:19;;23686:63;;;;;-1:-1:-1;;;23686:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;23088:1;23827:7;:18;;;;52491:21:::1;52515:8;52524:4;52515:14;;;;;;;;;::::0;;;::::1;::::0;;;52564;;;:8:::1;:14:::0;;;;;;52579:10:::1;52564:26:::0;;;;;;;52609:11;;52515:14:::1;::::0;;::::1;::::0;;::::1;::::0;-1:-1:-1;52609:22:0;-1:-1:-1;52609:22:0::1;52601:53;;;::::0;;-1:-1:-1;;;52601:53:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;52601:53:0;;;;;;;;;;;;;::::1;;52665:16;52676:4;52665:10;:16::i;:::-;52692:15;52710:70;52764:4;:15;;;52710:49;52754:4;52710:39;52726:4;:22;;;52710:4;:11;;;:15;;:39;;;;:::i;:::-;:43:::0;::::1;:49::i;:::-;:53:::0;::::1;:70::i;:::-;52692:88:::0;-1:-1:-1;52795:11:0;;52791:83:::1;;52823:39;52842:10;52854:7;52823:18;:39::i;:::-;52888:11:::0;;52884:152:::1;;52930:11:::0;;:24:::1;::::0;52946:7;52930:15:::1;:24::i;:::-;52916:38:::0;;52969:12;;:55:::1;::::0;-1:-1:-1;;;;;52969:12:0::1;53003:10;53016:7:::0;52969:25:::1;:55::i;:::-;53080:22;::::0;::::1;::::0;53064:11;;:49:::1;::::0;53108:4:::1;::::0;53064:39:::1;::::0;:15:::1;:39::i;:49::-;53046:15;::::0;::::1;:67:::0;53129:35:::1;::::0;;;;;;;53150:4;;53138:10:::1;::::0;53129:35:::1;::::0;;;;::::1;::::0;;::::1;-1:-1:-1::0;;23044:1:0;24006:22;;-1:-1:-1;;;52411:761:0:o;46489:25::-;;;;:::o;50311:826::-;50363:21;50387:8;50396:4;50387:14;;;;;;;;;;;;;;;;;;50363:38;;50432:4;:20;;;50416:12;:36;50412:75;;50469:7;;;50412:75;50516:12;;:37;;;-1:-1:-1;;;50516:37:0;;50547:4;50516:37;;;;;;50497:16;;-1:-1:-1;;;;;50516:12:0;;:22;;:37;;;;;;;;;;;;;;:12;:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;50516:37:0;;-1:-1:-1;50568:13:0;;;:37;;-1:-1:-1;50585:15:0;;;;:20;50568:37;50564:126;;;-1:-1:-1;50645:12:0;50622:20;;;;:35;50672:7;;50564:126;50700:18;50721:49;50735:4;:20;;;50757:12;50721:13;:49::i;:::-;50700:70;;50781:20;50804:72;50860:15;;50804:51;50839:4;:15;;;50804:30;50819:14;;50804:10;:14;;:30;;;;:::i;:::-;:34;;:51::i;:72::-;50887:6;;50899:10;;50781:95;;-1:-1:-1;;;;;;50887:6:0;;;;:11;;50899:10;50911:20;50781:95;50928:2;50911:16;:20::i;:::-;50887:45;;;;;;;;;;;;;-1:-1:-1;;;;;50887:45:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;50943:6:0;;:40;;;-1:-1:-1;;;50943:40:0;;50963:4;50943:40;;;;;;;;;;;;-1:-1:-1;;;;;50943:6:0;;;;-1:-1:-1;50943:11:0;;-1:-1:-1;50943:40:0;;;;;:6;;:40;;;;;;;;:6;;:40;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;51019:64;51046:36;51073:8;51046:22;51063:4;51046:12;:16;;:22;;;;:::i;:36::-;51019:22;;;;;:26;:64::i;:::-;50994:22;;;:89;-1:-1:-1;;51117:12:0;51094:20;;;;:35;;;;-1:-1:-1;50311:826:0;;:::o;53243:398::-;23088:1;23694:7;;:19;;23686:63;;;;;-1:-1:-1;;;23686:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;23088:1;23827:7;:18;;;;53315:21:::1;53339:8;53348:4;53339:14;;;;;;;;;::::0;;;::::1;::::0;;;53388;;;:8:::1;:14:::0;;;;;;53403:10:::1;53388:26:::0;;;;;;;53442:11;;53464:15;;;-1:-1:-1;53490:15:0;::::1;:19:::0;;;;53339:14:::1;::::0;;::::1;;53520:12:::0;;53339:14;;-1:-1:-1;53388:26:0;;53442:11;53520:54:::1;::::0;-1:-1:-1;;;;;53520:12:0;;;::::1;::::0;53442:11;53520:25:::1;:54::i;:::-;53590:43;::::0;;;;;;;53620:4;;53608:10:::1;::::0;53590:43:::1;::::0;;;;::::1;::::0;;::::1;-1:-1:-1::0;;23044:1:0;24006:22;;-1:-1:-1;;53243:398:0:o;50055:180::-;50117:8;:15;50100:14;50143:85;50171:6;50165:3;:12;50143:85;;;50201:15;50212:3;50201:10;:15::i;:::-;50179:5;;50143:85;;;;50055:180;:::o;49195:777::-;49270:7;49290:21;49314:8;49323:4;49314:14;;;;;;;;;;;;;;;;49363;;;:8;:14;;;;;;-1:-1:-1;;;;;49363:21:0;;;;;;;;;;;49314:14;;;;;;;;49423:22;;;;49475:12;;:37;;-1:-1:-1;;;49475:37:0;;49506:4;49475:37;;;;;;49314:14;;-1:-1:-1;49363:21:0;;49423:22;;49314:14;;49475:12;;;:22;;:37;;;;;;;;;;;:12;:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;49475:37:0;49542:20;;;;49475:37;;-1:-1:-1;49527:12:0;:35;:52;;;;-1:-1:-1;49566:13:0;;;49527:52;49523:359;;;49596:18;49617:49;49631:4;:20;;;49653:12;49617:13;:49::i;:::-;49596:70;;49681:20;49704:72;49760:15;;49704:51;49739:4;:15;;;49704:30;49719:14;;49704:10;:14;;:30;;;;:::i;:72::-;49681:95;-1:-1:-1;49811:59:0;49833:36;49860:8;49833:22;49681:95;49850:4;49833:16;:22::i;:36::-;49811:17;;:21;:59::i;:::-;49791:79;;49523:359;;;49899:65;49948:4;:15;;;49899:44;49938:4;49899:34;49915:17;49899:4;:11;;;:15;;:34;;;;:::i;:65::-;49892:72;;;;;;49195:777;;;;;:::o;2656:148::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;2763:1:::1;2747:6:::0;;2726:40:::1;::::0;-1:-1:-1;;;;;2747:6:0;;::::1;::::0;2726:40:::1;::::0;2763:1;;2726:40:::1;2794:1;2777:19:::0;;-1:-1:-1;;;;;;2777:19:0::1;::::0;;2656:148::o;54416:160::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;54490:10:::1;:24:::0;;-1:-1:-1;;;;;;54490:24:0::1;-1:-1:-1::0;;;;;54490:24:0;::::1;::::0;;::::1;::::0;;;54530:38:::1;::::0;54544:10:::1;::::0;54530:38:::1;::::0;-1:-1:-1;;54530:38:0::1;54416:160:::0;:::o;2014:79::-;2052:7;2079:6;-1:-1:-1;;;;;2079:6:0;2014:79;:::o;49009:121::-;49081:7;49108:14;:3;49116:5;49108:7;:14::i;:::-;49101:21;49009:121;-1:-1:-1;;;49009:121:0:o;46237:64::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;47560:44::-;;;;;;;;;;;;;;;:::o;54248:160::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;54322:10:::1;:24:::0;;-1:-1:-1;;;;;;54322:24:0::1;-1:-1:-1::0;;;;;54322:24:0;::::1;::::0;;::::1;::::0;;;54362:38:::1;::::0;54376:10:::1;::::0;54362:38:::1;::::0;-1:-1:-1;;54362:38:0::1;54248:160:::0;:::o;51208:1151::-;23088:1;23694:7;;:19;;23686:63;;;;;-1:-1:-1;;;23686:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;23088:1;23827:7;:18;;;;51287:21:::1;51311:8;51320:4;51311:14;;;;;;;;;::::0;;;::::1;::::0;;;51360;;;:8:::1;:14:::0;;;;;;51375:10:::1;51360:26:::0;;;;;;;51311:14:::1;::::0;;::::1;::::0;;::::1;::::0;-1:-1:-1;51397:16:0::1;51369:4:::0;51397:10:::1;:16::i;:::-;51428:11:::0;;:15;51424:241:::1;;51460:15;51478:70;51532:4;:15;;;51478:49;51522:4;51478:39;51494:4;:22;;;51478:4;:11;;;:15;;:39;;;;:::i;:70::-;51460:88:::0;-1:-1:-1;51567:11:0;;51563:91:::1;;51599:39;51618:10;51630:7;51599:18;:39::i;:::-;51424:241;;51679:11:::0;;51675:549:::1;;51707:12:::0;;:74:::1;::::0;-1:-1:-1;;;;;51707:12:0::1;51745:10;51766:4;51773:7:::0;51707:29:::1;:74::i;:::-;51800:17;::::0;::::1;::::0;::::1;;:21:::0;51796:417:::1;;51875:17;::::0;::::1;::::0;51842:18:::1;::::0;51863:41:::1;::::0;51898:5:::1;::::0;51863:30:::1;::::0;:7;;51875:17:::1;;51863:11;:30::i;:41::-;51949:10;::::0;51923:12;;51842:62;;-1:-1:-1;51923:49:0::1;::::0;-1:-1:-1;;;;;51923:12:0;;::::1;::::0;51949:10:::1;51842:62:::0;51923:25:::1;:49::i;:::-;52078:11:::0;;:40:::1;::::0;52107:10;;52078:24:::1;::::0;52094:7;52078:15:::1;:24::i;:40::-;52064:54:::0;;-1:-1:-1;51796:417:0::1;;;52173:11:::0;;:24:::1;::::0;52189:7;52173:15:::1;:24::i;:::-;52159:38:::0;;51796:417:::1;52268:22;::::0;::::1;::::0;52252:11;;:49:::1;::::0;52296:4:::1;::::0;52252:39:::1;::::0;:15:::1;:39::i;:49::-;52234:15;::::0;::::1;:67:::0;52317:34:::1;::::0;;;;;;;52337:4;;52325:10:::1;::::0;52317:34:::1;::::0;;;;::::1;::::0;;::::1;-1:-1:-1::0;;23044:1:0;24006:22;;-1:-1:-1;;51208:1151:0:o;2959:244::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;3048:22:0;::::1;3040:73;;;;-1:-1:-1::0;;;3040:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3150:6;::::0;;3129:38:::1;::::0;-1:-1:-1;;;;;3129:38:0;;::::1;::::0;3150:6;::::1;::::0;3129:38:::1;::::0;::::1;3178:6;:17:::0;;-1:-1:-1;;;;;;3178:17:0::1;-1:-1:-1::0;;;;;3178:17:0;;;::::1;::::0;;;::::1;::::0;;2959:244::o;55040:175::-;2236:12;:10;:12::i;:::-;2226:6;;-1:-1:-1;;;;;2226:6:0;;;:22;;;2218:67;;;;;-1:-1:-1;;;2218:67:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;2218:67:0;;;;;;;;;;;;;;;55135:12:::1;55122:10;;:25;55114:58;;;::::0;;-1:-1:-1;;;55114:58:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;55114:58:0;;;;;;;;;;;;;::::1;;55183:10;:24:::0;55040:175::o;570:106::-;658:10;570:106;:::o;4131:181::-;4189:7;4221:5;;;4245:6;;;;4237:46;;;;;-1:-1:-1;;;4237:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;4595:136;4653:7;4680:43;4684:1;4687;4680:43;;;;;;;;;;;;;;;;;:3;:43::i;5485:471::-;5543:7;5788:6;5784:47;;-1:-1:-1;5818:1:0;5811:8;;5784:47;5855:5;;;5859:1;5855;:5;:1;5879:5;;;;;:10;5871:56;;;;-1:-1:-1;;;5871:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;6432:132;6490:7;6517:39;6521:1;6524;6517:39;;;;;;;;;;;;;;;;;:3;:39::i;53751:441::-;53849:6;;:31;;;-1:-1:-1;;;53849:31:0;;53874:4;53849:31;;;;;;53829:17;;-1:-1:-1;;;;;53849:6:0;;:16;;:31;;;;;;;;;;;;;;:6;:31;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;53849:31:0;;-1:-1:-1;53891:20:0;53934:19;;;53930:181;;;53988:6;;:31;;;-1:-1:-1;;;53988:31:0;;-1:-1:-1;;;;;53988:31:0;;;;;;;;;;;;;;;:6;;;;;:15;;:31;;;;;;;;;;;;;;:6;;:31;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;53988:31:0;;-1:-1:-1;53930:181:0;;;54070:6;;:29;;;-1:-1:-1;;;54070:29:0;;-1:-1:-1;;;;;54070:29:0;;;;;;;;;;;;;;;:6;;;;;:15;;:29;;;;;;;;;;;;;;:6;;:29;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;54070:29:0;;-1:-1:-1;53930:181:0;54129:15;54121:63;;;;-1:-1:-1;;;54121:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;53751:441;;;;:::o;18284:177::-;18394:58;;;-1:-1:-1;;;;;18394:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;18394:58:0;-1:-1:-1;;;18394:58:0;;;18367:86;;18387:5;;18367:19;:86::i;:::-;18284:177;;;:::o;18469:205::-;18597:68;;;-1:-1:-1;;;;;18597:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;18597:68:0;-1:-1:-1;;;18597:68:0;;;18570:96;;18590:5;;18570:19;:96::i;5034:192::-;5120:7;5156:12;5148:6;;;;5140:29;;;;-1:-1:-1;;;5140:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;5192:5:0;;;5034:192::o;7060:278::-;7146:7;7181:12;7174:5;7166:28;;;;-1:-1:-1;;;7166:28:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7205:9;7221:1;7217;:5;;;;;;;7060:278;-1:-1:-1;;;;;7060:278:0:o;20589:761::-;21013:23;21039:69;21067:4;21039:69;;;;;;;;;;;;;;;;;21047:5;-1:-1:-1;;;;;21039:27:0;;;:69;;;;;:::i;:::-;21123:17;;21013:95;;-1:-1:-1;21123:21:0;21119:224;;21265:10;21254:30;;;;;;;;;;;;;;;-1:-1:-1;21254:30:0;21246:85;;;;-1:-1:-1;;;21246:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15267:196;15370:12;15402:53;15425:6;15433:4;15439:1;15442:12;15402:22;:53::i;:::-;15395:60;15267:196;-1:-1:-1;;;;15267:196:0:o;16644:979::-;16774:12;16807:18;16818:6;16807:10;:18::i;:::-;16799:60;;;;;-1:-1:-1;;;16799:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;16933:12;16947:23;16974:6;-1:-1:-1;;;;;16974:11:0;16994:8;17005:4;16974:36;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;16974:36:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;16932:78;;;;17025:7;17021:595;;;17056:10;-1:-1:-1;17049:17:0;;-1:-1:-1;17049:17:0;17021:595;17170:17;;:21;17166:439;;17433:10;17427:17;17494:15;17481:10;17477:2;17473:19;17466:44;17381:148;17569:20;;-1:-1:-1;;;17569:20:0;;;;;;;;;;;;;;;;;17576:12;;17569:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;12152:619;12212:4;12680:20;;12523:66;12720:23;;;;;;:42;;-1:-1:-1;;12747:15:0;;;12712:51;-1:-1:-1;;12152:619:0:o

ipfs://8482141f16f449533ce01ddf075ee3a8fc344dca0140078967500fbdfc67f3db